Rollup Christmas Tree

11.28.2017

0600

Materials:

  • 8 baseboards at 28″ long
  • 15 pieces of 12″ long thin twine rope
  • Extra: Matches to melt the ends of the twine together so it doesn’t come apart over time)

Tools:

  • Miter Saw
  • Drill & Drill Bits (Need 1/8″ drill bit for all holes)

DSC_7280 - Copy.JPG

  • Measure each base board at appropriate length
  • Organize each baseboard to it’s general location on the tree formation and mark the corners of where you plan to make the 45° cuts. I made my marks for my 45° cuts on the bottom edges of my baseboard pieces so my baseboard lengths would stay consistent.
  • Using a Miter Saw, take each baseboard and cut each end of each baseboard at 45°
  • Starting with the top of the tree, mark off each of the holes for each piece.

DSC_7315

DSC_7287 - Copy.JPG

DSC_7285 - Copy

DSC_7289

  • Drill each hole to create openings
  • Using the twine pieces, start tying the pieces together. To keep each space consistent, I tied the knots towards the end of the rope and the same amount of twine end to melt later.

DSC_7293

It’s a simple tree where the clean up is just rolling up the tree.  When I put up the Christmas lights, I simple wrap them around the edges of the pieces. I usually go in one direction so that the lines are more evenly spaced. Same as my blog post Minimalist Christmas Tree, I hang my ornaments off of the lights. For the more fragile ornaments, I hang them from paperclips and then hang them from the cord.

This was created as an option to not use push pins on the wall, but it was an interesting take on a holiday tree as well. Give it a try if you’re interested, and you can even change out the material I used too.

DSC_7347

DSC_7402DSC_7409DSC_7417

DSC_7488

Minimalist Christmas Tree

11.21.2017

0600

Materials:

  • Christmas lights (Used a 25′-0″ length Christmas Light cord)
  • Ornaments
  • Paper clips (Used 14 for the tree + a few extra)

Tools:

  • Measuring Tape

Christmas is one of those holidays that comes with more decorating than the others. It’s not just the food that’s plentiful, but the decorations as well. Which means of course, that I was determined to minimize my decorations for this holiday.

My family has always used a fake tree so we always knew exactly how much mess to expect when decorating for this holiday. However, I wanted to figure out a way to simplify that. This lead to my Christmas tree design, made up of Christmas lights.

DSC_7454 - Copy

I wanted the base to be 36″ wide, simply because it was the width of a standard door. For a 25′-0″ cord I was using, it seemed like a good base point. I first plugged in my cord and measured out 36″ in the direction I wanted my tree to be located, and then 6″ up. At that point, I placed a pushpin. I then hooked a paperclip to my cord so that it would reach the pushpin. This 36″ length of the cord would create the bottom branch of the tree.

DSC_7783

From there, I measured out 34″ of the next section of the cord and moved in the opposite direction of the bottom branch and measured 6″ up, where I placed the next push pin. I straightened my 34″ section of the cord and placed a paper clip onto it and hooked it onto that pushpin.

I repeated these steps, for each branch of the tree, where each time I subtracted two inches for each branch and measured six inches up to place the next push pin. The height of your tree will really depend on the width of your bottom branch. If you have a longer length of cord and you want the bottom branch to be wider, you can do just that. However, if you have a longer cord and you still start out at a 36″ wide bottom branch, your tree will be taller, which may look just as beautiful.

If you really want to test out how far your can push this design, link up two cords and see how tall you can make it. However, the longer the cord, the wider the base should be. The sequence for each branch will still be the same. The height of this tree ended up at about six feet high from the floor.

DSC_7475
DSC_7463

DSC_7469

I hung my ornaments around each light and distributed them as needed. If you have trouble hanging the ornaments up, hang the lighter ornaments on the lights themselves and hang the heavier ornaments on the pushpins. If you have delicate or fragile ornaments, consider double looping them around a Christmas light or using a paperclip to hang them up by securing it to the branch (the way you secured the previous paper clips to the pushpins).

DSC_7787
DSC_5196

A lot of my ornaments are fairly light and I create ornaments from old keychains I’ve collected over the years. You can click on that blog post, Christmas Ornaments Hack and read about how I made them. It’s interesting when I stand back and look at the tree, because even the keychain pendants have a unique memories tied to them.

