Sofa Armrest Organizer

October 14, 2019October 14, 2019 / Yen-Van Tran / Leave a comment

10.14.19

0600

Materials:

Two Curtains at 5′-10″ in length

Tools:

Sewing Machine
Sewing Kit

I have an extra set of curtains, which I didn’t want to use anymore. I decided to create a sofa armrest organizer with both curtain pieces. Both curtain pieces were 5 foot 10 in length, and 27 inches wide.

I wanted my sofa armrest organizer to sit at a certain height off the ground, but I also wanted the top half to also tuck underneath the couch cushion. I first measured how high off the ground I wanted my couch armrest organizer. Since I needed to hang it over the sofa armrest and then wrap back over the arm to tuck underneath the cushion, that left about 47 inches to tuck underneath the cushion.

I wanted to store books in the first organizer, which would be fairly heavy, so I needed a lot of the material to tuck under the seat cushion to hold it in place. I actually wanted the top part of the organizer to tuck underneath an entire sofa cushion width, due to the weight that would be applied.

FIRST SOFA ARMREST ORGANIZER:

When I measured out my first design, I wanted the pockets for my books to be 14 inches in height. I first hemmed all of the edges and then I folded one edge to create the 14″ tall pockets. I sewed around the edge of the folded piece (yellow arrows) and then divided the pocket in half, and sewed a dividing line down the center to create two tall pockets (red arrow). These pockets will be able to hold my books and paperwork that I’m currently working on. I wanted my pockets to be a bit taller than the standard paper size (8.5″ x 11″), due to the fact that I knew the width of the pocket might eat up some of the height. I also wanted to be able to hide my books and paperwork, so my pockets wouldn’t look like they were overflowing with paper.

To attach the sofa armrest organizer, I removed the couch cushion on the side of the couch, located how high I wanted to hang the organizer, and then replaced the couch cushion. Since the top half of the fabric organizer is tucked under the couch cushion, it stayed in place.

SECOND SOFA ARMREST ORGANIZER:

I also wanted to create a second design, which would have smaller pockets for smaller items. My second design would have 10 inches in height for the books, and 6 inches for smaller objects.

Using the same sewing method as the first design, I hemmed all of the edges of the fabric material, and then measured 16″ of material at one end. I folded up the 16″ material, sewed along the outside edges of the tall pocket (yellow arrows), which created a giant 16″ tall pocket.

I then took the bottom 6″ of the pocket and folded it up, to create a shorter 6″ pocket at the bottom. This 6″ tall pocket also helped create the 10″ pocket behind the smaller pockets. I then sewed on both of the side edges of the fabric piece (red arrows) and then sewed a dividing line (blue arrow) to create a total of four pockets for this design. I sewed the edges of this design, all the way to the top of the pocket to reinforce the side edges.

Using the same method as the first sofa armrest organizer, I located where I wanted the organizer to hang on my armrest and I tucked the top half of it under the couch cushion on the end.

Since these sofa armchair organizers are made of fabric material, I can toss them into the washing machine and wash them easily. I can also fold them up and put them away if I don’t need to use them. Fabric is my favorite material to work with since it can be taken apart and reused multiple times. I love that it is a very flexible medium and I was able to put my old curtains to good use.

Upcycling Denim Jeans

January 30, 2018August 13, 2018 / Yen-Van Tran / 5 Comments

01.30.2018

0600

Materials:

One pair of denim jeans

Tools:

Sewing machine
Sewing Kit

So recently I started going auditing my traveling items such as my bath bag, travel accessories as well as my sport bags. I wanted to find 3 pieces of clothing to donate, but I also noticed that my bath bag wasn’t containing my bath items comfortably.

So I had the choice to go buy/find a new bath bag or find another solution. Out of the items I decided to donate, I found a tank top, sweater and a pair of jeans. Denim is one of my favorite materials to work with. I love upcycling denim into new items. The idea of donating the pair of jeans wasn’t exactly what I thought I would do, so I decided to make a stand up bath bag for myself, or at least a few stand up bags.

