Creating Fabric Boxes

01.16.2018

0600

Materials:

  • Hanging Fabric Shelf Organizer
  • Quilt Batting (optional)

Tools:

  • Sewing Machine or thread and needle
  • Sewing Kit
  • Ruler
  • Pencil
  • Iron and Ironing Mat

Hanging Fabric Shelf Organizer

So I had a hanging fabric shelf organizer which I had replaced by sewing slim hanging organizers from pillow cases. You can find that blog post atย Created Slim Hanging Organizers. But once I replaced the canvas hanging organizer, I didn’t know what to do with it. So I decided to create small fabric boxes with the leftover material. I first took it apart, literally took it apart piece by piece. I recycled the cardboard and I was left with rectangular pieces of canvas.

This project works best if you have perfect square material, but I didn’t want to waste any material so my pieces were left as rectangular pieces. Rectangular canvas pieces yield rectangular shaped boxes. Square fabric pieces will result in perfect square boxes.

DSC_7915 - Copy

So I first worked on the larger fabric piece. I first sewed the edges of the fabric so it wouldn’t com apart. I wanted these boxes to have a rougher look to them so I didn’t hem the edges. You can insert a fitted quilt batting piece in between your fabric pieces if you are using a softer fabric and if you want your box sides to be a stiff frame. I didn’t use batting because my material is canvas in this project.

I folded it in half (doesn’t matter which direction), and then I marked off a 3 inch by 3 inch triangle on each corner of the folded side. These triangle marks are the red lines in the photo. The larger the triangle, the higher the height of the fabric box will stand.

 

DSC_7921-2

I opened it up and I folded the fabric piece in the perpendicular direction, with the first set of triangle marks still facing upwards.

DSC_7925

I then proceeded to fold the fabric and mark off the second set ofย 3 inch by 3 inch triangle on each corner of the folded side. These are located with the blue lines in the photo.

DSC_7929

From there, I sewed over the lines of where I had marked each set of triangles. I sewed the blue lines first. I then opened up the fabric piece, lined up the other corners in order to sew over the red lines.

DSC_7937DSC_7944

Once you sew all of the four corners, when you open the fabric, it should look something like this. However, now you have to flip the box inside-out. Once you do that, the rectangular tabs you created should be on the inside.

DSC_7945DSC_7948

With the four triangle flaps sticking straight up, fold them down to create a straight edge of the box. You can pin it down with sewing pins to watch the shape take form. Once you fold down all of the standing flaps, you should have a similar box like the photo below.

DSC_7952

Now you just need to sew the standing flaps down to create sharper straight edges of the box and then sew the flaps on the inside of the box to keep them flat against the sides.

DSC_7957

I’ve used the large fabric boxes to organize items in my linen closet as well as my camera gear items. Although these aren’t perfect squares, I like the idea that these fabric boxes are easily modified to most objects.

DSC_7960

For the smaller piece of fabric, I hemmed the edges to keep the fabric together and then I measured a 2 inch margin all around the edges. Here, you can insert a piece of fitted quilt batting before sewing the edges together, to give your fabric box a more framed look.

DSC_7962

I folded each edge over and ironed the lines to define the bottom of the box.

DSC_7963

Using sewing pins, I folded in each corner and held them there. These smaller triangles will help define the corners of the box.

DSC_7971

For each triangle corner, I found the center of the triangle and folded it in half. Once the triangle folded in half, the edges of the box came together naturally. I hand sewed these edges together by using a running stitch pattern. I sewed the running stitch in one direction, then simple went back the opposite direction to fill in the gaps in the pattern.

DSC_7975DSC_7978DSC_7980DSC_7982

Once I sewed all four corners, I proceeded to sew the triangle flaps on the inside of the box to the walls.

DSC_7987DSC_7988

I’ve used the smaller fabric boxes to keep smaller items organized that sit on shelves and table tops. So there you have it, these were very simple boxes made from the canvas material I had left over from the hanging fabric shelf organizer. You can use pretty much any fabric you want, but you may need to use quilt batting to strengthen the sides of the boxes.

DSC_7997

Advertisements