Upcycled Coat Rack From Spoons

January 9, 2018August 12, 2018 / Yen-Van Tran / 1 Comment

01.09.2018

0600

Materials:

Wood board (18 inches long x 5 inches wide 1-1/2 inches deep)
Four 3 inch wood screws
Ten 1-1/2 inch wood screws
5 Spoons

Tools:

Power Drill
Power Screwdriver
Needle Nose Pliers
Slip Joint Pliers
Safety glasses
Gloves

So I wanted to make a coat hanger but I didn’t want to buy one. Apparently I had materials at home to make one of my own. This project is a fairly easy DIY for any of you who are curious.

My board was 18 inches wide and I wanted a minimum of 1 inch on each side, for margins. This left me with 16″ to work with. So initially I wanted to use 7 spoons for the hangers, but after I measured the distance, I decided to only use 5 spoons.

I divided the board up into three sections. The height of my board was 5-1/2″, but if you don’t want to use numbers, simply take a piece of paper and fold it into thirds. Then with a pencil, mark the first line and then the second. I wanted to offset my rows of spoons so the red line is for the top row of spoons and the green line is for the center of the bottom row of spoons.

Where the red line and margins intersect is where I drilled my top mounting holes. My bottom mounting holes is where the green line and the margins intersect. These holes are marked by the yellow circles in the image.

For the spoons, I wanted to drill 2 holes to mount each spoon and I knew I had to create hooks by manipulating the spoons. I picked out a drill bit that was a similar size diameter of my screws I was going to use on the spoons. Usually I choose a drill bit smaller than my screw, but that working with wood only. When working with metal, you want a drill bit that the same size as the screw since metal won’t give. Also, if you don’t choose a drill bit smaller than your screw, there’s a good chance you’ll strip the screw’s threads as you drill.

The green line marks the point of where I wanted my spoons to bend upwards, so they could be used as hooks.

When I drilled the holes, I wore gloves and my safety glasses because the metal slivers would fly off of the power drill. I applied slow but steady pressure while holding the spoon still and then I dumped the metal shavings into one side of my purple container. I did this to contain the shavings but also because it would be easier to discard them after I finished.

I first started bending the spoons by using the edge of my step ladder, then I used my Slip Joint Pliers to hold the spoon while using the Needle Nose Pliers to bend the spoons into hooks.

Once all of the spoons had holes drilled into them, I spaced the spons apart from each other in three inch increments. I proceed to attach the spoons to the board. For the wall mount attachment holes, I sunk the holes into the wood so that there was a slight design detail. I initial had made 2 drill holes so that I could mount it to the stud in the wall (those are the extra holes you see floating on the left half of the board), but I changed my mind and decided to directly attach it to the drywall instead. Because I was planning to use three inch screws, I knew that mounting it to the drywall wouldn’t be a problem.

But because I changed my mind on which drill holes I wanted to use to mount the coat rack, I now had two random holes that looked out of place. To fix this, I mirrored the holes to the other side of the board and then filled in the extra holes will extra wood filler we had left over.

I centered my coat rack and attached it to my wall. As you can see, the mistake holes look like design elements with the wood filler.

So there it is, my coat rack made from spoons. These spoons are a few extra spare spoons from my mother’s kitchen and I really like that I was able to upcycle these extra spoons, knowing that a part of her kitchen was now used in an item I really needed. It’s a nice homage to my mom in a subtle way.

Our homes and possessions hold a great deal of different types of materials in which we can reuse and upcycle into new items. Once you breakdown how different types of materials are used, the possibilities are endless. Scan your home and surroundings, I’m sure you’ll find a lot of resources.

Use What You Have

December 20, 2016August 12, 2018 / Yen-Van Tran / Leave a comment

12.20.2016

0800

“Why I don’t recommend a lot of separate items…”

You’re looking at everything I own in my kitchen. That’s all of it, although my silverware and kitchen tools aren’t pictured. Some kitchen items are marketed to have specific uses, but you’d be surprised at how many kitchen items can have multiple uses and how some kitchen tools really aren’t necessary at all. Even when it coms to bathroom items, I don’t have a separate soap for my body and my face (I use separate bars… but it’s still the same bar soap brand). I use baking soda as toothpaste and I don’t use band aids (I use paper tape with gauze).

For those of you who are moving into this lifestyle, I understand the need to buy compostable cotton swabs or a bamboo set of utensils to carry around, instead of grabbing a set from your existing silverware. In order to transition to this zero waste lifestyle, you’re altering your behavior that you’d developed for however many years you’ve existed on Earth.

However, I don’t recommend buying into the “buy all new things because nothing else can substitute it” mantra. The likelihood is that you already have items that you can use, but for different purposes and the transition is simply altering your behavior and mindset. I understand the novelty behind this zero waste movement, but a lot of the times, I’ve noticed that a few bloggers will recommend a lot of new items. Part of this movement is to try to NOT create waste and when you buy more stuff, more than likely you’re producing some form of waste.

For kids, I understand that it make take a few colors and some ownership of their personal products so they can personally take part in this movement or to break away from what they already like and know. Also, a lot of glass and stainless steel items may be to heavy for them to carry around, or that they may not be careful enough to take care of such items. For adults however, I think we should really try to create as many uses for a single product, as much as possible. Products that are designed for a specific use and a certain function, will likely not be as versatile for any other use.

Here are some of the items you don’t necessarily have to buy:

Handkerchief –> Use existing fabric napkin or you can make your own from old pillowcases (just try to make sure the material is 100% cotton)
Cloth napkin in your “To Go Lunch Kit” –> Use existing fabric napkin
Silverware in your “To Go Lunch Kit”–> Use existing silverware (unless you’re going to pass through TSA [Transportation Security Administration] at the airport or some kind of security metal detector, then carry around a set of bamboo utensils)
Eco lunchbox –> Use existing Tupperware
Placemats –> Make your own from old bed sheets or pillowcases (Just remember to layer them up so it’s a thicker pile)
Re-useable Produce Bags –> Make our own re-useable produce bags from old bed sheets and pillow cases (just make sure it’s cotton, with a decent thread count so it won’t fall apart as easily.)
Spice Jars –> Just re-use the space jars you already own (remember to tare the weight before you refill it up. I usually carve the weight into the lid so I never forget)

This list could go on and on, but I’m keeping in mind that each person has a different journey on this path of zero waste. But if you can, reuse what you already own, there’s no point to wasting your money if it’s not necessary. Also, the more stuff you buy and if you’re not purging items in your home, you’re essentially just adding to the amount of possessions you’ll now be responsible for. So don’t give yourself more work, seriously… life will do that down the line… apparently it’s plentiful.. like pens.. stupid free pens.

Work Desk Essentials

May 2, 2016August 12, 2018 / Yen-Van Tran / 1 Comment

05.02.2016

0830

I keep a small desk essentials kit at my work desk so that I don’t have to carry items back and forth from home constantly. I keep some loose leaf green tea along with a tea infuser, and some dry snacks. At my job there is a kitchen with a microwave, an electric kettle ready for employees, so I base my small kit on the available resources. In my bag which I do carry back and forth from home, I keep a stainless steel travel mug, and a set of utensils along with a fabric napkin. The reason why I keep my utensils and coffee in my bag is due to the fact that I like to be ready to go out to eat when the opportunity arises. I also will use my coffee mug for coffee, teas and water as well.

The variable items that I tend to carry is my stainless steel water bottle, whatever lunch I’ve packed for the day, and my “to go” breakfast which is usually oatmeal in a small mason jar. Depending on the days schedule or how much time I have before I step out of the front door I may or may not carry along the variable items.