I’ve owned bath bags before, but the material was with a polyester or nylon blend. Over time, my bath bags would have soap or toothpaste residue stains. I figured that with a denim bath bag, I could simply throw it into the washing machine and it would clean easily.

I divided each leg in half by folding it in half. I then cut the legs off from the pair of jeans and then divided each piece in half.

I turned each of them inside out and designated the wider end of the pieces as the bottom of the bag and the smaller ends as the top of the bag. I folded the top of the bags down to create the drawstring tube. This is where I wanted to install the drawstring later.

DSC_8697 - Copy

I hemmed the bottoms of the bags by simply sewing a sew line across the bottom. I then sewed the drawstring tube. I measured 2″x2″ squares on the corners on bottom.

I marked these white dots on BOTH SIDES OF THE BAG, near the bottom section of the bag. These white dots will be used as guides of where you will sew in the next step.

DSC_8699 - Copy

I then flipped the bag upside down, and so that the right side seam was facing up. I then folded the bottom of the bag to create a diamond shape. You should be able to locate all four dots that were created in the last step, when molding the diamond shape.

DSC_8704 - Copy

The dots are guides to sew where you will sew horizontally across the diamond. After sewing the two lines, the diamond should look like this.

Since I was initially thinking of making a new bath bag, I wanted to sew a small pocket inside of that bag. I had this extra pocket left over from my Handmade Handkerchiefs project, so I added it on the inside. To find the opposing edges of the box, you can locate it by finding the perpendicular lines of the top and bottom hemmed lines.

DSC_8715 - Copy

If you want to make a small pocket inside, you can sew a piece of material to the inside of the bag, as long as you leave to top of the material open.

In this case, because the pocket was more than half of the height of the bag, I placed the pocket towards the bottom of the bag. I also knew that I would be folding the bag down when in use, so placing it towards the bottom gave me room for the top to be folded down.

Once I pulled the drawstrings through the bags, this is what they looked like. They stand up pretty well, and I can fold them down to create a top frame for the boxes.

This is what my bath bag looks like now.

I like the fact that I can simply fold my bag down and be able to access everything I need inside. I also have the habit of attaching a ring to the interior of any bag. So I attached a metal ring to the inside seam of the bag, because I wanted to hang small bath items for easy access.

So there you have it. This was my solution to my travel bath bag issue. I genuinely love denim and to make these stand up drawstring bags with this material is one of my favorite kinds of sewing projects that I like to get involved in.

I used my other bags for some camera gear and for another bag I use for traveling. The denim creates a nice thickness for the bottom of these bags, which is why I like to use them for electronics.

As a bonus…

I made a bag out of the top part of my denim jeans. I simply flipped the top inside out and hemmed the pant leg openings. Due to the nature of how the jeans were cut and sewed, I folded the outer edges of the jeans inward when I hemmed them.

I then sewed a zipper to the top opening of the jeans using sewing pins to hold the zipper in place and then sewing it to my pants. I used the same sewing steps to attach the zipper as to when I Created Slim Hanging Organizers.

Since my zipper wasn’t quite long enough for the length of the jeans, I closed off the jeans by sewing the top together.

I used an extra tie to create the handles of this bag. This was a simple choice but some people may prefer to use a belt or something more to their taste. I chose the tie because I wanted to be able to throw everything into the washing machine.

And as always, I attached a metal ring to my zipper for a slightly easier access.

I use this bag to hold some smaller items that need a bit of cushion like camera gear or smaller electronics.

Creating Fabric Boxes

January 16, 2018August 12, 2018 / Yen-Van Tran / 8 Comments

01.16.2018

0600

Materials:

Hanging Fabric Shelf Organizer
Quilt Batting (optional)

Tools:

Sewing Machine or thread and needle
Sewing Kit
Ruler
Pencil
Iron and Ironing Mat

So I had a hanging fabric shelf organizer which I had replaced by sewing slim hanging organizers from pillow cases. You can find that blog post at Created Slim Hanging Organizers. But once I replaced the canvas hanging organizer, I didn’t know what to do with it. So I decided to create small fabric boxes with the leftover material. I first took it apart, literally took it apart piece by piece. I recycled the cardboard and I was left with rectangular pieces of canvas.

