Car Floor Mat Towel Sleeves

0600

04.01.2019

Materials:

  • 2 Bath Towels
  • 4 Hand Towels
  • Sewing Kit

Tools:

  • Sewing Kit
  • Sewing Machine

It’s interesting how we pick up habits from our parents or other figures in our lives. When the rain season comes, my  mother has always wrapped an old towel across her car mats to absorb the extra water that would get dragged in by everyday use. To this day, I’ll see her break out the towels around the middle of October.


As for me, I never cared for my floor mats in my car. I honestly never liked my car. The car was bought without my input and I was stuck with it thereafter. But recently I did get new car mats, along with a new car, and since I didn’t want to drag a bunch of water into my car, I too, wrapped my car mats in towels. But I soon realized that the towels would get tugged and moved around from the daily use of them. I had to solve this issue. I didn’t want to constantly re-tuck the towels under my car mats, because sometimes they were already dirty and wet.


The front floor mats were a large size and I knew that bath towels would be a perfect fit. I decided to make some towel sleeves for my car mats. Since my carpet in my car is black, I knew I had to find black towels to create my towel sleeves. With the towels sleeves, it would be easier to catch the dirt and rocks that would be brought into my car, and the towels would be easy to clean, since all I had to do was take off the sleeves and throw them into the washing machine. 

I found two bath towels that were 52″ long by 30″ wide. Since my front floor mats are about 31″ long and 21″ wide, I only needed the width of the floor mat sleeves to be about 22″ wide. the size of these bath towels would give me 26″ width. I didn’t mind if the towel wasn’t long enough to cover the length of my floor mat because the mat could stick out a little bit.

I folded the towel in half, length-wise and pinned the edges together, to prepare for the sewing process.

I wanted to leave one of the shorter edges open, so I could slide my floor mats in and out easily. In one continuous line, I sewed along the yellow arrows (in the picture below). For the corners of the towel, where the material was thicker, I angled the long sew line and continued on. I then went back and hand stitched the corners, so they would stay together better.

As you can see, the folded towel was still large enough to fit over my floor mat, and there was still extra room.

I placed each of the front floor mats into my car, and folded the edges underneath the floor mats accordingly. You don’t have to fold them under, but I chose to.

For the rear seat floor mats, I found eight hand towels to create the set in my car. My rear seat floor mats are 24″ long, by 16″ wide, so I found hand towels that were 26″ long and 16″ wide. The sewing process for these floor mat sleeves follows the previous steps for the front seat floor mat sleeves.

I stacked two hand towels on top of each other, making sure that the tag was facing inwards for both towels. I then sewed along the yellow arrows around the towels. I left one of the long edges open because I wanted to slide the floor mat in easily. For the corners of the hand towel sleeves, I angled the long, linear sew line to complete the stitch, and then I went back to each corner and stitched them together carefully. My machine doesn’t like it when the material gets too thick, because it can’t pass under the needle easily.

These rear seat floor mats had a lot of extra room around the edges, so I knew that I might have extra floor coverage.

This size hand towel seems to accommodate different car brands and the mats still fit really well within the parameters.

Now, when I need to clean my floors, I’ll just remove the floor mats from the towel sleeves and either wash them or shake them out. I might have to vacuum the edges, but that doesn’t take long at all. These towel sleeves makes my life a bit easier, by allowing me to keep my floor mats clean, and that’s always a good perk.

Advertisements

What’s In My Purse?

06.12.2018

0600

DSC_9989Since I’ve written about What’s in My Makeup Bag? and What’s in My Sport Emergency Kit?, I thought I’d show you what I carry around in my purse too. These are the items I use daily and essentially, and these include my zero waste essentials.

So an overall view will reveal that I usually carry my water bottle, my eyeglasses case, purse, keys, sunglasses, my reusable utensils, my cloth napkin and my cloth handkerchief.

Sometimes I will switch out my water bottle with my tumbler, if I’m going to grab coffee. Most of the time I’ll usually carry my water bottle instead of my tumbler because water is more critical for me on a day to day basis.

In my purse, (which is a pencil bag, because pencil bags tend to have more pockets and are washable) I’ll carry my cards and cash, a small bottle of lotion, a comb, my business cards case, a barrette, extra hair ties, my lip balm, lipstick, eyeliner, my mini 3 in 1 stainless steel screwdriver key chain eyeglass repair tool, extra bobby pins (because you can never have enough), and a nail filer.

 

DSC_9999The only perishable and wasteful items I carry on a daily basis is my lip balm and my lipstick. I refill my bottle of lotion from my bulk lotion bottles. Anyone who uses hair ties knows that they tend to break and I haven’t yet found a good alternative to tie up my hair. I might lean towards going back to the scrunchie though. With the extra protective fabric around the hair tie, the life of the hair tie can last longer.

So there you have it. My purse is simple, and I don’t carry extra stuff around to the point where I can’t find anything in my bag. I tend to divide my items into smaller bags so that they’re grouped together in a more organized fashion. These are my day to day essential items, what do you carry around in your bag?

