Created Slim Hanging Organizers

08.01.2017

0600

Materials:

  • Three 7 inch-8 centimeter, white zippers (for one pillowcase design)
  • Two 12 inch, pink zippers (for the second pillowcase design)
  • Two Velvet Hangers

Tools:

  • Sewing Machine or sew by hand

I always try to take up less space than necessary when it comes to my home. It’s not that I dont’ have the room to spread out, but I personally don’t think it’s necessary. I don’t like my items and possessions spread out over a large space because it takes more energy to find things and living a more compact lifestyle helps me keep my possessions to a minimum. As a designer, it’s an interesting challenge to minimize the space that I take up.

So I decided to create a slim organizer for my closet. I had a hanging closet shelf but I wanted to get rid of it. In order to get rid of it, I still needed some type of organizer in its place. The items that I needed to organize were small clothing items as well as small accessories. This slim organizer only needed to hold the weight of those items. I did move some stuff out of the original hanging shelf to other areas of the house, so what you see in the images below isn’t a direct transfer of items to the new slim organizer.

Hanging organizers actually already do exist in stores, but from what I’ve seen, these organizers tend to have the user access the pockets from the front of the organizer. It would be easier for a person who has a walk-in closet to use those organizers, but I wanted to make a slim organizer which I could access from the side.

So in the end, this organizer helped me reduce my space by half:

dsc_48972017-07-25

Here is what I did…

DSC_6000

I gathered my pillowcases and designated one of the pillowcases to be divided into three sections and the other pillowcase would be divided into two sections.

I took one pillowcase and hemmed the open end of the pillowcase. I then folded the pillow case into thirds and marked the lines using sewing pins. This pillowcase would have the three 7 inch-8 centimeter, white zippers sewed to it.

 

DSC_6008 - Copy

I sewed along the lines to close off the three separate sections, then I placed my zippers down to mark the location of the zippers. Depending on how I wanted to access my slim organizer in the closet, I had to choose which side of the pillowcase to attach the zippers. Since I wanted this slim organizer to be on the right side of my closet, I wanted the openings on the right side of the pillowcase so that when it was hanging up, I could access the slots easier. I also left about an inch margin between the zipper and the edge of the pillowcase because the items inside will create a bulge that I had to take into consideration.

I used an ink pen to make tiny dots at each end of the zipper. I actually marked the dots in between the zipper teeth at each end, this way, it also centered the location of the zipper. I connected each set of dots to create the cut lines in order to fit my zippers into the pillowcase. I just used scissors to cut these lines.

 

DSC_6046DSC_6050

DSC_6009- Copy

After I cut the lines, I inserted the hanger into the opening that was on the end of the pillowcase that was originally closed. I folded the pillowcase in half (vertically) to find the center and pretty much wedged the metal hook through the pillowcase. I chose to place my hanger on the original closed end of the pillowcase because if I used the hemmed end of the pillowcase for the hanger, the weight of the items in the organizer might weaken the that end of the pillowcase over time. I had to consider the weight of each pocket that was created, so I constantly thought about the overall weight that would pull on the material itself.

Once I placed my zippers into each slot that was made, I folded the edges of the pillowcase down to the zippers and pinned them together with sewing pins. Then I hand sewed the zippers to the pillowcase (making sure I sewed both the hemmed layer and the top layer of the pillowcase to the zipper).

DSC_6016

DSC_6021.JPG

Once I was done, I used the same process to create the double pocket slim organizer. The triple pocket slim hanging organizer will be used for small items and the double pocket slim organizer will be used for some extra pieces of clothing items.

I don’t know if this is a favored design, but I personally like how much less space it takes up. this design works for me and, my space. Hopefully this design may jog some space organizing ideas for you as well.

DSC_6028

DSC_6052

DSC_60622017-07-25

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s