What’s In My Purse?

06.12.2018

0600

DSC_9989Since I’ve written about What’s in My Makeup Bag? and What’s in My Sport Emergency Kit?, I thought I’d show you what I carry around in my purse too. These are the items I use daily and essentially, and these include my zero waste essentials.

So an overall view will reveal that I usually carry my water bottle, my eyeglasses case, purse, keys, sunglasses, my reusable utensils, my cloth napkin and my cloth handkerchief.

Sometimes I will switch out my water bottle with my tumbler, if I’m going to grab coffee. Most of the time I’ll usually carry my water bottle instead of my tumbler because water is more critical for me on a day to day basis.

In my purse, (which is a pencil bag, because pencil bags tend to have more pockets and are washable) I’ll carry my cards and cash, a small bottle of lotion, a comb, my business cards case, a barrette, extra hair ties, my lip balm, lipstick, eyeliner, my mini 3 in 1 stainless steel screwdriver key chain eyeglass repair tool, extra bobby pins (because you can never have enough), and a nail filer.

 

DSC_9999The only perishable and wasteful items I carry on a daily basis is my lip balm and my lipstick. I refill my bottle of lotion from my bulk lotion bottles. Anyone who uses hair ties knows that they tend to break and I haven’t yet found a good alternative to tie up my hair. I might lean towards going back to the scrunchie though. With the extra protective fabric around the hair tie, the life of the hair tie can last longer.

So there you have it. My purse is simple, and I don’t carry extra stuff around to the point where I can’t find anything in my bag. I tend to divide my items into smaller bags so that they’re grouped together in a more organized fashion. These are my day to day essential items, what do you carry around in your bag?

 

Advertisements

Bathroom Purchases With Packaging

06.05.18

0600

DSC_9811

I’ve talked about what I don’t buy, but I thought I’d tell you about what I do buy in relation to my daily bathroom routine. When I go grocery shopping, there are items I do keep an eye out for. These items are the items I will use on a daily basis and keep stock of at home. So here it is…

What I stock up on:

  1. Baking Soda
  2. Sunscreen
  3. Toothbrush
  4. Face Moisturizer
  5. Eyeliner (used often)
  6. Mascara (used often)
  7. Eye Shadow (used often)
  8. Lip Balm
  9. Dental Floss
  10. Night Cream
  11. Apple Cider Vinegar
  12. Toilet Paper

Not used often:

  • Essential oils
  • Liquid Foundation (Vegan Makeup)
  • Matte Bronzer (Vegan Makeup)
  • Lipstick (Vegan Makeup)
  • Angled Blush Brush

There are other investments that I bought a while back, which did produce some form of trash, but they were only a one time investment.

One time investments:

  • Cornstarch
  • Cacao Powder
  • Crystal Deodorant
  • Pumice Stone
  • Set of Dental picks
  • Set of stainless steel ear pick tools

Morning: Before Workout Routine: In the morning I will wash my face with soap and brush my teeth with baking soda. I’ll then apply sunscreen before heading out, because skin cancer is real and the exposure to the sun’s rays can be very dangerous, so I take precautions.

DSC_9802

Morning: After Workout Routine: After working out, I’ll wash my face again and apply some dry shampoo (combination of equal parts cornstarch and Hershey’s Cocoa, here is the link to my blog post about DIY Dry Shampoo). I’ll then apply my makeup, and depending on the occasion, it might be more or less. My makeup is cruelty free and not tested on animals, but it does come in packaging that is not recyclable. The good part about my makeup routine is that I don’t use excessive amounts of it so I don’t use up my makeup quickly.

DSC_9815

When I do decide to get more dressed up, my makeup packaging includes all of the following packaging below. All of my makeup will come with the makeup container as well as the makeup packaging as well.

2016-10-15- Makeup0

Evening Routine: My evening routine mimics my morning routine, where I will floss my teeth, brush my teeth, wash my face with soap, and then apply my evening cream.

DSC_9828

Non-Daily Use Items: There are a few “one time purchase” items that I did invest in, which did produce some form of trash that was not recyclable. However, these were one time purchases and they’ve lasted a very long time. These items include my deodorant crystal, pumice stone, dental pick set and my set of stainless steel ear pick tools. (The Visine is rarely used and I doubt I’ll ever purchase it again.)