 

What’s in My Sport Emergency Kit

12.19.2017

0600

DSC_7342

Depending on the season, I participate in annual sport activities each year. Since I enjoy hiking, snowboarding and surfing each year and each needed emergency kits, I figured out a way to combine my emergency kits into one kit. I had to create a Sport Emergency Kit that would work all year round. So this is what I included in my kit…

My larger items include:

  • First Aid Bandages (white bag)
  • Dry Bag (for wet clothes, which is the blue bag)
  • Emergency Flashlight (with a Radio, Compass, Flashlight and)Siren
  • Ropes
  • Bag of smaller items (black bag)
  • Female Urinal Funnel (black handkerchief wrap)

 

DSC_7337

In the white bag for bandages, there are:

  • 3 black bandanas
  • 1 triangle bandage
  • 2 Elastic Wrap Roll Bandages

 

DSC_7333

In the black bag of smaller items I have:

  • 1 pocket knife
  • 1 knife
  • 1 mirror
  • 1 knife sharpener
  • 1 SE FS374 All-Weather Emergency 2-IN-1 Fire Starter & Magnesium Fuel Bar
  • 1 deck of cards
  • 1 collapsable frisbee

DSC_7319

This is just an example of what is in my Sport Emergency Kit. it’s an example to follow if you chose to. You can add to it or simply use it as a template for what you might have in your own kit. I hope this helps and I hope the kit comes in handy when the time comes. If you want to check out what clothing items I keep on hand for each sport, check out Zero Waste Closet- Part II.

Rollup Christmas Tree

11.28.2017

0600

Materials:

  • 8 baseboards at 28″ long
  • 15 pieces of 12″ long thin twine rope
  • Extra: Matches to melt the ends of the twine together so it doesn’t come apart over time)

Tools:

  • Miter Saw
  • Drill & Drill Bits (Need 1/8″ drill bit for all holes)

DSC_7280 - Copy.JPG

  • Measure each base board at appropriate length
  • Organize each baseboard to it’s general location on the tree formation and mark the corners of where you plan to make the 45° cuts. I made my marks for my 45° cuts on the bottom edges of my baseboard pieces so my baseboard lengths would stay consistent.
  • Using a Miter Saw, take each baseboard and cut each end of each baseboard at 45°
  • Starting with the top of the tree, mark off each of the holes for each piece.

DSC_7315

DSC_7287 - Copy.JPG

DSC_7285 - Copy

DSC_7289

  • Drill each hole to create openings
  • Using the twine pieces, start tying the pieces together. To keep each space consistent, I tied the knots towards the end of the rope and the same amount of twine end to melt later.

DSC_7293

It’s a simple tree where the clean up is just rolling up the tree.  When I put up the Christmas lights, I simple wrap them around the edges of the pieces. I usually go in one direction so that the lines are more evenly spaced. Same as my blog post Minimalist Christmas Tree, I hang my ornaments off of the lights. For the more fragile ornaments, I hang them from paperclips and then hang them from the cord.

This was created as an option to not use push pins on the wall, but it was an interesting take on a holiday tree as well. Give it a try if you’re interested, and you can even change out the material I used too.

DSC_7347

DSC_7402DSC_7409DSC_7417

DSC_7488

Minimalist Christmas Tree

11.21.2017

0600

Materials:

  • Christmas lights (Used a 25′-0″ length Christmas Light cord)
  • Ornaments
  • Paper clips (Used 14 for the tree + a few extra)

Tools:

  • Measuring Tape

Christmas is one of those holidays that comes with more decorating than the others. It’s not just the food that’s plentiful, but the decorations as well. Which means of course, that I was determined to minimize my decorations for this holiday.

My family has always used a fake tree so we always knew exactly how much mess to expect when decorating for this holiday. However, I wanted to figure out a way to simplify that. This lead to my Christmas tree design, made up of Christmas lights.

DSC_7454 - Copy

I wanted the base to be 36″ wide, simply because it was the width of a standard door. For a 25′-0″ cord I was using, it seemed like a good base point. I first plugged in my cord and measured out 36″ in the direction I wanted my tree to be located, and then 6″ up. At that point, I placed a pushpin. I then hooked a paperclip to my cord so that it would reach the pushpin. This 36″ length of the cord would create the bottom branch of the tree.

DSC_7783

From there, I measured out 34″ of the next section of the cord and moved in the opposite direction of the bottom branch and measured 6″ up, where I placed the next push pin. I straightened my 34″ section of the cord and placed a paper clip onto it and hooked it onto that pushpin.

I repeated these steps, for each branch of the tree, where each time I subtracted two inches for each branch and measured six inches up to place the next push pin. The height of your tree will really depend on the width of your bottom branch. If you have a longer length of cord and you want the bottom branch to be wider, you can do just that. However, if you have a longer cord and you still start out at a 36″ wide bottom branch, your tree will be taller, which may look just as beautiful.

If you really want to test out how far your can push this design, link up two cords and see how tall you can make it. However, the longer the cord, the wider the base should be. The sequence for each branch will still be the same. The height of this tree ended up at about six feet high from the floor.

DSC_7475
DSC_7463

DSC_7469

I hung my ornaments around each light and distributed them as needed. If you have trouble hanging the ornaments up, hang the lighter ornaments on the lights themselves and hang the heavier ornaments on the pushpins. If you have delicate or fragile ornaments, consider double looping them around a Christmas light or using a paperclip to hang them up by securing it to the branch (the way you secured the previous paper clips to the pushpins).

DSC_7787
DSC_5196

A lot of my ornaments are fairly light and I create ornaments from old keychains I’ve collected over the years. You can click on that blog post, Christmas Ornaments Hack and read about how I made them. It’s interesting when I stand back and look at the tree, because even the keychain pendants have a unique memories tied to them.