You can place a blanket in front of the tree to place presents on and it’ll still look like and regular Christmas Tree. I like to wrap my gifts in reusable fabric and reusable fabric bags and place them under the tree. I wrote about how to create a Zero Waste Christmas or an Eco-Friendly Christmas, in my other blog posts and you can check it out if you’d like any ideas.

Well there you have it, my minimalist Christmas tree. If this works for you that’s great! I hope this blog post inspires you or jogs up some ideas for you.

DSC_7446

 

 

 

Blogger Recognition Award

11.14.2017

0600

blogger-recognition-award-badge

 

I am very happy to announce that Design Life Hacks has been nominated for the Blogger Recognition Award! After many topics and posts that I’ve covered, I’m glad that I still can create interesting content. 😊

What is the Blogger Recognition Award?

Blogger Recognition Award is given to bloggers by bloggers to encourage and acknowledge the hard work and effort that goes into creating posts. It’s an opportunity for bloggers to recognize one another for each of our contributions. A big thanks to Emilia Cantero Dieguez from The Green Choice for the nomination!

How my blog started?

Living in the Bay Area in California, located in the United States of America, life can be pretty stressful. Nationally, a middle class yearly income for a household of three people is considered to be between $42,000 and $125,000, according to the Pew Research Center. Low-income would be anything under $42,000 and upper-income is above $125,000. Here in the Bay Area, an income of $100,000 is now considered low income.

I believe that if I can share a design hack to make life more simplistic and easier to manage, I should. Transitioning into a zero waste lifestyle started this momentum for my blog. Living a zero waste lifestyle made life simple, cleaning became quick and easy, I even saved money and minimized the errands I had to run during my free time. My daily routine improved and I enjoyed going to work each day as well as coming home and relaxing. You can read more about my story here.

Two pieces of advice if you just start with your blog:

  • Schedule out what topic you want to talk about and how to correlate them with your social media. Also, stay on top of your social media.

  • Network, network, network… find bloggers who blog about similar topics as you and collaborate with them. Whatever the purpose of your blog , finding a community to share your ideas and posts with will greatly help expand your viewing statistics and increase visitors to your website.

My nominees!

When you are nominated, there are a few simple steps that you need to take to accept the award nomination. These are the guidelines:

  1. Write a post about your award

  2. Thank the blogger who nominated you and provide a link to her blog

  3. Give a brief story of how your blog started

  4. Give two pieces of advice for new bloggers

  5. Select up to 15 other bloggers to nominate

  6. Comment on each blog and let them know you have nominated them and provide the link to the post you created.

Congratulations to all nominees! You are an inspiration to me! Once again, many thanks to Emilia, from The Green Choice, for nominating Design Life Hacks.

With Love Always,

Yen-Van Tran

 

How I Got Started

11.07.2017

0600

Picture 045

San Francisco, it’s a beautiful city with so much history, it’s mesmerizing. This city made a significant impact on my life because my zero waste journey started with this city. I don’t share this story often, but I thought I’d finally give a background to how I started my zero waste journey seven years ago.

I had moved to San Francisco to attend graduate school. It was a big city with so many places, restaurants and activities to explore, I couldn’t even keep track of everything I wanted to do. At the time, I was working as an Emergency Medical Technician (EMT) for a large, and well know ambulance company.

Golden Gate Park

Fulton Avenue and Stanyan Avenue path into Golden Gate Park.

I had moved into a studio apartment in the Richmond District and it was on the third floor of a three story building. It was a beautiful studio. With hardwood floors and a cozy interior, I settled in. My building stood directly across the street from Golden Gate Park. It was an interesting location because on the weekends, the park was closed to cars on Saturdays, so the foot traffic was busy. I could also open up my windows on the weekends and I listen to the music performances from inside of the park. Since I was on the top floor, sunlight consistently illuminated my apartment all day and all year long.  I lucked out on that part because San Francisco can become very cold and foggy during certain seasons.

Golden Gate Park Entrance

One of the Golden Gate Park entrances off of Fulton Avenue. (at Fulton Avenue and Arguello Avenue)

I was raised and lived in the suburbs my entire life so living in a condensed large city was quite a new experience. All of my routines including grocery shopping, working out and even parking was new and took a bit of an adjustment. I parked on the street since my apartment didn’t have a parking lot. This is also how I learned to become a stealth car parking spotter. Understanding and knowing which streets you could park on in the city was a must in order to avoid parking tickets. San Francisco streets are each scheduled for street cleaning all week long on different days and at different hours, so you have to be careful of where you park, or you’ll get a ticket for blocking the street cleaner.

