Blogger Recognition Award

11.14.2017

0600

blogger-recognition-award-badge

 

I am very happy to announce that Design Life Hacks has been nominated for the Blogger Recognition Award! After many topics and posts that I’ve covered, I’m glad that I still can create interesting content. 😊

What is the Blogger Recognition Award?

Blogger Recognition Award is given to bloggers by bloggers to encourage and acknowledge the hard work and effort that goes into creating posts. It’s an opportunity for bloggers to recognize one another for each of our contributions. A big thanks to Emilia Cantero Dieguez from The Green Choice for the nomination!

How my blog started?

Living in the Bay Area in California, located in the United States of America, life can be pretty stressful. Nationally, a middle class yearly income for a household of three people is considered to be between $42,000 and $125,000, according to the Pew Research Center. Low-income would be anything under $42,000 and upper-income is above $125,000. Here in the Bay Area, an income of $100,000 is now considered low income.

I believe that if I can share a design hack to make life more simplistic and easier to manage, I should. Transitioning into a zero waste lifestyle started this momentum for my blog. Living a zero waste lifestyle made life simple, cleaning became quick and easy, I even saved money and minimized the errands I had to run during my free time. My daily routine improved and I enjoyed going to work each day as well as coming home and relaxing. You can read more about my story here.

Two pieces of advice if you just start with your blog:

  • Schedule out what topic you want to talk about and how to correlate them with your social media. Also, stay on top of your social media.

  • Network, network, network… find bloggers who blog about similar topics as you and collaborate with them. Whatever the purpose of your blog , finding a community to share your ideas and posts with will greatly help expand your viewing statistics and increase visitors to your website.

My nominees!

When you are nominated, there are a few simple steps that you need to take to accept the award nomination. These are the guidelines:

  1. Write a post about your award

  2. Thank the blogger who nominated you and provide a link to her blog

  3. Give a brief story of how your blog started

  4. Give two pieces of advice for new bloggers

  5. Select up to 15 other bloggers to nominate

  6. Comment on each blog and let them know you have nominated them and provide the link to the post you created.

Congratulations to all nominees! You are an inspiration to me! Once again, many thanks to Emilia, from The Green Choice, for nominating Design Life Hacks.

With Love Always,

Yen-Van Tran

 

Advertisements

Eco-Friendly Christmas

10.15.2017

0600

Fall Leaves2

Having an Eco-friendly holiday isn’t as daunting as it sounds. It might sound complicated because the concept is different, but it’s actually pretty simple.  So for each holiday there are basic aspects of the holiday celebration I like to check off: decorations, food and entertainment. I don’t always cover all three categories equally and majority of my focus will usually be on the food.

Christmas.jpg

Decorations tend to be covered easily being that Christmas is such a huge holiday celebrated. Honestly, any type of decoration that is compostable or reusable is a good idea. Here are some ideas for zero waste holiday.

  1. Decoration Ideas:
    1. Seasonal
      1. Seasonal leaves, fruit, create a centerpiece suing branches and colorful seasonal leaves.
    2. Christmas
      1. Use existing jars filled with some seasonal and colorful leaves to decorate the table
      2. Use branches and leaves from outside to decorate the table surface

mountain-view-whole-foods-market-bulk-bins

  1. Zero Waste Food
    1. Consider using fresh fruits and vegetables as ingredients in your dishes. You can compost the skin or the non edible pieces after
    2. Buy your ingredients from the bulk aisle or bulk bins
    3. For ingredients that usually come in packaging, consider making your own homemade version or looking for it in paper, aluminum or glass packaging
    4. Share recipes or give the gift of different types of dishes to one another

Notebook

Gift ideas can be tricky for this holiday since it’s based around an iconic tree as well as what surrounds it on Christmas Day. However, here are a few ideas for zero waste gifts, you might want to consider. Check social media sites (Groupon, Living Social, Ticketmaster, etc.) for great deals for events and activities for family and friends during the holidays.

  1. Gift Ideas:
    1. Compostable Gifts
      1. Food, snacks, bulk candy wrapped in reusable packaging or compostable packaging
      2. Buy bulk foods and create a recipe kit for a gift
      3. Seasonal fruit, fruit basket gift
    2. Gift of Goods and Products
      1. Consider checking out thrift stores to find a gift for the recipient
      2. If you want to give a new gift, look for gifts with no packaging or recyclable paper packaging
    3. Gift of Experiences
      1. Sporting events ( football, soccer, tennis, gymnastics, baseball, etc.)
      2. Theme parks (check for local theme parks near you or near the recipient)
      3. Outdoor experiences (pedle boating, wind sailing, kayaking, rowboats, canoes, skydiving, zip lining, rock climbing, trampoline time, golfing, etc.)
      4. Gift card or money for food & drinks (breakfast, lunch, dinners, coffee, tea, desserts, wine bar, wine/beer tour)
      5. Gift card or money for activities (cooking classes, yoga, spin class, kickboxing, zip lining, etc.)
      6. Gift card/money for events (museums, concerts, festivals, fairs, movies)
      7. Gift card or money to treat yourself (spa, massage, facial)
    4. Service Ideas (This will differ based on location, so check your local listings)
      1. Volunteer for a charity or organization that will help hand out food during the holidays
      2. Donate toys, clothes, coats, shoes to an organization that will help distribute them this season
      3. Volunteer your time in a hospital, care home, nursing home to those who may not have family near or at all