This project works best if you have perfect square material, but I didn’t want to waste any material so my pieces were left as rectangular pieces. Rectangular canvas pieces yield rectangular shaped boxes. Square fabric pieces will result in perfect square boxes.

So I first worked on the larger fabric piece. I first sewed the edges of the fabric so it wouldn’t com apart. I wanted these boxes to have a rougher look to them so I didn’t hem the edges. You can insert a fitted quilt batting piece in between your fabric pieces if you are using a softer fabric and if you want your box sides to be a stiff frame. I didn’t use batting because my material is canvas in this project.

I folded it in half (doesn’t matter which direction), and then I marked off a 3 inch by 3 inch triangle on each corner of the folded side. These triangle marks are the red lines in the photo. The larger the triangle, the higher the height of the fabric box will stand.

I opened it up and I folded the fabric piece in the perpendicular direction, with the first set of triangle marks still facing upwards.

I then proceeded to fold the fabric and mark off the second set of 3 inch by 3 inch triangle on each corner of the folded side. These are located with the blue lines in the photo.

From there, I sewed over the lines of where I had marked each set of triangles. I sewed the blue lines first. I then opened up the fabric piece, lined up the other corners in order to sew over the red lines.

Once you sew all of the four corners, when you open the fabric, it should look something like this. However, now you have to flip the box inside-out. Once you do that, the rectangular tabs you created should be on the inside.

With the four triangle flaps sticking straight up, fold them down to create a straight edge of the box. You can pin it down with sewing pins to watch the shape take form. Once you fold down all of the standing flaps, you should have a similar box like the photo below.

Now you just need to sew the standing flaps down to create sharper straight edges of the box and then sew the flaps on the inside of the box to keep them flat against the sides.

I’ve used the large fabric boxes to organize items in my linen closet as well as my camera gear items. Although these aren’t perfect squares, I like the idea that these fabric boxes are easily modified to most objects.

For the smaller piece of fabric, I hemmed the edges to keep the fabric together and then I measured a 2 inch margin all around the edges. Here, you can insert a piece of fitted quilt batting before sewing the edges together, to give your fabric box a more framed look.

I folded each edge over and ironed the lines to define the bottom of the box.

Using sewing pins, I folded in each corner and held them there. These smaller triangles will help define the corners of the box.

For each triangle corner, I found the center of the triangle and folded it in half. Once the triangle folded in half, the edges of the box came together naturally. I hand sewed these edges together by using a running stitch pattern. I sewed the running stitch in one direction, then simple went back the opposite direction to fill in the gaps in the pattern.

Once I sewed all four corners, I proceeded to sew the triangle flaps on the inside of the box to the walls.

I’ve used the smaller fabric boxes to keep smaller items organized that sit on shelves and table tops. So there you have it, these were very simple boxes made from the canvas material I had left over from the hanging fabric shelf organizer. You can use pretty much any fabric you want, but you may need to use quilt batting to strengthen the sides of the boxes.

Beach Clean Up Day

July 11, 2017August 12, 2018 / Yen-Van Tran / Leave a comment

07.11.2017

0600

Whenever I go and do a beach cleanup, it’s never really a formal event. I use large fabric bags that I had sewed awhile back and I gather what I can. I use old running gloves to pick up the items because I don’t own a pair of rubber gloves anymore. I can easily also toss these gloves into the laundry when I’m done. With fabric gloves, I’m still very cautious about what I pick up and how I pick items up.

Most of the time, I’ll find anything and everything discarded on the beach. I usually walk along the shoreline and carefully look through the seaweed and debris that gets washed up from the ocean. A lot of ocean trash gets tangled up in the seaweed which then gets washed up on the beach.