You can place a blanket in front of the tree to place presents on and it’ll still look like and regular Christmas Tree. I like to wrap my gifts in reusable fabric and reusable fabric bags and place them under the tree. I wrote about how to create a Zero Waste Christmas or an Eco-Friendly Christmas, in my other blog posts and you can check it out if you’d like any ideas.

Well there you have it, my minimalist Christmas tree. If this works for you that’s great! I hope this blog post inspires you or jogs up some ideas for you.

DSC_7446

 

 

 

Blogger Recognition Award

11.14.2017

0600

blogger-recognition-award-badge

 

I am very happy to announce that Design Life Hacks has been nominated for the Blogger Recognition Award! After many topics and posts that I’ve covered, I’m glad that I still can create interesting content. 😊

What is the Blogger Recognition Award?

Blogger Recognition Award is given to bloggers by bloggers to encourage and acknowledge the hard work and effort that goes into creating posts. It’s an opportunity for bloggers to recognize one another for each of our contributions. A big thanks to Emilia Cantero Dieguez from The Green Choice for the nomination!

How my blog started?

Living in the Bay Area in California, located in the United States of America, life can be pretty stressful. Nationally, a middle class yearly income for a household of three people is considered to be between $42,000 and $125,000, according to the Pew Research Center. Low-income would be anything under $42,000 and upper-income is above $125,000. Here in the Bay Area, an income of $100,000 is now considered low income.

I believe that if I can share a design hack to make life more simplistic and easier to manage, I should. Transitioning into a zero waste lifestyle started this momentum for my blog. Living a zero waste lifestyle made life simple, cleaning became quick and easy, I even saved money and minimized the errands I had to run during my free time. My daily routine improved and I enjoyed going to work each day as well as coming home and relaxing. You can read more about my story here.

Two pieces of advice if you just start with your blog:

  • Schedule out what topic you want to talk about and how to correlate them with your social media. Also, stay on top of your social media.

  • Network, network, network… find bloggers who blog about similar topics as you and collaborate with them. Whatever the purpose of your blog , finding a community to share your ideas and posts with will greatly help expand your viewing statistics and increase visitors to your website.

My nominees!

When you are nominated, there are a few simple steps that you need to take to accept the award nomination. These are the guidelines:

  1. Write a post about your award

  2. Thank the blogger who nominated you and provide a link to her blog

  3. Give a brief story of how your blog started

  4. Give two pieces of advice for new bloggers

  5. Select up to 15 other bloggers to nominate

  6. Comment on each blog and let them know you have nominated them and provide the link to the post you created.

Congratulations to all nominees! You are an inspiration to me! Once again, many thanks to Emilia, from The Green Choice, for nominating Design Life Hacks.

With Love Always,

Yen-Van Tran

 

How I Got Started

11.07.2017

0600

Picture 045

San Francisco, it’s a beautiful city with so much history, it’s mesmerizing. This city made a significant impact on my life because my zero waste journey started with this city. I don’t share this story often, but I thought I’d finally give a background to how I started my zero waste journey seven years ago.

I had moved to San Francisco to attend graduate school. It was a big city with so many places, restaurants and activities to explore, I couldn’t even keep track of everything I wanted to do. At the time, I was working as an Emergency Medical Technician (EMT) for a large, and well know ambulance company.

Golden Gate Park

Fulton Avenue and Stanyan Avenue path into Golden Gate Park.

I had moved into a studio apartment in the Richmond District and it was on the third floor of a three story building. It was a beautiful studio. With hardwood floors and a cozy interior, I settled in. My building stood directly across the street from Golden Gate Park. It was an interesting location because on the weekends, the park was closed to cars on Saturdays, so the foot traffic was busy. I could also open up my windows on the weekends and I listen to the music performances from inside of the park. Since I was on the top floor, sunlight consistently illuminated my apartment all day and all year long.  I lucked out on that part because San Francisco can become very cold and foggy during certain seasons.

Golden Gate Park Entrance

One of the Golden Gate Park entrances off of Fulton Avenue. (at Fulton Avenue and Arguello Avenue)

I was raised and lived in the suburbs my entire life so living in a condensed large city was quite a new experience. All of my routines including grocery shopping, working out and even parking was new and took a bit of an adjustment. I parked on the street since my apartment didn’t have a parking lot. This is also how I learned to become a stealth car parking spotter. Understanding and knowing which streets you could park on in the city was a must in order to avoid parking tickets. San Francisco streets are each scheduled for street cleaning all week long on different days and at different hours, so you have to be careful of where you park, or you’ll get a ticket for blocking the street cleaner.

Living in San Francisco also introduced me to trash chutes. A trash chute is a smooth, open shaft in a multistory building, used to convey trash from upper floors to a collection room. My building’s trash chute could only be accessed from the exterior wooden staircase on the side of the building. From each floor, there was an door which allowed access to the staircase. The problem was that these doors were very heavy and never stayed open. It took quite a bit of effort to even open these doors and step out on the balcony in order to access the trash chute; it seemed that they were installed to slam shut. It could have been an issue with the spring on the door, but regardless, it took a lot of force to open the door and hold it open.

rec_zw_bins_group3_07

San Francisco also separates their trash out into categories: trash, recyclables and compostables. Therefore, I had to separate my disposable items. This is where my problem lay. When I first moved into the apartment, I thought the trash chute was great. It was useful, accessible and being that I was located on the third floor, it seemed convenient for me. However, it only gave access to the trash bin, not the compost bin or the recyclables bin.