DSC_7446

  1. Gift Wrapping:
    1. Reusable cloth gift bags with string to tie bows (if wanted)
    2. Fabric sheets or bandanas to wrap and tie around gifts
    3. For the larger gifts, I’ll use a pillowcase or really large bed sheets to wrap the gifts
    4. For medium sized gifts, I’ll wrap the gift in an extra t-shirt.

00- Streaming Media.png

Entertainment during the holidays can be daunting as well. Usually families have kids around or simply need entertainment playing while the day is happening. 

  1. Entertainment
    1. Movies- if you are able to stream movies, there are a few great resources to stream holiday movies during this time. Check YouTube or other streaming media, they usually have full movies uploaded to watch.
    2. Board Games – Ask your guest if they have any board games to play or would want to bring for the kids to share and play with
    3. Card Games – these games are always fun because a deck of cards can be really versatile

I hope this outline helped to brainstorm ideas for you. This is an overall idea list and if you want to check out other holiday blog posts, check out these holiday blog posts from these websites:

Car Hack for Cell Phone Calls

09.19.2017

0600

Materials:

  • Cotton Rope

Tools:

  • Know your knots
  • Scissors

This is a very simple hack and I use it when I put my phone calls on speaker mode. I simply tied two ropes around my car visor where it was tight enough to carry the weight of my cell phone. The ropes still don’t interfere with my visor mirror use as well.

The rope loop on the left side of my visor was tied as it was placed on my visor, then tied off. The rope loop on the right side was actually measured by gauging how much rope I needed to wrap around the visor and then I tied a knot to close off that piece.  I slid it over the visor and because it was a tight squeeze, I knew the knot would naturally tighten more as I was trying to stretch the rope accordingly. I wanted this lop to be tight because it would carry more weight compared to the other one.

The right rope loops is tight enough to hold my cell phone in place in a vertical position. Sometimes I’ll write down my directions if I know I’m going somewhere, where I know I won’t get good reception and place the paper behind the left rope loop. These are good for lists too (ie. grocery lists, errand stop offs, to-do lists, etc).

If I’m driving long distances and I need to swing my visor out to block out the sun from the driver’s side window, I’ll usually slide the phone in on the other side of the visor. It will still hold it in place and technically, the microphone will be even closer to hear and speak into. If you do use this method, just remember to not swing the visor too aggressively. If you do need to use your visor for a short time, keep in mind which side of the visor your phone is on.

So there you have it, my very simple car hack for cell phone speaker mode.

Please don’t text while driving.

DSC_6497

 

DSC_6495DSC_6504

Backpack Hacks

08.15.2017

0600

 

With all of my backpacks that I have ever owned, I hack them the exact same way as I always have. Going back as far as middle school, I always had to hack my backpacks. It was my way of customizing my carrier to my exact needs and over time I would edit it as my needs changed. Within each compartment I always created some type of hanging or attachment mechanism to hang my water bottles, extra bags within the compartments or hang something I needed access to immediately. most of the time I hung items that I needed access to so that those items weren’t at the bottom of my bag, where I had to go digging around to look for them.

 

Front of the backpack

  • I always attach extra reflectors so that in low light, vehicles or any type of light can bounce off of my backpack and I can be visible. These reflecting straps are for bikers, but I took two of the straps and weaved them through my exisitng strap set up.

DSC_4842

  • For all of my zippers that open to significant compartments, I always sew a section of the zipper, so it limits the access to that compartment to only one direction of movement for the zipper. I prefer to only have access in one direction for the zipper movement so it’s easier to watch over and maintain. I also attach metal rings right below the point of the sewing block (through the exposed zipper tape) so that I can use this ring to lock my carabiners from the outside but to also hang items on the inside of the bag.

 

 

DSC_6510

DSC_6526

 

 

  • On the inside, I hook extra interior metal rings with carabiners to the exterior rings that are popping through the tape so I can hang items on the inside. I’ll hang my water bottle from these interior rings (when my external water bottle pocket has my coffee tumbler in it) or small bags so I can keep items separated in the same compartment. These interior rings are there for anything that needs to be hanged or utilized.

 

00-eas.260.2007_010_01DSC_6511

DSC_6513

 

Sides of the backpack

  • I also sew blocking for my smaller compartments and create a locking system for these pockets as well. For the smaller pockets, it really just depends how and where you want to secure the pocket. I chose to insert an extra ring so that I could attach an extra carabiner to it and lock the zipper with it.

