- 3-4 Cotton Handkerchiefs, pattern or color of your choice (Note: if you tend to use makeup/liquids that are oil or wax based, the substance will leave a slight film on the fabric, over time)
- Sewing machine
- Sewing Kit
- Ironing Mat/Board
When I started eliminating single use products out of my life, I really had no need to replace all of the products with reusable ones. But as we all know, life changes, and we adapt to it. Years ago, I had used single use, cotton rounds to remove makeup and nail polish. When I transitioned to a minimalist zero waste lifestyle, I eliminated nail polish from my life and only used vegan makeup. My vegan makeup removal process does not require cotton pads to remove the makeup, just soap and water.
Recently, I was gifted a facial skin care kit and I had no cotton pads to use with it. So now, in order to use the gift, I needed to prepare beforehand, and sew a pack of reusable facial cotton pads.
So for this project, I took a shortcut in which, I used a few handkerchiefs I already had. I knew I only needed rectangular cotton pads about 2″ x 1″, just wide enough to hold across my three fingers when using them.
I know that the makeup industry standard is to use “cotton rounds”, but when I broke down the division of my handkerchiefs, it was easier to make cotton ‘rectangles’ instead. I took each handkerchief and divided it in half, then divided those pieces in half, and then divided those pieces in half, until I broke down my handkerchief into small squares, about 2″x 2″. These squares will be folded in half and sewed into rectangles. This way, the cotton pads with have two fabric layers.
Technically, the final size of the cotton pads is up to you, because if you end up with a larger square, that only means you get to use a larger rectangle surface to use on a day to day basis.
So I took one of my handkerchiefs and folded it in half and cut it. I then folded the rectangles in half, which resulted in large squares. I folded the large squares in half and then folded those rectangles in half to create the small squares.
Using my iron and ironing mat, I folded each small square in half, to create the crease for the cotton pads. This crease is where the rectangle shape starts to form, and to save time, I would iron the pieces four at a time.
In order for me to iron four cotton pads at the same time, I placed four cotton rectangles in a square formation, in which the edges were placed inward and then I would iron the creases across the mat.
I used my sewing machine to sew the open edges together and I chose to use the zigzag stitch and a universal needle for this project.
The most common use of a zigzag stitch is to enclose raw edges as a seam finish. As a seam finish, one edge of the stitch is sewn off the edge of the fabric so that the threads of the fabric are enclosed within the threads of the zigzag stitch and the fabric is unable to fray because of the zigzag stitch.
Be sure to sew in from the edge slightly. Then, trim away the excess beyond the zigzag, making sure not to clip into any of the stitching. You can also use two rows of zigzag for extra “fray-stopping” power.
I started my sew line from one open end of the fabric, and continued around the open edges.
I like to tie off my thread ends, but you can reverse the stitch so that it your sewing machine creates a back stitch. In other words, while you’re sewing the last leg of the fabric edge, slow down the speed of the stitch by backing off of the pedal. Slow to a speed in which you can spot each needle point going into your fabric. If you can learn to anticipate where the needle will land, then you’ll be able to get as close to the end of your sew path and create a tighter back stitch for your projects. So, as you get closer to the end of your sew path, press the Back Stitch Lever, and hold it down, so that the direction will reverse. When you’re satisfied with the length of the back stitch, let go, and the machine should continue to push your fabric back to the original direction. (Try to get as close as possible to the end of the sew path before reversing the stitch.)
Personally, I would only reverse the direction for about half an inch. Don’t go back too far, since this is such a small piece of fabric. This back stitch will lock in your stitch. Then simply trim the thread, and you’re done.
I brought home an empty coffee creamer container from work, since I liked the shape. I knew that this project was coming up, so I thought it would be a good container for my reusable facial cotton pads.
So there it is, this is how I created my reusable facial cotton pads. I hope that this post may inspire you to eliminate single use personal care accessories in your bathroom.