When I used the trash chute, my trash bag would bounce around the chute all the way down to the trash bin. It made quite a bit of noise and I thought that wasn’t appropriate since I didn’t know if my neighbors worked night shifts or slept during the day. So I would carry my trash all the way down the narrow exterior stairs. These stairs were very old and were designed to be very narrow. This meant I had to carry my three seperate bags directly in front of me. Some weeks this was not ideal since  my bags would be so full, so I had to take two trips. Taking two trips meant that I would carry two bags down together, let the stairwell door slam shut behind me, walk down the exterior stairs and throw my bags away, exit the side yard in order to enter my building from the front. I would then walk up the inside staircase to my apartment, and grab the last bag to repeat this routine. In order for me to throw away all three bags, I routinely had to exit my building twice and enter it twice; all the meanwhile walking up and down two sets of stairs. I didn’t like taking two trips just to throw out trash, so I decided that I had to eliminate one of the bags.

San+Francisco+Passes+Toughest+Recycling+Law

This is where my zero waste journey began. In order to simplify my weekly “taking out the garbage routine,” I decided that getting rid of my trash bag would be the easiest solution. I had to first start swapping out all of my disposable items and figure out how to either replace the items with more sustainable solutions or eliminate them from my life completely. I decided to tackle all of my disposable items in the kitchen first. I started by swapping out my kitchen sponges for smaller washcloths, and then started buying food without packaging. That took a little bit more planning because I had to purchase glass tupperware and change my diet slightly. Changing my diet included giving up certain foods that came in packaging such as certain types of meat, candy, snacks and cereal. I switched those out for bulk snacks such as nuts, granola mixes, whole vegetables and fruit. I started eating whole grains for breakfast and really took solace in my progress towards a zero waste life.

Although swapping out disposable items meant that my laundry load would increase, it really didn’t increase by a lot. I went through my kitchen items and then moved over to my bathroom items. I paid attention to the materials of the items I was replacing my disposable with. I always tried to choose 100% cotton material, bamboo, stainless steel or glass. I then went through my clothes and started donating everything I didn’t need.

My journey to a zero waste life took about a year and half. It sounds like a significant amount of time, but if you think about auditing your entire life, there’s a lot of stuff to go through and get rid of. During my zero waste journey, I also started minimizing my life where I also implemented a minimalistic lifestyle.

I’m writing about this story of how I got started because truth be told, it started because I was lazy. That’s the honest truth. Each blogger has a story of how they got started and this is mine. A lot of bloggers tend to move towards this lifestyle based on their awareness of their own plastic use and it’s commendable that they started living with less plastic. I wanted to write my experience so that my audience may know that not all zero waste journeys need to start with fighting for the environment. Sometimes it happens on a fluke, a chance encounter, but that it’s very possible to live this way. I did notice the benefits of living a zero waste life as I dove deeper and deeper into it and the environmental impacts  became more evident as I continued on. But my story doesn’t start with an ethically conscious mindset. It started because the exterior stairs at my apartment building was too narrow to carry three bags down to the trash bin.

This is my story of how I got started to living a zero waste life. #truth

DSC_6957

 

Minimalist Cooking Hacks

09.26.2017

0600

As someone who likes to make my routines as simple as possible, I also try to create simple cooking habit routines as well. This approach simplifies the ingredients I buy and my grocery shopping haul trips. Here are seven simple tips and tricks for cooking hacks.

 

2017-04-30 14.35.27

1. Focus on Whole, Single-Ingredient Foods

  • Whole, single-ingredient foods are the key to good health.
  • Foods such as fruits, vegetables, nuts, legumes, whole grains, fish, poultry and eggs are great examples. These foods are incredibly nutritious and satisfying.
  • When you focus on whole foods and high-quality ingredients, you will automatically start to eat less processed junk foods.
  • Processed foods often come with misleading health claims and long lists of ingredients, many of which you can’t even pronounce. However, truly healthy foods don’t even need an ingredients list. They are the ingredient.

Bottom Line: Eating healthy can be quite simple. Stick to whole foods and avoid processed foods made with refined ingredients and artificial chemicals.

2017-04-30 14.35.29

2. Use Simple Flavorings

  • If you buy high-quality ingredients, you don’t need to add a lot of flavoring. Olive oil, salt and pepper may be enough.
  • Fresh herbs can also do wonders for a meal.
  • Try to avoid buying new flavorings unless they are something you think you will use often.
  • If a new recipe requires hard-to-find spices and condiments, you can most likely replace them with something you already have.
  • A rare ingredient that you will end up using only once is a waste of money and space in your kitchen. Most of the time, you can stick to common ingredients that you already own and know how to use.

Bottom Line: You don’t need to own a lot of rare ingredients in order to add flavor to your food. Simple ingredients like high-quality olive oil, salt and pepper can be used in almost anything you make.

DSC_4178

3. Clean Out Your Spice Cabinet

  • Most people keep a lot of herbs and spices on hand. That’s perfectly fine, as long as you use them regularly and don’t have duplicates.
  • If your spice cabinet is disorganized and overflowing with spices you never use, you might want to tidy it up a bit.
  • Try to combine duplicates into one container and donate spices you never use. Throw away/compost spices that are old or bland.
  • Having a tidy spice drawer will help you cook faster because it will be easier to find the spices you’re looking for.
  • A good rule of thumb is to go through your spices at least once per year.

Bottom Line: Having a tidy spice cabinet will make you more efficient in the kitchen. Keep spices you use regularly within reach and combine duplicates. Throw out old spices and donate the ones you never use.