Living in San Francisco also introduced me to trash chutes. A trash chute is a smooth, open shaft in a multistory building, used to convey trash from upper floors to a collection room. My building’s trash chute could only be accessed from the exterior wooden staircase on the side of the building. From each floor, there was an door which allowed access to the staircase. The problem was that these doors were very heavy and never stayed open. It took quite a bit of effort to even open these doors and step out on the balcony in order to access the trash chute; it seemed that they were installed to slam shut. It could have been an issue with the spring on the door, but regardless, it took a lot of force to open the door and hold it open.

rec_zw_bins_group3_07

San Francisco also separates their trash out into categories: trash, recyclables and compostables. Therefore, I had to separate my disposable items. This is where my problem lay. When I first moved into the apartment, I thought the trash chute was great. It was useful, accessible and being that I was located on the third floor, it seemed convenient for me. However, it only gave access to the trash bin, not the compost bin or the recyclables bin.

When I used the trash chute, my trash bag would bounce around the chute all the way down to the trash bin. It made quite a bit of noise and I thought that wasn’t appropriate since I didn’t know if my neighbors worked night shifts or slept during the day. So I would carry my trash all the way down the narrow exterior stairs. These stairs were very old and were designed to be very narrow. This meant I had to carry my three seperate bags directly in front of me. Some weeks this was not ideal since  my bags would be so full, so I had to take two trips. Taking two trips meant that I would carry two bags down together, let the stairwell door slam shut behind me, walk down the exterior stairs and throw my bags away, exit the side yard in order to enter my building from the front. I would then walk up the inside staircase to my apartment, and grab the last bag to repeat this routine. In order for me to throw away all three bags, I routinely had to exit my building twice and enter it twice; all the meanwhile walking up and down two sets of stairs. I didn’t like taking two trips just to throw out trash, so I decided that I had to eliminate one of the bags.

San+Francisco+Passes+Toughest+Recycling+Law

This is where my zero waste journey began. In order to simplify my weekly “taking out the garbage routine,” I decided that getting rid of my trash bag would be the easiest solution. I had to first start swapping out all of my disposable items and figure out how to either replace the items with more sustainable solutions or eliminate them from my life completely. I decided to tackle all of my disposable items in the kitchen first. I started by swapping out my kitchen sponges for smaller washcloths, and then started buying food without packaging. That took a little bit more planning because I had to purchase glass tupperware and change my diet slightly. Changing my diet included giving up certain foods that came in packaging such as certain types of meat, candy, snacks and cereal. I switched those out for bulk snacks such as nuts, granola mixes, whole vegetables and fruit. I started eating whole grains for breakfast and really took solace in my progress towards a zero waste life.

Although swapping out disposable items meant that my laundry load would increase, it really didn’t increase by a lot. I went through my kitchen items and then moved over to my bathroom items. I paid attention to the materials of the items I was replacing my disposable with. I always tried to choose 100% cotton material, bamboo, stainless steel or glass. I then went through my clothes and started donating everything I didn’t need.

My journey to a zero waste life took about a year and half. It sounds like a significant amount of time, but if you think about auditing your entire life, there’s a lot of stuff to go through and get rid of. During my zero waste journey, I also started minimizing my life where I also implemented a minimalistic lifestyle.

I’m writing about this story of how I got started because truth be told, it started because I was lazy. That’s the honest truth. Each blogger has a story of how they got started and this is mine. A lot of bloggers tend to move towards this lifestyle based on their awareness of their own plastic use and it’s commendable that they started living with less plastic. I wanted to write my experience so that my audience may know that not all zero waste journeys need to start with fighting for the environment. Sometimes it happens on a fluke, a chance encounter, but that it’s very possible to live this way. I did notice the benefits of living a zero waste life as I dove deeper and deeper into it and the environmental impacts  became more evident as I continued on. But my story doesn’t start with an ethically conscious mindset. It started because the exterior stairs at my apartment building was too narrow to carry three bags down to the trash bin.

This is my story of how I got started to living a zero waste life. #truth

DSC_6957