DSC_9829

For the Bathroom: Products I use to clean my bathroom or need to stock up on, include Apple Cider Vinegar, paper wrapped toilet paper and essential oils. The essential oils does get used, but not often. I always buy toilet paper wrapped in paper so that I don’t produce any extra plastic trash.

DSC_9841

Living a zero waste lifestyle can never truly be completely zero waste. Trash will be produced at one point or another; whether it’s in the beginning of the production line or at the very end where the consumer is left with it. When you purchase products in bulk, a lot of the packaging is left for the distributor to deal with.

This post was a transparent view of the reality of my own bathroom trash. Even though I do still produce a bit of trash, I have significantly reduced the amount of my bathroom trash since I began this zero waste journey. Still, to this day, I know I can reduce it even more, but that means I have to give up using certain products or try to find alternative products.

 

Rollup Christmas Tree

11.28.2017

0600

Materials:

  • 8 baseboards at 28″ long
  • 15 pieces of 12″ long thin twine rope
  • Extra: Matches to melt the ends of the twine together so it doesn’t come apart over time)

Tools:

  • Miter Saw
  • Drill & Drill Bits (Need 1’8″ drill bit for all holes)

DSC_7280 - Copy.JPG

  • Measure each base board at appropriate length
  • Organize each baseboard to it’s general location on the tree formation and mark the corners of where you plan to make the 45° cuts. I made my marks for my 45° cuts on the bottom edges of my baseboard pieces so my baseboard lengths would stay consistent.
  • Using a Miter Saw, take each baseboard and cut each end of each baseboard at 45°
  • Starting with the top of the tree, mark off each of the holes for each piece.

DSC_7315

DSC_7287 - Copy.JPG

DSC_7285 - Copy

DSC_7289

  • Drill each hole to create openings
  • Using the twine pieces, start tying the pieces together. To keep each space consistent, I tied the knots towards the end of the rope and the same amount of twine end to melt later.

DSC_7293

It’s a simple tree where the clean up is just rolling up the tree.  When I put up the Christmas lights, I simple wrap them around the edges of the pieces. I usually go in one direction so that the lines are more evenly spaced. Same as my blog post Minimalist Christmas Tree, I hang my ornaments off of the lights. For the more fragile ornaments, I hang them from paperclips and then hang them from the cord.

This was created as an option to not use push pins on the wall, but it was an interesting take on a holiday tree as well. Give it a try if you’re interested, and you can even change out the material I used too.

DSC_7347

DSC_7402DSC_7409DSC_7417

DSC_7488

 

 

Minimalist Christmas Tree

11.21.2017

0600

Materials:

  • Christmas lights (Used a 25′-0″ length Christmas Light cord)
  • Ornaments
  • Paper clips (Used 14 for the tree + a few extra)

Tools:

  • Measuring Tape

Christmas is one of those holidays that comes with more decorating than the others. It’s not just the food that’s plentiful, but the decorations as well. Which means of course, that I was determined to minimize my decorations for this holiday.

My family has always used a fake tree so we always knew exactly how much mess to expect when decorating for this holiday. However, I wanted to figure out a way to simplify that. This lead to my Christmas tree design, made up of Christmas lights.

DSC_7454 - Copy

I wanted the base to be 36″ wide, simply because it was the width of a standard door. For a 25′-0″ cord I was using, it seemed like a good base point. I first plugged in my cord and measured out 36″ in the direction I wanted my tree to be located, and then 6″ up. At that point, I placed a pushpin. I then hooked a paperclip to my cord so that it would reach the pushpin. This 36″ length of the cord would create the bottom branch of the tree.

DSC_7783

From there, I measured out 34″ of the next section of the cord and moved in the opposite direction of the bottom branch and measured 6″ up, where I placed the next push pin. I straightened my 34″ section of the cord and placed a paper clip onto it and hooked it onto that pushpin.

I repeated these steps, for each branch of the tree, where each time I subtracted two inches for each branch and measured six inches up to place the next push pin. The height of your tree will really depend on the width of your bottom branch. If you have a longer length of cord and you want the bottom branch to be wider, you can do just that. However, if you have a longer cord and you still start out at a 36″ wide bottom branch, your tree will be taller, which may look just as beautiful.