2017-09-03.JPG

4. Keep an Organized, Minimalist Pantry

  • Keep a clutter-free pantry stocked with quality foods you use regularly. Preparing healthy meals will become much easier.
  • A clutter-free pantry also makes your food less likely to spoil, since you’ll be able to see all your food items neatly organized.
  • You’ll find it easier to navigate your pantry and locate the items you’re looking for when cooking. Here are a few tips to help you organize your pantry:
    • Optimize storage: Store items you often use on the bottom shelves or near the front. Items you use less often can be stored in the back or a little higher.
    • Sort and group: Designate shelves for similar items, such as keeping your canned foods on one shelf and your breakfast foods on another.
    • Label everything: Label all of your pantry items and store them in clear, well-sealed containers so that your foods don’t spoil.
    • Increase accessibility: Try to place items so they are either directly accessible or you can reach them after moving just one item.

Bottom Line: Taking the time to plan and organize your pantry will make both shopping and cooking easier and more enjoyable.

DSC_4445

 

5. Simplify Your Kitchen Tools

  • There are tons of clever gadgets you can purchase for your kitchen.
  • Yet many are nonessential, single-purpose appliances.
  • You don’t need fancy kitchenware to cook a great, healthy meal. Simple meals require just a few basics.
  • If your kitchen is cluttered with items you rarely use, consider selling or donating them. Focus on keeping the functional items you use on a regular basis — it’s a plus if they serve multiple purposes.
  • However, figuring out what’s essential is entirely up to you. This varies, and something you regularly use may seem unnecessary to someone else. What you use depends on your lifestyle, how you cook and what kinds of foods you like to eat.
  • Try storing the items you rarely use in a box. If you haven’t opened it in six months, then it’s probably safe to sell or donate those things.

Bottom Line: You don’t need highly specialized, fancy tools for most tasks in the kitchen. Consider selling or donating kitchenware you don’t use often and keeping only the most useful kitchen items.

DSC_4456

 

6. Think Before You Shop

  • You should think carefully before you purchase a new kitchen gadget.
  • Start by asking yourself if you really need it. If you’re not sure, think it over for one week before you decide to buy it.
  • Setting yourself a rule of “one in, one out” may also help. So for any new item you bring into the kitchen, another needs to go.
  • Think creatively and you might even be able to use something you already own in a different way than you’re used to.

Bottom Line: When it comes to kitchen appliances, less is more. Think carefully before you decide to add another item to your kitchen, especially if it’s an item that’s designed to perform just one specific task.

DSC_7149

7. Clear Your Kitchen Counter

  • It’s time to de-clutter your kitchen counter.
  • Store kitchenware you use less frequently in your cabinets and drawers instead of on the countertop.
  • This is especially important if you live in a small apartment with limited counter space.
  • You’ll have more room to prepare meals and you’ll probably enjoy cooking more if there is less clutter around you.
  • This will also allow you to be more organized and focused while cooking.
  • If you need to keep items on the kitchen counters because of limited cabinet space then make sure they’re frequently used and essential for food preparation.
  • If you like to store items like keys, mail and wallets on your kitchen counter, make sure everything has a place where it belongs.

Bottom Line: Kitchen counters tend to attract clutter. Keeping them clear will give you more space to prepare meals and enjoy your time in the kitchen.

 

 

Car Hack For Cell Phone Calls

09.19.2017

0600

Materials:

  • Cotton Rope

Tools:

  • Know your knots
  • Scissors

This is a very simple hack and I use it when I put my phone calls on speaker mode. I simply tied two ropes around my car visor where it was tight enough to carry the weight of my cell phone. The ropes still don’t interfere with my visor mirror use as well.

The rope loop on the left side of my visor was tied as it was placed on my visor, then tied off. The rope loop on the right side was actually measured by gauging how much rope I needed to wrap around the visor and then I tied a knot to close off that piece.  I slid it over the visor and because it was a tight squeeze, I knew the knot would naturally tighten more as I was trying to stretch the rope accordingly. I wanted this lop to be tight because it would carry more weight compared to the other one.

The right rope loops is tight enough to hold my cell phone in place in a vertical position. Sometimes I’ll write down my directions if I know I’m going somewhere, where I know I won’t get good reception and place the paper behind the left rope loop. These are good for lists too (ie. grocery lists, errand stop offs, to-do lists, etc).

If I’m driving long distances and I need to swing my visor out to block out the sun from the driver’s side window, I’ll usually slide the phone in on the other side of the visor. It will still hold it in place and technically, the microphone will be even closer to hear and speak into. If you do use this method, just remember to not swing the visor too aggressively. If you do need to use your visor for a short time, keep in mind which side of the visor your phone is on.

So there you have it, my very simple car hack for cell phone speaker mode.

Please don’t text while driving.

DSC_6497

 

DSC_6495DSC_6504

Backpack Hacks

08.15.2017

0600

 

With all of my backpacks that I have ever owned, I hack them the exact same way as I always have. Going back as far as middle school, I always had to hack my backpacks. It was my way of customizing my carrier to my exact needs and over time I would edit it as my needs changed. Within each compartment I always created some type of hanging or attachment mechanism to hang my water bottles, extra bags within the compartments or hang something I needed access to immediately. most of the time I hung items that I needed access to so that those items weren’t at the bottom of my bag, where I had to go digging around to look for them.

