- 2 Bath Towels
- 4 Hand Towels
- Sewing Kit
- White Fabric Pencil
- Sewing Kit
- Sewing Machine
It’s interesting how we pick up habits from our parents or other figures in our lives. When the rain season comes, my mother has always wrapped an old towel across her car mats to absorb the extra water that would get dragged in by everyday use. To this day, I’ll see her break out the towels around the middle of October.
As for me, I never cared for my floor mats in my car. I honestly never liked my car. The car was bought without my input and I was stuck with it thereafter. But recently I did get new car mats, along with a new car, and since I didn’t want to drag a bunch of water into my car, I too, wrapped my car mats in towels. But I soon realized that the towels would get tugged and moved around from the daily use of them. I had to solve this issue. I didn’t want to constantly re-tuck the towels under my car mats, because sometimes they were already dirty and wet.
The front floor mats were a large size and I knew that bath towels would be a perfect fit. I decided to make some towel sleeves for my car mats. Since my carpet in my car is black, I knew I had to find black towels to create my towel sleeves. With the towels sleeves, it would be easier to catch the dirt and rocks that would be brought into my car, and the towels would be easy to clean, since all I had to do was take off the sleeves and throw them into the washing machine.
I found two bath towels that were 52″ long by 30″ wide. Since my front floor mats are about 31″ long and 21″ wide, I only needed the width of the floor mat sleeves to be about 22″ wide. the size of these bath towels would give me 26″ width. I didn’t mind if the towel wasn’t long enough to cover the length of my floor mat because the mat could stick out a little bit.
I folded the towel in half, length-wise and pinned the edges together, to prepare for the sewing process.
I wanted to leave one of the shorter edges open, so I could slide my floor mats in and out easily. In one continuous line, I sewed along the yellow arrows (in the picture below). For the corners of the towel, where the material was thicker, I angled the long sew line and continued on. I then went back and hand stitched the corners, so they would stay together better.
As you can see, the folded towel was still large enough to fit over my floor mat, and there was still extra room.
In order for the sleeves to fit to the car mats better, I sewed rough outlines of the shape of each mat on each of the sleeves. First, I flipped the car mats over, onto the back of the car sleeve. Then, using my white fabric pencil, I drew rough outlines of each mat. I did this because I didn’t want the white washable pencil to show, when I fit the sleeve over the car mat.
I only outlined the rough outline of the car mats, because I still needed to remove them easily. I created the outlines about 3/4″ from the actual edge of the car mats. I left a bit of a boarder, for the fact that the towel might shrink in the washing machine and also, I wanted the sleeves to slip off easily, when needed. Towards the closed end of the car sleeve, I tightened the outline a bit, but in general, I kept the outline lines straight in from the open edge.
I placed each of the front floor mats into my car, and folded the edges underneath the floor mats accordingly. You don’t have to fold them under, but I chose to.
For the rear seat floor mats, I found eight hand towels to create the set in my car. My rear seat floor mats are 24″ long, by 16″ wide, so I found hand towels that were 26″ long and 16″ wide. The sewing process for these floor mat sleeves follows the previous steps for the front seat floor mat sleeves.
I stacked two hand towels on top of each other, making sure that the tag was facing inwards for both towels. I then sewed along the yellow arrows around the towels. I left one of the long edges open because I wanted to slide the floor mat in easily. For the corners of the hand towel sleeves, I angled the long, linear sew line to complete the stitch, and then I went back to each corner and stitched them together carefully. My machine doesn’t like it when the material gets too thick, because it can’t pass under the needle easily.
These rear seat floor mats had a lot of extra room around the edges, so I knew that I might have extra floor coverage.
This size hand towel seems to accommodate different car brands and the mats still fit really well within the parameters.
Now, when I need to clean my floors, I’ll just remove the floor mats from the towel sleeves and either wash them or shake them out. I might have to vacuum the edges, but that doesn’t take long at all. These towel sleeves makes my life a bit easier, by allowing me to keep my floor mats clean, and that’s always a good perk.
3 thoughts on “Car Floor Mat Towel Sleeves”
I personally think these made my life easier. Sometimes when I just want to brush out the leaves and small dirt pieces I trek into the car, I’ll use a bristle brush (like this one), to brush out the sleeves quickly. https://www.amazon.com/ANNIE-Wave-Soft-Brush-Model/dp/B00KDL2YXM/ref=sr_1_128?crid=C4W4UF9RZL47&keywords=bristle%2Bhair%2Bbrush%2Bfor%2Bthick%2Bhair&qid=1638157165&refinements=p_36%3A1253950011&rnid=386662011&s=beauty&sprefix=bristle%2Bhair%2Bb%2Cbeauty%2C239&sr=1-128&th=1
might try this