I went to Roosevelt Beach this time for the beach clean up, and this beach looks fairly clean overall, but when you slow down and walk slowly, you can see little bits and pieces of trash everywhere like this:

On the surface the beach looks clean, but once I examined and shoreline and walked further and further, I kept finding more and more trash. At one point, it felt overwhelming because I knew I probably missed a bunch of pieces of trash due to the angle I was standing at or maybe my eyes simply couldn’t see the trash clearly. The reason why I like to do beach cleanups is because of the amount of trash that now occupies our ocean. There are different garbage patches that exist in five different ocean gyres in the world. With the ocean currents and the trash that’s discarded into the ocean, the combination creates different garbage patches which subsequently, kills the ocean wildlife. Since I live alone the Pacific Coast, the Pacific Ocean Garbage Patch is the closest garbage patch to me.

Here are the basic facts about the Pacific Ocean Garbage Patch;

7 million tons of weight
Twice the size of Texas
Up to 9 feet deep
In the Great Pacific Ocean Gyre there is 6 times more plastic than plankton, which the main food for many ocean animals
By estimation 80% of the plastic originates from land; floating in rivers to the ocean or blew by the wind into the ocean
The remaining 20% of the plastic originates from oil platforms and ships
According scientist it is the largest plastic dump on earth; so plastic patches are larger than waste dumps on land
Trash patches consist for 80 percent out of plastic
Scientific research from the Scrips Institution of Oceanography in California U.S. shows that 5 to 10% of the fish contain small pieces of plastic.

There are many reasons why I choose to live a zero waste life, or at least as close as I can to a completely zero waste life. Knowing that the trash we discard into the ocean is killing wildlife weighs on me. Although there are many concerns in the world that I do care about, this one hits close to home. We did this. Humans did this and are still doing this to wildlife.

There’s a program called Take 3 For the Sea, where they encourage that when you visit any location and pick up at least 3 pieces of trash, you too can help with reducing the amount of trash floating out in wildlife. This non-profit organization delivers education programs to inspire our global community to help create a cleaner planet for wildlife and future generations. You can pick up 3 pieces of trash wherever you go and that would make an impact on the environment.

I encourage you to do this. Please help clean up your local beaches. You can even download the app by Ocean Conservancy called Clean Swell. It’s a global movement to keep beaches, waterways and the ocean trash free. Head out to your favorite beach and use the app to easily record each item of trash you collect. Then share your effort with family and friends.

You can also find local beach clean up organizations near you. I have been a member of the Surfrider Foundation and they hold monthly beach clean ups.

Make-Up Brush Bag Hack

May 9, 2017August 14, 2018 / Yen-Van Tran / Leave a comment

05.09.2017

0700

Materials:

Plastic store bought brush bag

Tools:

Razor Blade or scissors (Please be careful when using the razor blade)

So I bought an e.l.f. Angled Blush Brush from Target back in 2016 and it came in a clear plastic bag such as the ones in the pictured below. I didn’t want to add it to my trash collection, so I set out on trying to figure out how to convert it into a product that would be useful in mylife.

I knew I wanted to create a holder for all of my brushes (luckily I only use two types of brushes) So I came up with this design to hold my vertical make up tools, such as my mascara, eyeliner pencil, angled blush brush and my EcoTools, Bamboo Smudge Eyeliner Brush.

I sewed the flap that covered the holder to the bag itself. I did this because, I didn’t want to remove the flap to access a clean opening but to also reinforce the bottom of the holder. (At this point I had decided to hang this object as a vertical brush holder).

I opened the other end of the holder by cutting a small slit across the top side of the bag and hold punched a hole on the opposite side. I only put one hole punch on one side because I would be using that side to hang the bag and I didn’t want anything blocking the opening of the bag. Lets call the hole punch end the “Top” and the sewed end of the bag, the “Bottom”. (you kinda have to picture this bag vertically hanging like that)

I used a permanent marker to show you where I placed my cuts on each side of the bag. On the same side as the hold punched hole, I sliced a longer slit on the bottom third of the bag. On the opposite side of the bag, I sliced a shorter cut closer to the top. These cuts do not cut through both walls, please keep that in mind. This design will only work if both walls of the holder are not cut at the same spot.

For the taller brushes, I am able to insert both of my brushes through the opening at the top, however, I can also slide the brush I tend to use through the slit towards the top.