If you really want to test out how far your can push this design, link up two cords and see how tall you can make it. However, the longer the cord, the wider the base should be. The sequence for each branch will still be the same. The height of this tree ended up at about six feet high from the floor.

DSC_7475
DSC_7463

DSC_7469

I hung my ornaments around each light and distributed them as needed. If you have trouble hanging the ornaments up, hang the lighter ornaments on the lights themselves and hang the heavier ornaments on the pushpins. If you have delicate or fragile ornaments, consider double looping them around a Christmas light or using a paperclip to hang them up by securing it to the branch (the way you secured the previous paper clips to the pushpins).

DSC_7787
DSC_5196

A lot of my ornaments are fairly light and I create ornaments from old keychains I’ve collected over the years. You can click on that blog post, Christmas Ornaments Hack and read about how I made them. It’s interesting when I stand back and look at the tree, because even the keychain pendants have a unique memories tied to them.

You can place a blanket in front of the tree to place presents on and it’ll still look like and regular Christmas Tree. I like to wrap my gifts in reusable fabric and reusable fabric bags and place them under the tree. I wrote about how to create a Zero Waste Christmas or an Eco-Friendly Christmas, in my other blog posts and you can check it out if you’d like any ideas.

Well there you have it, my minimalist Christmas tree. If this works for you that’s great! I hope this blog post inspires you or jogs up some ideas for you.

DSC_7446

 

 

 

Blogger Recognition Award

11.14.2017

0600

blogger-recognition-award-badge

 

I am very happy to announce that Design Life Hacks has been nominated for the Blogger Recognition Award! After many topics and posts that I’ve covered, I’m glad that I still can create interesting content. 😊

What is the Blogger Recognition Award?

Blogger Recognition Award is given to bloggers by bloggers to encourage and acknowledge the hard work and effort that goes into creating posts. It’s an opportunity for bloggers to recognize one another for each of our contributions. A big thanks to Emilia Cantero Dieguez from The Green Choice for the nomination!

How my blog started?

Living in the Bay Area in California, located in the United States of America, life can be pretty stressful. Nationally, a middle class yearly income for a household of three people is considered to be between $42,000 and $125,000, according to the Pew Research Center. Low-income would be anything under $42,000 and upper-income is above $125,000. Here in the Bay Area, an income of $100,000 is now considered low income.

I believe that if I can share a design hack to make life more simplistic and easier to manage, I should. Transitioning into a zero waste lifestyle started this momentum for my blog. Living a zero waste lifestyle made life simple, cleaning became quick and easy, I even saved money and minimized the errands I had to run during my free time. My daily routine improved and I enjoyed going to work each day as well as coming home and relaxing. You can read more about my story here.

Two pieces of advice if you just start with your blog:

  • Schedule out what topic you want to talk about and how to correlate them with your social media. Also, stay on top of your social media.

  • Network, network, network… find bloggers who blog about similar topics as you and collaborate with them. Whatever the purpose of your blog , finding a community to share your ideas and posts with will greatly help expand your viewing statistics and increase visitors to your website.

My nominees!

When you are nominated, there are a few simple steps that you need to take to accept the award nomination. These are the guidelines:

  1. Write a post about your award

  2. Thank the blogger who nominated you and provide a link to her blog

  3. Give a brief story of how your blog started

  4. Give two pieces of advice for new bloggers

  5. Select up to 15 other bloggers to nominate

  6. Comment on each blog and let them know you have nominated them and provide the link to the post you created.

Congratulations to all nominees! You are an inspiration to me! Once again, many thanks to Emilia, from The Green Choice, for nominating Design Life Hacks.

With Love Always,

Yen-Van Tran

 

Eco-Friendly Christmas

10.15.2017

0600

Fall Leaves2

Having an Eco-friendly holiday isn’t as daunting as it sounds. It might sound complicated because the concept is different, but it’s actually pretty simple.  So for each holiday there are basic aspects of the holiday celebration I like to check off: decorations, food and entertainment. I don’t always cover all three categories equally and majority of my focus will usually be on the food.

