Make-Up Brush Bag Hack

05.09.2017

0700

Materials:

  • Plastic store bought brush bag

Tools:

  • Razor Blade or scissors (Please be careful when using the razor blade)

So I bought an e.l.f. Angled Blush Brush from Target back in 2016 and it came in a clear plastic bag such as the ones in the pictured below. I didn’t want to add it to my trash collection, so I set out on trying to figure out how to convert it into a product that would be useful in mylife.

Elf_Brushes

I knew I wanted to create a holder for all of my brushes (luckily I only use two types of brushes) So I came up with this design to hold my vertical make up tools, such as my mascara, eyeliner pencil, angled blush brush and my EcoTools, Bamboo Smudge Eyeliner Brush.

I sewed the flap that covered the holder to the bag itself. I did this because, I didn’t want to remove the flap to access a clean opening but to also reinforce the bottom of the holder. (At this point I had decided to hang this object as a vertical brush holder).

I opened the other end of the holder by cutting a small slit across the top side of the bag and hold punched a hole on the opposite side. I only put one hole punch on one side because I would be using that side to hang the bag and I didn’t want anything blocking the opening of the bag. Lets call the hole punch end the “Top” and the sewed end of the bag, the “Bottom”. (you kinda have to picture this bag vertically hanging like that)

I used a permanent marker to show you where I placed my cuts on each side of the bag. On the same side as the hold punched hole, I sliced a longer slit on the bottom third of the bag. On the opposite side of the bag, I sliced a shorter cut closer to the top. These cuts do not cut through both walls, please keep that in mind. This design will only work if both walls of the holder are not cut at the same spot.

dsc_5428dsc_5431

For the taller brushes, I am able to insert both of my brushes through the opening at the top, however, I can also slide the brush I tend to use through the slit towards the top.

dsc_5432

The same rule applies for the slit towards the bottom third of the bag. I can use the slit I had created to hold my mascara and eyeliner but be able to access them from the outside. The next few images demonstrate the versatility of the cuts better than how I’m describing them.

dsc_5433dsc_5435

Here is what the bag looks like when it’s hanging up and being utilized. You can see that my EcoTools, Bamboo Smudge Eyeliner Brush is inserted through the opening I had created (towards the top of the bag) and that my angled blush brush is actually on the inside of the bag. I use my Eyeliner brush more than my angled brush so this is why I keep it on the outside, for easy access. On the opposite side of the bag, you can see my small eyeliner and mascara sticking out from the small opening I had created towards the bottom. I also use my mascara and eyeliner often so I like to have access to them easily.

dsc_5439dsc_5440

DSC_5652DSC_5654

When I travel or move around with my makeup brushes, I can easily tuck everything inside the bag and nothing with get caught during transportation. I actually do have a bag for my toiletries when I travel and this brush holder goes into that bag as well.  The last image shows what the brush holder looks like once everything is tucked inside the entire bag. I know that this bag with eventually fall apart and I will end up adding it to my trash pile, but as long as I don’t stretch the plastic by putting too many items into this holder, it might hold up well.

This is a simple and interesting design manipulation of what we receive along with products we buy and how to re-design them to accommodate to our own needs.  I really like this design manipulation because I tend to hang things a lot and I didn’t have to throw any packaging away.  I hang things a lot because I like to keep my surfaces clean. Maybe this design might accommodate you somehow, I hope it will.

Essential Design Tools

03.28.2016

0900

DSC_3860

When I mention my essential design tools, I’m talking about tools I keep around in order to hack an object or product. Whether it be the way that the product is used, is placed in a location or creating more than one type of use for it. These alterations are never designed to compromise the integrity of the product itself unless I really want to step into that realm. The reason why I don’t want to alter the integrity of the products too much is because by living a zero waste life, I must be able to make multiple products be able to be used for multiple functions. This idea of versatility with every product I invest in, is always in the back of my mind with every purchase or design hack.

Supplies I keep in order to fix or hack day to day situations and circumstances around the house:

  1. Shoelaces and Rope
  2. S-Hooks
  3. Metal Binder Clips
  4. Velcro straps
  5. Carabiners
  6. Metal Rings

All of the tools I choose to keep are reusable and are made of durable material. I do prefer metal or stainless steel material because these tools can be manipulated into the shape of a loop. My favorite tools out of all of these are the carabiners and metal rings. Carabiners are strong, safe, secure and easy to use. Their closed loop design and locking mechanism was the design feature that caught my attention years ago. And due to the fact that these carabiners can be used repeatedly, the investment will pay off on its own. Metal rings can be used anywhere to create another secure loop for hooking any carabiner to it. These two tools coincide with one another when I use them.

I also favor rope as well. If you can find extra rope that’s braided together, then you’ve found gold in my opinion. The strength of braided rope combined with the knowledge of knots is essential. Also, rope has a soft flexibility to it where it can be use with clothing alterations, products and repairs. It’s flexible enough to create tension for a blanket fort, yet can be turned into a lasso to help save a drowning adult in a roaring rapid.

Metal binder clips and velcro straps are used as temporary grips for a group of anything that need to be bundled together. Although metal binder clips are limited in the width of the object they’re gripping, the metal material is still strong enough to retain it’s own shape.  Velcro straps can be used for larger bundles and can also be linked together to extend their capabilities around larger bundles.

S-Hooks are simply used when I need to hang something up without needing to drill a hole into another material. It is my go to tool when I have to deal with an object that needs support due to gravity more so than any other issue.

There are parameters to living a zero waste life, but one has to live within those parameters and still meet their own needs. Some might say that keeping supplies such as  the ones I’ve listed above is excessive, yet, I reuse these design tools repeatedly. If you notice that you constantly reuse certain tools or constantly go out and buy the same supplies, I’m betting that you’ve stumbled upon your own design tools. Invest in supplies that are versatile and are produced with durable materials, and they will consistently give back to you.