The same rule applies for the slit towards the bottom third of the bag. I can use the slit I had created to hold my mascara and eyeliner but be able to access them from the outside. The next few images demonstrate the versatility of the cuts better than how I’m describing them.

Here is what the bag looks like when it’s hanging up and being utilized. You can see that my EcoTools, Bamboo Smudge Eyeliner Brush is inserted through the opening I had created (towards the top of the bag) and that my angled blush brush is actually on the inside of the bag. I use my Eyeliner brush more than my angled brush so this is why I keep it on the outside, for easy access. On the opposite side of the bag, you can see my small eyeliner and mascara sticking out from the small opening I had created towards the bottom. I also use my mascara and eyeliner often so I like to have access to them easily.

When I travel or move around with my makeup brushes, I can easily tuck everything inside the bag and nothing with get caught during transportation. I actually do have a bag for my toiletries when I travel and this brush holder goes into that bag as well. The last image shows what the brush holder looks like once everything is tucked inside the entire bag. I know that this bag with eventually fall apart and I will end up adding it to my trash pile, but as long as I don’t stretch the plastic by putting too many items into this holder, it might hold up well.

This is a simple and interesting design manipulation of what we receive along with products we buy and how to re-design them to accommodate to our own needs. I really like this design manipulation because I tend to hang things a lot and I didn’t have to throw any packaging away. I hang things a lot because I like to keep my surfaces clean. Maybe this design might accommodate you somehow, I hope it will.

Ethylene Producing Fruits And Vegetables

April 4, 2017August 12, 2018 / Yen-Van Tran / 3 Comments

04.04.2017

0700

Storing fruits and vegetables can be tricky if you have too much and if they’re stored incorrectly, the speed of ripening can speed up unnecessarily. It’s one lesson I had to take time out to understand when I lived on my own.

As some fruits and vegetables ripen, they release ethylene, a gas that can cause other produce to become spotted, soft, or mealy. To prevent this, keep ethylene-sensitive fruits and vegetables separate from varieties that emit the gas.

A Few General Guidelines

Do Not Store Fruits and Vegetables Together. Fruits that give off high levels of ethylene (the ripening agent) can prematurely ripen and spoil surrounding vegetables. (Think of the “one bad apple” adage.)
For Vegetables: Before storing, remove ties and rubber bands and trim any leafy ends. Leave an inch to keep the vegetable from drying out. Make sure the bag you store the veggies in has some holes punctured to allow for good air flow. Pack vegetables loosely in the refrigerator. The closer they are, the quicker they will rot. Leafy greens can be washed before storing by soaking them in a sink full of water, while soft herbs and mushrooms should not be washed until right before they are used.
For Fruits: Non-cherry stone fruits, avocados, tomatoes, mangoes, melons, apples, and pears will continue to ripen if left sitting out on a countertop, while items like bell peppers, grapes, all citrus, and berries will only deteriorate and should be refrigerated. Bananas in particular ripen very quickly, and will also speed the ripening of any nearby fruits.

Ethylene Producing Fruits

•Apricots
•Avocados
•Bananas
•Cantaloupes
•Honeydew melons
•Kiwis
•Mangoes
•Nectarines
•Papayas
•Peaches
•Pears
•Plums
•Tomatoes

Ethylene Sensitive Fruits:

•Apples
•Asparagus
•Broccoli
•Carrots
•Cucumbers
•Eggplants
•Green beans
•Lettuce and other greens
•Potatoes
•Summer squash
•Watermelons

Try to keep the ethylene producing fruits separated from one another and make sure the ethylene sensitive fruits are kept in a separate section too. You can find storage tips and a more extensive list of how to store vegetables and fruits without plastic from Washington’s Green Grocer. The list originated from the Berkley Farmer’s Market, and you can download their PDF of How To: Store Fruits and Vegetables and keep it for reference. There are still many different methods of storing fruits and vegetables, depending on how and if you prepare them before storing. I think this is a very helpful reference for those wondering how to go about eliminating it from fruit and vegetable storage.