Christmas.jpg

DSC_8108.JPG

Decorations tend to be covered easily being that Christmas is such a huge holiday celebrated. Honestly, any type of decoration that is compostable or reusable is a good idea. Here are some ideas for zero waste holiday.

  1. Decoration Ideas:
    1. Seasonal
      1. Seasonal leaves, fruit, create a centerpiece suing branches and colorful seasonal leaves.
    2. Christmas
      1. Use existing jars filled with some seasonal and colorful leaves to decorate the table
      2. Use branches and leaves from outside to decorate the table surface

mountain-view-whole-foods-market-bulk-bins

  1. Zero Waste Food
    1. Consider using fresh fruits and vegetables as ingredients in your dishes. You can compost the skin or the non edible pieces after
    2. Buy your ingredients from the bulk aisle or bulk bins
    3. For ingredients that usually come in packaging, consider making your own homemade version or looking for it in paper, aluminum or glass packaging
    4. Share recipes or give the gift of different types of dishes to one another

Notebook

Gift ideas can be tricky for this holiday since it’s based around an iconic tree as well as what surrounds it on Christmas Day. However, here are a few ideas for zero waste gifts, you might want to consider. Check social media sites (Groupon, Living Social, Ticketmaster, etc.) for great deals for events and activities for family and friends during the holidays.

  1. Gift Ideas:
    1. Compostable Gifts
      1. Food, snacks, bulk candy wrapped in reusable packaging or compostable packaging
      2. Buy bulk foods and create a recipe kit for a gift
      3. Seasonal fruit, fruit basket gift
    2. Gift of Goods and Products
      1. Consider checking out thrift stores to find a gift for the recipient
      2. If you want to give a new gift, look for gifts with no packaging or recyclable paper packaging
    3. Gift of Experiences
      1. Sporting events ( football, soccer, tennis, gymnastics, baseball, etc.)
      2. Theme parks (check for local theme parks near you or near the recipient)
      3. Outdoor experiences (pedle boating, wind sailing, kayaking, rowboats, canoes, skydiving, zip lining, rock climbing, trampoline time, golfing, etc.)
      4. Gift card or money for food & drinks (breakfast, lunch, dinners, coffee, tea, desserts, wine bar, wine/beer tour)
      5. Gift card or money for activities (cooking classes, yoga, spin class, kickboxing, zip lining, etc.)
      6. Gift card/money for events (museums, concerts, festivals, fairs, movies)
      7. Gift card or money to treat yourself (spa, massage, facial)
    4. Service Ideas (This will differ based on location, so check your local listings)
      1. Volunteer for a charity or organization that will help hand out food during the holidays
      2. Donate toys, clothes, coats, shoes to an organization that will help distribute them this season
      3. Volunteer your time in a hospital, care home, nursing home to those who may not have family near or at all

DSC_7446

  1. Gift Wrapping:
    1. Reusable cloth gift bags with string to tie bows (if wanted)
    2. Fabric sheets or bandanas to wrap and tie around gifts
    3. For the larger gifts, I’ll use a pillowcase or really large bed sheets to wrap the gifts
    4. For medium sized gifts, I’ll wrap the gift in an extra t-shirt.

00- Streaming Media.png

Entertainment during the holidays can be daunting as well. Usually families have kids around or simply need entertainment playing while the day is happening. 

  1. Entertainment
    1. Movies- if you are able to stream movies, there are a few great resources to stream holiday movies during this time. Check YouTube or other streaming media, they usually have full movies uploaded to watch.
    2. Board Games – Ask your guest if they have any board games to play or would want to bring for the kids to share and play with
    3. Card Games – these games are always fun because a deck of cards can be really versatile

I hope this outline helped to brainstorm ideas for you. This is an overall idea list and if you want to check out other holiday blog posts, check out these holiday blog posts from these websites:

Car Hack For Cell Phone Calls

09.19.2017

0600

Materials:

  • Cotton Rope

Tools:

  • Know your knots
  • Scissors

This is a very simple hack and I use it when I put my phone calls on speaker mode. I simply tied two ropes around my car visor where it was tight enough to carry the weight of my cell phone. The ropes still don’t interfere with my visor mirror use as well.

