Upcycling Fabric Shower Curtains

12.05.2017

0600

Materials:

  • Two 72″ x 72″ Fabric Shower Curtains

Tools:

  • Sewing Machine
  • Sewing Kit

 

DSC_6896

Fabric Shower curtains are usually  made with polyester fabric. A few years ago, I had ordered extra fabric shower curtains and I really wanted to use up the material. I had previously posted a quick blog post about using fabric shower curtains as temporary screens for doors in Alternative Screen For Doors.

But now I wanted to see if I could upcycle the material again for another purpose.  This upcycling project works well if you have solid color curtains. I wanted to create a sheer curtain layer to hang with each of the three sets of my existing window curtains. I thought it would be interesting to upcycle my extra fabric shower curtains to sheer curtains for my windows. I still like the patterns I choose and with the sheer curtains up against my windows, the patterns would be illuminated as the sun hit them each morning.

So I took down each of my existing window curtains and measured them to see how much fabric I needed from the shower curtains. The width of the window wasn’t a problem since I had 72″ to work with. The only variable was the height of each curtain.

For my multicolored shower curtain, I divided the shower curtain in half length wise and width wise equally. I had planned to use the top half of this curtain to create my first sheer window curtain set. The bottom half would be combined with the top half of the bamboo curtain, to create the third set of window curtains.

InterDesign Vivo Botanical Fabric Shower Curtain-72x 72, Purple-Tan- LG - Copy

For my bamboo print shower curtain, I measured the height that I initially wanted starting from the bottom of the curtain. I did this because I wanted the second curtain set to be completely covered by the pattern. I left the white void at the top of the bamboo curtain because I knew I was going to use it in the third set of window curtains. I had planned to sew the top half of the bamboo shower curtains to the bottom half of the multicolored shower curtain to create the last set of sheer window curtains.

InterDesign Anzu Shower Curtain, Green- LG2 - Copy

I then pinned the edges that had been cut using sewing pins and hemmed them to clean up the trim around the shower curtain.

DSC_6889

Since the width of each shower curtain piece was wider than the individual window curtain pieces, I tucked and folded the shower curtain pieces to fit each window curtain width accordingly. I only sewed about 6″ up the shower curtain piece to hold the folded in piece in place, and across the bottom. You can sew the entire height of the folded piece, but I simple choose not to.

DSC_6893

DSC_6892

Since I know I want to keep these curtain designs as is, I decided to sew the new sheer curtain layer to my existing window curtains.  You don’t have to sew them, you can use safety pins as a temporary solution if you’re not sure about keeping the sheer layers, or if you want to change them out. Make sure you decide which side of the sheer curtain you want to face towards the window and which side of your existing window curtain you want to face inwards into your home. I personally don’t care about what my curtain looks like to the outside world so I have the nicer pattern facing inwards. This is why adding a sheer layer helps the presentation of my curtains to the outside world.

DSC_6891

To secure my curtains, I had initially made cord tiebacks with leftover material from an old bed sheet, in order to keep my curtains open. With the new sheer layer, I can tie back the solid color window curtain and leave the sheer layer or I can wrap them both back to let in even more sunlight.

 

Alternative Screen For Doors

03.16.2016

0830

DSC_3696

Materials:

  • Fabric shower curtain
  • Shoelace
  • Metal rings
  • Binder Clips
  • Nails (thin enough to fit through the holes of the shower curtain)

Tools:

  • Hammer

As Spring is rolling in and Summer is around the bend, I wanted to show a design hack that doesn’t require much commitment. I have a small balcony that leads up to my area and it doesn’t have a screen to keep out pesky bugs. I’m a fan of fabric shower curtains for the fact that I like to toss them into the washing machine and hang them up to dry. I have a few fabric shower curtains that I keep around for design hacks such as these.

DSC_3694DSC_3699DSC_3698

A shower curtain fits almost the height of a standard door frame. For anyone who lives in a space where they cannot impede on the design structure of the space  (ie. due to tenant contracts via landlord), this seems to ease the pain of when your area is overheating during the hotter season. I took 2 tiny nails and hung up one of my fabric shower curtains. Make sure that the nail on the end where the hinge of the door frame is located, is about 6″ from the edge of the frame. This is because when you swing the door open, you have to take in to account the width of the door itself. The curtain must hang easily and without tension as the door is open at 90 degrees. On the door handle side, try to use a binder clip to extend an arm to hook it to any lock hinge with an S hook, or you can simple place a push pin in the wall and hook the binder clip handle to it.

The nail holes are also a simple fix if you decide to move out and need to patch up the holes with caulking. On the open side of the shower curtain I clipped a metal binder clip and on the hinge side of the door, I looped a metal ring. The side with the metal loop tends to wedge perfectly in between the door and the frame on the hinge side. However, when placing the metal ring, try to wedge it horizontally. I actually use a folded up washcloth to wedge under the door to hold it open too.

DSC_3669DSC_3671

On the bottom of the curtain, if you want some weight to the curtain, you can simply attach some metal binder clips with a key chain on each (I know you guys have these key chains lying around somewhere). If you don’t have any key chains, try to find a small weight to hang from the binder clips. The reason why I use binder clips in this design hack, is because I don’t want to sacrifice the integrity of the shower curtain itself.

If you still want the curtain to be lower, you can take some extra shoelace/string/rope/twine and create an extension for the top like this:

DSC_4121

Because the nails are on the top of the door frame, you have about three inches to give in the distance that the curtain starts to hang. If you add these extensions on, the curtain should fit right under the door frame. But if you do add these extensions, you will need to add another nail so that the middle of the curtain isn’t loose. So it will look like this:

DSC_4123

My extensions seem to be enough for me when it comes to hanging my shower curtain and the design on the shower curtain gives a little bit of illuminated art during the day. I don’t add the binder clips or the key chains at the bottom of mine during the summer. I think I like the drastic movement it makes with the wind when it flows through my space. I hope this design hack helps for any of you who may be living in apartments or homes that get uncomfortably hot during the summer. It’s a way to make your own screen without destroying the integrity of the architecture and design or paying for a brand new screen.