Zero Waste Take Out Food

March 28, 2017August 12, 2018 / Yen-Van Tran / 2 Comments

03.28.2017

0700

Ordering take out food is the one thing I didn’t want to give up when I started living a zero waste lifestyle. The concept of always going out to eat when I didn’t want to cook, seemed viable when I first started this journey. Of course, going home, not wanting to cook and finding the energy to go out to eat was also another challenge. So, after some investigating, and research I had to put together a “Food Take Out Kit”. Most of my research was simply through trial and error with this kit, and finding restaurants willing to serve food in my dishes. I’m lucky that I live in a city that is trying to be more environmentally friendly so I did find a lot of restaurants willing to serve my take out food in my own dishes.

I first called a lot of the restaurants in my downtown area, to see if they were willing to participate in my zero waste effort. A lot of the restaurants were more than willing to participate, but with different methods. Some were willing to take my dishes to the kitchen where they would directly serve my dishes right into my containers, and some were more adamant about bringing the food out on one of their own plates and then transfer it into mine, so to not contaminate their kitchen. Either way, it was fine with me. However, during my research, I did come across some restaurants that were not willing to do either method.

I furthered my research by ordering take out from as many restaurants as I could, when I could. It takes a bit of trial and error, but if you have a Food Take Out Kit, I think it make these trips much smoother. The one thing that seemed a bit tricky was the different types and sizes of side dishes these restaurants offered. Also, I had to slowly gauge what sauces or dips would come along with certain dishes. I didn’t really know what sized to go container each restaurant used, so I used large glass tupperware in hopes that the volume of my tupperware would suffice.

I usually go to the prospective restaurant and order my food with the hostess right then and there, so that I can hand them my glass tupperware dishes to fill up. I had to make a couple of trips to really get this kit down correctly, but here it goes. In my Food Takeout Food Kit, I have:

Food Take Out Kit:

Containers:
1. Three 54 oz. containers (for main dishes)
2. Three 35 oz. containers (for smaller portion dishes and side dishes)
3. Four 1 cup containers (for sauces)
Reusable cloth produce bags
1. Three medium sized bags
2. One large bag

I use tupperware by Kinetic GoGREEN Glassworks Series 6-Piece Rectangular Oven Safe Glass Food Storage Container Set 54-Ounce Each for my larger dishes, as well as Kinetic GoGREEN Glassworks Series 6 Piece Square Oven Safe Glass Food Storage Container Set 35-Ounce Each for my smaller dishes, side sides or appetizers. I use Pyrex Simply Store 1-Cup Round Glass Food Storage Dish for sauces or dips that the dishes might come with.

I also will bring my dishes to my local grocery stores, to their deli counter to fill up on whatever I need to. It’s also easy to fill up on cheeses or meats at the deli counter with large rectangular dishes like these. It’s easier for the deli worker to tare the weight of your dish and to fit your choices easily as it’s also easy for them to move around the items to fit more snug.

The downfall of this system is that not every restaurant will allow you to use your own dishes so therefore you either have the choice of eating out at the restaurant or not at all. On the other hand, there is a way to bring that food home which you may have a good selection of restaurants willing to participate in it, and you’re not producing unnecessary trash. I don’t mind that certain restaurants opt out of this participation. They have every right to run their business as they please. However, I’d prefer to buy from restaurants willing to do this though.

If you want to try this Food Take Out Kit, you actually may already have tupperware at home that you could use. If not, I included links to the ones I use. To clear up any confusion, make sure to show the hostess that you already have the 1-cup containers for sauces and dips ready to be filled. I’ve noticed that their concerns are usually associated with the condiments that come with the dishes. The last bonus with creating a zero waste take out food system, is that if you’re not finished with the meals once you bring them home, just place the lids back on and you can save the food for later or eat it the next day. It’s such a simple clean up system!

Yes, I use two bags to carry these dishes around.

Yes, it gets heavy at times.

Yes, it’s worth it, knowing that I’m not contributing to more trash to the landfill.