 

Front of the backpack

  • I always attach extra reflectors so that in low light, vehicles or any type of light can bounce off of my backpack and I can be visible. These reflecting straps are for bikers, but I took two of the straps and weaved them through my exisitng strap set up.

DSC_4842

  • For all of my zippers that open to significant compartments, I always sew a section of the zipper, so it limits the access to that compartment to only one direction of movement for the zipper. I prefer to only have access in one direction for the zipper movement so it’s easier to watch over and maintain. I also attach metal rings right below the point of the sewing block (through the exposed zipper tape) so that I can use this ring to lock my carabiners from the outside but to also hang items on the inside of the bag.

 

 

DSC_6510

DSC_6526

 

 

  • On the inside, I hook extra interior metal rings with carabiners to the exterior rings that are popping through the tape so I can hang items on the inside. I’ll hang my water bottle from these interior rings (when my external water bottle pocket has my coffee tumbler in it) or small bags so I can keep items separated in the same compartment. These interior rings are there for anything that needs to be hanged or utilized.

 

00-eas.260.2007_010_01DSC_6511

DSC_6513

 

Sides of the backpack

  • I also sew blocking for my smaller compartments and create a locking system for these pockets as well. For the smaller pockets, it really just depends how and where you want to secure the pocket. I chose to insert an extra ring so that I could attach an extra carabiner to it and lock the zipper with it.

 

 

DSC_6533DSC_6534

 

  • For my external water bottle pocket, I usually take one of the extra backpack straps (that I trimmed off)  to create a safety strap for the external water bottle pocket so that it can hold taller water bottles more securely. There have been a few incidents where my external water  bottle pocket wasn’t deep enough and due to the fact that I had so much stuff in my backpack, my water bottle managed to get squeezed out of the pocket.

DSC_6518

Back of the backpack

  • I usually trim the extra strap slack that comes with the backpack straps. I don’t like any loose hanging straps so I will measure how high I want to carry my backpack and trip, then hem the straps accordingly.
  • For my backpack straps, I like to keep my smaller items very close to me. So I will attach some type of pocket (large enough to fit my “wallet” items and my cell phone) to the front. This backpack didn’t come with a pocket for those types of intimate items.

DSC_6538DSC_6537DSC_6540

 

  • I also ALWAYS, ALWAYS attach an extra carabiner to the other strap, so I can hook my keys onto my strap quickly.

 

DSC_6531 - Copy.JPG

 

So there you have it, those are the hacks I made for this backpack. This is my day to day back pack, so I’ll run to the store or go hiking with it. I do have another hiking backpack that’s a 65 gallon capacity for traveling and I’ve hacked that accordingly as well. Hopefully you may see a hack i described here that you would like to use on your own backpacks or carrying bags that you may want to use.

 

Cooking And Serving Preparation Hacks

07.18.2017

0600

Quick, easy and simple are always my goals when I do any type of task. If I can hack a procedure to simplify steps in any task, then I will. I find more value and satisfaction in saving time and energy when I do tasks. I’m simply not the type to make extravagant dinners or parties. There are always ways to simplify life and that is always a goal in life for me. My personal hacks might cut out one extra step but one less step is still saving time.

Cooking Preparation Hacks

When you’re in a hurry, and you need to eat or prepare food fast, here are some hacks that I use so I can speed up the preparation process.

  • Using a spoon to scoop and round produce or vegetable that fits in the palm of your hands
    • Hard boiled eggs, avocados, kiwis or any other small round produce that will fit in the palm of your hand

DSC_5655DSC_5656DSC_5657DSC_5659

DSC_5665DSC_5668DSC_5672DSC_5675DSC_5679DSC_5680

 

    • Dicing or Cutting on a cutting board
      • To change the direction of the cuts, rotate the cutting board or move your own position towards the board. Don’t move the produce on the cutting board.

 

DSC_5698DSC_5699

 

  • Sliding produce to pan from cutting board
    • Once done with dicing or slicing your vegetables on the cutting board, use the opposite side of the knife blade to slide the chopped items the pot or larger container. This way, you don’t ruin the blade of the knife.

 

DSC_5703

 

  • Cutting oranges
    • Cut oranges in half by cutting the first slice horizontally, and then create the divides from there. That way you create small triangles when you peel bech each individual slice.

 

DSC_5685DSC_5686DSC_5689

 

  • When cutting long vegetables
    • When cutting long vegetables, always cut the produce in half for each cut, so it takes less cuts to reach the desired length.
    • When I cut carrots it’s in a similar manner. I cut them in half and then split the halves into halves. I pretty much use this method for most any vegetable I cut.

 

DSC_5691DSC_5693DSC_5694DSC_5695

 

  • Extracting garlic
    • Gently extract garlic out of its skin by using the side of a large knife and simply pressing on it, on the counter. The garlic will loosen from its skin and simply cutting off the end of the garlic will release the skin from the garlic meat

 

DSC_5705DSC_5707

Serving Food Hacks

A lot of my workday consists of time management so my hacks really stem from my desire to save time.

  1. Serving Food
    1. I use glass tupperware bowls when I eat, that way, if I have leftover food, I throw on the tupperware lid and I’ll have leftovers for a snack or for another meal. Also, there are less dishes to wash after the meal.
    2. Mugs with handles are our friends for foods that have temperature issues such as hot soups, or cold ice cream.