The rope loop on the left side of my visor was tied as it was placed on my visor, then tied off. The rope loop on the right side was actually measured by gauging how much rope I needed to wrap around the visor and then I tied a knot to close off that piece.  I slid it over the visor and because it was a tight squeeze, I knew the knot would naturally tighten more as I was trying to stretch the rope accordingly. I wanted this lop to be tight because it would carry more weight compared to the other one.

The right rope loops is tight enough to hold my cell phone in place in a vertical position. Sometimes I’ll write down my directions if I know I’m going somewhere, where I know I won’t get good reception and place the paper behind the left rope loop. These are good for lists too (ie. grocery lists, errand stop offs, to-do lists, etc).

If I’m driving long distances and I need to swing my visor out to block out the sun from the driver’s side window, I’ll usually slide the phone in on the other side of the visor. It will still hold it in place and technically, the microphone will be even closer to hear and speak into. If you do use this method, just remember to not swing the visor too aggressively. If you do need to use your visor for a short time, keep in mind which side of the visor your phone is on.

So there you have it, my very simple car hack for cell phone speaker mode.

Please don’t text while driving.

DSC_6497

 

DSC_6495DSC_6504

Sewed Fabric Bags For My Makeup Tools

05.23.2017

0600

DSC_5473

So originally, I had created these bags for my Utensil To-Go Kit, and I realized that I could create smaller bags for my make-up tools. So I tested it out and this is what I came up with.

I had some old zippers from awhile back that I never used and these were a great fit. I first undid and removed the drawstring from the bag. Then I cut the original bag in half and sewed the sides of each to create two smaller bags. Because I cut straight thorough the original drawstring hem, I took the string and also cut that in half.

I measured each zipper and made appropriate cuts on the front of each bag for each zipper. Using small sewing pins, I attached each zipper to each bag and then I hand sewed the zippers to the bags. I inserted the smaller drawstrings through the new drawstring hems and tied them off.

The end product were bags that could be accessed through the zipper or through the top where the drawstring closed the bag. This was an interesting solution because when I place items in these type of bag designs, I never have items of all the same height. This bag allows me to access the taller items from the top opening and the smaller items from the front where the zipper is located. I’ve used this for make up tools, writing utensils and also my “Take Out Silverware Kit” that I keep in my purse.

DSC_5474DSC_5475DSC_5480DSC_5481DSC_5482DSC_5483

Creating A Locking Mechanism For My Carabiners

05.16.2017

0700

DSC_5455

I’m a big fan of carabiners. I have all different types and designs, however, I tend to favor the Asymmetrical D-Shape. On a whim a few years back, I bought two S-Binder carabiners. I really liked this design because the items I would place on the bottom half of the carabiner were separated from the top half. The top lever was the lever that I would use to hook and unhook the carabiner to other objects.

This also lead to an issue with the way in which I used it. Each time I would wrap my hands around the carabiner to press open the top lever,  I would inadvertently press my palm against the bottom lever and the objects had a very good chance to slide out. This involuntary action happened a few times and I had to come up with a quick solution.

DSC_5456

First, I wrapped a small piece of Velcro around the bottom lever, but over time, the Velcro started to become weaker and would become unattached, which left the end flap of the Velcro unattached. I knew I had to come up with a more permanent solution. I knew other carabiner brands sold their Asymmetrical D-Shape carabiners with locking mechanisms or had an external accessory that helped lock their levers in place. I had to make my own locking mechanism in order for me to not drop my keys all over the place.

DSC_5457DSC_5459

I took a old piece of an iron on elbow patch (I had bought a set years ago and never used them all up), and I cut the length to the distance that it would take to cover the lever and half of the basket of the carabiner. (If you don’t know where the ‘basket’ is, I labeled all of the parts of a carabiner in the first image).

With a few sewing needles, I marked the locations of the fabric of which I would have to sew the fabric together. I removed the fabric from the carabiner and sewed it up. I needed to create a snug fit for the locking mechanism so that the fabric didn’t move easily when in use. When I sewed my second locking mechanism, I sewed it a little too snug, but with fabric, you have a slight chance to stretch the length and width of any product due to the material. This was material for iron-on elbow patches, so it was a very, very slight stretch .