Food And Bath Storage Containers

April 11, 2016August 12, 2018 / Yen-Van Tran / Leave a comment

04.11.2016

0800

When it comes to using reusable containers to buy or store food in, it became a challenge due to the fact that bulk foods come in a variety of textures and consistencies. After a few trials, I finally found what work and did not work and I came up with these solutions.

32 oz Ball Quart Jar, Wide Mouth:

I use these jars to store my liquids in, and when I say “liquid”, I’m talking about Dr. Bronner’s Peppermint liquid soap. Because those liquids are quite viscous, these jars are easy to fill and clean out when needed.

Ball mason Jars:

I use ’16 oz, Ball Canning Jars, Regular Mouth with Lids’ for bulk seasonings such as sea salt, peppercorn, flax seed, honey and almond butter. I also use these jars for my bulk bathroom products such as my face lotion and body lotion. These jars are great due to the fact that they’re designed to handle wet ingredients over time, and they can also be used for canning as well. You can read more about Ball and the history of the company and their products, click HERE.

I also fill up my mason jars with olive oil, balsamic vinegar and fresh almond butter. In the beginning of this journey when I first started buying bulk liquids, I noticed it was easier to just fill up the mason jars and then just put them away when I got home. I know it doesn’t “look” ideal, but to transfer the liquids into tall and skinny bottles like my Dr. Bronner’s Liquid Soap, is one extra step I prefer not to take.

I also love using Bormioli Rocco Fido Jars for containing my other bulk foods. I use the 1 Liter jars for bulk teas and a variety of snacks and the 1.5 Liter jars for larger supplies of bulk ingredients such as nuts, whole wheat flour, cane sugar, cranberries, mini peanut butter cups and other bulk snacks. I use the 2 Liter jars for dried beans, baking soda and coffee. For my largest bulk items such as brown rice and oatmeal, I use the 4 Liter jars. One of the websites I follow suggests to use these types of jars for wet ingredients, but I’ve noticed that the gasket that comes with these types of jars, absorbs odors and stains easily. If you prefer to stick to only one type of jar design, then I say go for it. However, odors are a nitpicky tick of mine. It just seems strange to me to open a jar almonds and smell lotion, or when you open the jar with cane sugar and you smell balsamic vinegar. By using the jars for dry ingredients, I can switch out my bulk supplies and not worry about leftover odor from a previous use.

When I first researched on different types of canning jars with hermetic seals, a few different brand names popped up such as Le Parfait, Kilner and Bormioli. The reason why I chose Bormioli was because of their design structure for their jars. Most of the jars I researched on are designed with a round base, which actually wastes space. Bormioli uses a square shape base which utilizes shelf space and will organize easily next to one another. Bormioli has a long history of creating quality glassware while using high quality materials. You can read more about their history here Bormioli Rocco USA.

I also use PYREX tupperware to contain items I find at the grocery store salad bar, but I also use these to store my lunches to bring to work. I did bring the 1 cup, 2 cup and 4 cup bowls to the grocery store to carve their tare weight into the lids, because I knew I would use them eventually. It did feel a little strange at first, lugging around glass tupperware, but using the PYREX bowls was essentially the same as using one of the grocery store disposable paper containers. I knew that my extra effort would count in a small way- in the long run. At the salad bar, I’ll fill up my PYREX bowls with olives from the olive bar, hummus, potato salad and anything else I feel like indulging in.

I really like PYREX because it’s made of tempered glass and it’s easy to clean, store and you can use these to cook in toaster ovens as well as larger ovens.

For my spices, it is a collection of many types of seasoning jars I’ve collected over time. I did buy a set of seasoning jars, and those are on the bottom row. I initially did this to test out how to go about recording the tare weight as well as how to fill them up. However, it did seem simpler to just reuse the rest of my seasoning jars. They do all have different tare weights and I carved each tare into each lid. I do suggest to use screw cap seasoning bottles as they are quite secure when closed correctly.

I hope this post clears up how I go about organizing and designating my bulk items per container. I honestly wished I had read about some type of reasoning and method before I started my journey because a few mistakes were made along my journey. However, now that I have figured out my system, I wanted to share it with you. So happy bulk shopping and I hope trips to the bulk sections are more efficient for you.