 

 

DSC_6533DSC_6534

 

  • For my external water bottle pocket, I usually take one of the extra backpack straps (that I trimmed off)  to create a safety strap for the external water bottle pocket so that it can hold taller water bottles more securely. There have been a few incidents where my external water  bottle pocket wasn’t deep enough and due to the fact that I had so much stuff in my backpack, my water bottle managed to get squeezed out of the pocket.

DSC_6518

Back of the backpack

  • I usually trim the extra strap slack that comes with the backpack straps. I don’t like any loose hanging straps so I will measure how high I want to carry my backpack and trip, then hem the straps accordingly.
  • For my backpack straps, I like to keep my smaller items very close to me. So I will attach some type of pocket (large enough to fit my “wallet” items and my cell phone) to the front. This backpack didn’t come with a pocket for those types of intimate items.

DSC_6538DSC_6537DSC_6540

 

  • I also ALWAYS, ALWAYS attach an extra carabiner to the other strap, so I can hook my keys onto my strap quickly.

 

DSC_6531 - Copy.JPG

 

So there you have it, those are the hacks I made for this backpack. This is my day to day back pack, so I’ll run to the store or go hiking with it. I do have another hiking backpack that’s a 65 gallon capacity for traveling and I’ve hacked that accordingly as well. Hopefully you may see a hack i described here that you would like to use on your own backpacks or carrying bags that you may want to use.

 

Make-Up Brush Bag Hack

05.09.2017

0700

Materials:

  • Plastic store bought brush bag

Tools:

  • Razor Blade or scissors (Please be careful when using the razor blade)

So I bought an e.l.f. Angled Blush Brush from Target back in 2016 and it came in a clear plastic bag such as the ones in the pictured below. I didn’t want to add it to my trash collection, so I set out on trying to figure out how to convert it into a product that would be useful in mylife.

Elf_Brushes

I knew I wanted to create a holder for all of my brushes (luckily I only use two types of brushes) So I came up with this design to hold my vertical make up tools, such as my mascara, eyeliner pencil, angled blush brush and my EcoTools, Bamboo Smudge Eyeliner Brush.

I sewed the flap that covered the holder to the bag itself. I did this because, I didn’t want to remove the flap to access a clean opening but to also reinforce the bottom of the holder. (At this point I had decided to hang this object as a vertical brush holder).

I opened the other end of the holder by cutting a small slit across the top side of the bag and hold punched a hole on the opposite side. I only put one hole punch on one side because I would be using that side to hang the bag and I didn’t want anything blocking the opening of the bag. Lets call the hole punch end the “Top” and the sewed end of the bag, the “Bottom”. (you kinda have to picture this bag vertically hanging like that)

I used a permanent marker to show you where I placed my cuts on each side of the bag. On the same side as the hold punched hole, I sliced a longer slit on the bottom third of the bag. On the opposite side of the bag, I sliced a shorter cut closer to the top. These cuts do not cut through both walls, please keep that in mind. This design will only work if both walls of the holder are not cut at the same spot.

dsc_5428dsc_5431

For the taller brushes, I am able to insert both of my brushes through the opening at the top, however, I can also slide the brush I tend to use through the slit towards the top.

dsc_5432

The same rule applies for the slit towards the bottom third of the bag. I can use the slit I had created to hold my mascara and eyeliner but be able to access them from the outside. The next few images demonstrate the versatility of the cuts better than how I’m describing them.

dsc_5433dsc_5435

Here is what the bag looks like when it’s hanging up and being utilized. You can see that my EcoTools, Bamboo Smudge Eyeliner Brush is inserted through the opening I had created (towards the top of the bag) and that my angled blush brush is actually on the inside of the bag. I use my Eyeliner brush more than my angled brush so this is why I keep it on the outside, for easy access. On the opposite side of the bag, you can see my small eyeliner and mascara sticking out from the small opening I had created towards the bottom. I also use my mascara and eyeliner often so I like to have access to them easily.

dsc_5439dsc_5440

DSC_5652DSC_5654

When I travel or move around with my makeup brushes, I can easily tuck everything inside the bag and nothing with get caught during transportation. I actually do have a bag for my toiletries when I travel and this brush holder goes into that bag as well.  The last image shows what the brush holder looks like once everything is tucked inside the entire bag. I know that this bag with eventually fall apart and I will end up adding it to my trash pile, but as long as I don’t stretch the plastic by putting too many items into this holder, it might hold up well.

This is a simple and interesting design manipulation of what we receive along with products we buy and how to re-design them to accommodate to our own needs.  I really like this design manipulation because I tend to hang things a lot and I didn’t have to throw any packaging away.  I hang things a lot because I like to keep my surfaces clean. Maybe this design might accommodate you somehow, I hope it will.