DSC_5880DSC_6170

 

Creating Sliding Drawers

06.20.2017

0600

Materials:

  1. One sheet of brown peg board
  2. KOMPLEMENT drawer handles from IKEA
  3. Bulk rope from Jo-Ann Fabric and Craft Store
  4. Extra nuts and bolts to secure the handles to the peg boards

 

DSC_6243Drawers:

I first had to measure the width of my cabinet openings, due to the fact that they were old up-cycled cabinets from when we had first moved into this house. The cabinet drawer opening measured 12″ wide and 24″ deep. Ideally, most new cabinet installments would add a nice overall look and clean up the space a bit, but the way new sliding drawers are built, the thickness of the wood would eat up a lot of the width opening. This is why I decided to make some generic sliding drawers.

I measured out the dimensions of 11-1/2″ wide and 20″deep on the peg board, and I had just enough board to make up three drawers. Because the peg board came with pre-drilled holes, it was easy to guesstimate where the handles would be located, and not all of the handles would necessarily be centered. Also, the screws that came with the handles accessories package were designed to fit a 3/4″ thick board, but the peg board was only 1/4″ thick. this is why I had to gather a few extra nuts to infill the space between the original handle screw and the end of the handle itself.

Once I cut the boards to the right size to fit the openings, I placed the handles where I wanted them to be located and attached the nuts and screws accordingly. Because I wanted these drawers to slide, I went to a local fabric store and bought some thick bulk rope. I used this rope to wrap around the long sides of the drawers so that they would slide out easier. The rope also evidently contained the items sitting on top. You can also contain the items that would sit on top of these drawers by screwing a thin piece of wood onto the top of the drawer so  you have a more secure way of holding your items.

Because the motion of the drawers is more of a pull-out motion when in use, I was more concerned about the items falling off in the back of the drawer when the drawer was pulled outward. Once the rope was tied on, I placed my items inside my small rectangular, fabric containers.

 

DSC_5643DSC_5644

DSC_5645

Drawer Guides:

I nailed down 12″(L) x 1/4″(W) x 3/4″(D) wooden pieces on each side of the drawers, inside the cabinet, as guides for the drawers. I chose to use a 12″(L) because the depth of the cabinet is 24″. I braced the guides up against the front of the cabinet, in which these guides will help slide out the drawers along a smoother line.

Conclusion:

These drawers are very simple sliding drawers made form material found around the house. There are a number of designs to secure drawer guides in place, and this one was a very simple design. If I had used a 1/4″ bottom for the drawers, I would have secured a different drawer guide design underneath the drawer. I genuinely like the fact that these drawers slide on the rope and it makes virtually no sound when pulled out and pushed back in. It doesn’t’ scratch the surface of the cabinet shelves and it’s simple enough to take apart if I no longer have the need for this design. Maybe this design will work for you, in other areas of your home. I hope this post might have helped brainstorm some ideas.

DSC_6253

 

 

Upcycling Shelves

06.13.2017

0600

Materials:

Tools:

  • Miter saw
  • Electric drill  and drill bits

So my family usually keeps leftover material from previous house projects or from items that were disassembled. A lot of the time wood planks are left over. These vary in sizes so I try to upcycle them around the house. My father had a book shelf a while back and it had two 42″ shelves that were 1″ thick and two 72″ shelves that were one inch thick.

I  knew those shelves could be used elsewhere in the house so I designated the shorter shelves for the upstairs kitchenette and created shelves with the other two longer pieces, in two other separate areas of the house.

I bought four grey Everbilt 10 in. x 8 in. Gray Medium Duty Shelf Bracket for the kitchenette and I bought two white Everbilt 9.75 in. x 7.75 in. White Elegant Shelf Bracket for the shelf in the bedroom. The shelf in the hallway will be mounted up with two wood 2x4s on each side.

For the kitchenette, I located the studs by knocking on the wall (you can also use magnets to locate the nails located in the studs as well) and since I wanted the top shelf to have at least 16″ of space from the shelf to the ceiling, I had to create two marks that marked both the top and bottom of the top shelf. I then measured another 11″ below the bottom line of the top shelf and made two marks for the bottom shelf. I wanted to leave at least 22″ above the countertop so there was enough room for using the countertop surface.

Because the shorter shelves didn’t reach across the wall of the kitchenette, I offset the shelves to make the weight of the items on the wall even. I measured the distance between the studs for each shelf, and transferred that onto each shelf. It’s easier to attach the shelf brackets to the shelves first, and then attach them to the wall. My studs were 30″ (on center) between each, so I knew to leave half an inch from the edge of each shelf edge and then measure inwards 30″ to mark the next center of the next bracket.

Once I attached the brackets to the shelves, I had to pre-drill the holes for the screws in the studs on the wall. If you screw in the top screw on the bracket closest to the wall (where the blue arrow is pointing to), and then place a  small level on top (where the violet arrow is pointing), then you can swing the other bracket up (where the maroon arrow is pointing), until the level shows that the shelf is at an even plane.  This seemed to be the easiest way for me to attach the shelves and also double checking the correct balance of the shelves.