Once I was finished sewing both the locking mechanisms, I slid the pieces on, moved my key rings over them and then slid it back over the levers. It’s a simple solution to a very basic tool I use everyday.

If you use any other kind of fabric, perhaps 100% cotton,  you may have to sew it a little tighter because cotton tends to stretch more. And, you may want to extend the length of the locking mechanism so that it can’t slide back and forth on the basket as easily. The idea is to make the fabric slight “stuck” on the spine of your carabiner. If it has a hard time sliding around the basket, then it most likely won’t slide around when in use.

I hope this might give any of you some ideas as to how to approach design problems such as this one. Happy sewing and don’t loose those keys!

DSC_5461

DSC_5462DSC_5463DSC_5464

DSC_5466DSC_5468

A Climber’s Guide To Carabiners

Make-Up Brush Bag Hack

05.09.2017

0700

Materials:

  • Plastic store bought brush bag

Tools:

  • Razor Blade or scissors (Please be careful when using the razor blade)

So I bought an e.l.f. Angled Blush Brush from Target back in 2016 and it came in a clear plastic bag such as the ones in the pictured below. I didn’t want to add it to my trash collection, so I set out on trying to figure out how to convert it into a product that would be useful in mylife.

Elf_Brushes

I knew I wanted to create a holder for all of my brushes (luckily I only use two types of brushes) So I came up with this design to hold my vertical make up tools, such as my mascara, eyeliner pencil, angled blush brush and my EcoTools, Bamboo Smudge Eyeliner Brush.

I sewed the flap that covered the holder to the bag itself. I did this because, I didn’t want to remove the flap to access a clean opening but to also reinforce the bottom of the holder. (At this point I had decided to hang this object as a vertical brush holder).

I opened the other end of the holder by cutting a small slit across the top side of the bag and hold punched a hole on the opposite side. I only put one hole punch on one side because I would be using that side to hang the bag and I didn’t want anything blocking the opening of the bag. Lets call the hole punch end the “Top” and the sewed end of the bag, the “Bottom”. (you kinda have to picture this bag vertically hanging like that)

I used a permanent marker to show you where I placed my cuts on each side of the bag. On the same side as the hold punched hole, I sliced a longer slit on the bottom third of the bag. On the opposite side of the bag, I sliced a shorter cut closer to the top. These cuts do not cut through both walls, please keep that in mind. This design will only work if both walls of the holder are not cut at the same spot.

dsc_5428dsc_5431

For the taller brushes, I am able to insert both of my brushes through the opening at the top, however, I can also slide the brush I tend to use through the slit towards the top.

dsc_5432

The same rule applies for the slit towards the bottom third of the bag. I can use the slit I had created to hold my mascara and eyeliner but be able to access them from the outside. The next few images demonstrate the versatility of the cuts better than how I’m describing them.

dsc_5433dsc_5435

Here is what the bag looks like when it’s hanging up and being utilized. You can see that my EcoTools, Bamboo Smudge Eyeliner Brush is inserted through the opening I had created (towards the top of the bag) and that my angled blush brush is actually on the inside of the bag. I use my Eyeliner brush more than my angled brush so this is why I keep it on the outside, for easy access. On the opposite side of the bag, you can see my small eyeliner and mascara sticking out from the small opening I had created towards the bottom. I also use my mascara and eyeliner often so I like to have access to them easily.

dsc_5439dsc_5440

DSC_5652DSC_5654

When I travel or move around with my makeup brushes, I can easily tuck everything inside the bag and nothing with get caught during transportation. I actually do have a bag for my toiletries when I travel and this brush holder goes into that bag as well.  The last image shows what the brush holder looks like once everything is tucked inside the entire bag. I know that this bag with eventually fall apart and I will end up adding it to my trash pile, but as long as I don’t stretch the plastic by putting too many items into this holder, it might hold up well.

This is a simple and interesting design manipulation of what we receive along with products we buy and how to re-design them to accommodate to our own needs.  I really like this design manipulation because I tend to hang things a lot and I didn’t have to throw any packaging away.  I hang things a lot because I like to keep my surfaces clean. Maybe this design might accommodate you somehow, I hope it will.