DSC_6193

 

DSC_5564

DSC_5571

For the shelf under the window, I first located where my studs were and made sure I cleared the electrical outlet. Ideally, I would have place a bracket where that electrical outlet is located, but there wasn’t any room. I wanted the height for this shelf to have an 8″ clearance, so I simply measured 8 inches below the existing shelf and marked two lines for the top and bottom of the shelf. For this shelf I trimmed the edges so it would fit the width of this space better. I also drilled a hole above where the outlet was located, so there would be access to the outlet.  I attached the brackets to the shelf based on the width of my studs. For this shelf, I literally held up the shelf with one hand, and traced the inside of the drill hole locations with the other. As long as I continued to press the shelf against the wall, it didn’t move much. I did this because I wanted to mark where the drill holes were and also to pinpoint the center of the holes. There wasn’t room to swing the shelf up to level it out, (such as the kitchenette example), so when I placed the level on the shelf, I only had to adjust the shelf slightly to even it out. Once the first screw was placed, it pretty much held up it’s own weight until I could drill in the last three screws.

DSC_5629

The shelf in the hallway was mounted with a different method. I actually had to cut this original shelf piece in half. It was the other 72″ long shelf piece, and by placing each of the halves next to one another, I created a  18-1/2″ depth shelf. I first located the studs in each wall and measured 11″ height clearance for the space above this shelf.  The width of the space was so small, that putting up brackets would have taken up too much room. I pre drilled the holes in the 2x4s based on the width of my studs I had located. Always remember which 2×4 belongs on which wall, so you’re not accidentally drilling extra holes. After that, I placed each piece on the new mount and held the shelf pieces in place with finishing nails.

DSC_5634

 

This was just one of my upcycling projects using materials I found in the garage. If you can find materials that are still in fairly good shape, I would try to upcycle it for a useful piece of item that you may need. It’s cheaper than going out to buy brand new material- especially since you’ll still have your extra supply of material laying around.  I like to use up what I buy, it’s habit of mine and it’s saved me money over the years. I hope this post helped jog some ideas for you!

Revisiting Design Hacks

02.28.2017

1200

Design is ever changing. It evolves, grows up, mutates and sometimes dies. As someone who consistently designs functions for different objects, and re-designs those function issues, I’ll come across methods that are better for the product itself. It never stops. As people grow in the sense of mentally, physically, emotionally, we will change our habits and routines. Sometimes it’s based on a simple scheduling issue, sometimes it’s a physical disability that we all the sudden need to integrate into our routines. Maybe our routines change due to new people coming into our lives and that includes children and adults.

For these many reasons, I re-visit many of my design ideas. I re-visit them as often as I can.  know that I’m designing from my own perspective and from what I know, but I also know that there’s a whole different world out there who may not have the same resources or the same materials readily available.

So let us take a walk down memory lane… and we’ll re-visit some of my old blog posts and some updates I have for this one.

In addition to my Car Hacks blog post, I had to add one small change. I actually learned this from my mom, but since it made sense, I started doing this as well. It’s very simple. IF you have the room, it’s easy to organize you’re items using boxes in your truck. I have two different sized boxes so that when I go grocery shopping, I can place my bulk liquid items in the smaller box and I know that they won’t spill on the drive home. I use the bigger box for larger bulk items and even for my take out food containers. It’s nice that the smaller box fits well inside of the larger box and I can limit the movement of the objects when in motion.

dsc_5388dsc_5391dsc_5392

For the front of the car, I actually looped an S-Hook through the rope that I exists from that original Car Hacks post. The S-Hook allows me to hang my purse when I need to as well as smaller bags that may roll around. When I brought my lunch to work, I would hang my bag from this hook, and (thank goodness for the consistency of gravity) my food never spilled or toppled over. I really like this hack.

dsc_5393dsc_5395

At my work desk, which I wrote here, Work Desk Essentials, I now changed items out and the final setup is a jar of bulk green tea, and a jar of raw almonds and dried cranberries. I have one extra jar in case I run to a grocery store to grab some hot food from the hot foods bar. My coffee tumbler is by Contigo and it has a 20 oz capacity.

DSC_4835

On my desk… I now keep a set of utensils, tea infuser, lip balm and hair bracket in a bag. In the other bag I keep my earphones and phone charger together too. I carry  a handkerchief now and store it along with my napkin. I use my leftover Aquaphor to help me moisturize my skin during the winter.

dsc_4837

In my shoulder bag, I now carry a pair of chopsticks and a handkerchief along with my set of utensils and cloth napkin. Although when I air travel, I will replace the metal utensils for my bamboo set (knife, fork, spoon). My coffee tumbler is also by Contigo who has an excellent spill proof lock.

dsc_4838

These are only a few design hacks that I keep revisiting. As a designer, your perception of a good design always changes and it take a few trial designs to settle one final design. also, as life moves on and time marches on, your routines and needs will change- so your designs will have to adapt.

Christmas Ornaments Hack

12.06.2016
0800

Materials:

  • Keychains
  • Extra thread or string

Tools:

  • Sewing Kit

So when I decluttered my sentimental possessions, I pulled out the few keychains I had leftover and decided to turn them into Christmas ornaments. I’ve done this before for other years as I was slowly decluttering my sentimental possessions, but these are the last keychains I own. So with the last set of keychains, I thought I’d show you how I upcycle these items.

I have a habit of writing the year I received each ornament on the ornament somewhere. I actually didn’t start doing this up until about a decade ago. For the ornaments that came before then, I literally reserved a random Saturday and recalled ALL of the years that each ornament came into our lives. The years help me remember a time in my life, or what was happening during that year, and even what was going on around the world. Keychains hold the same sentimental value for me that ornaments do. I used to collect keychains, but that goal was short lived being that I realized that I didn’t have enough zippers to attach them to. Also, with the certain keychains, they get in the way of the function of the bag I’m using or it just becomes an extra piece on my bag that will inevitably get caught in something as I’m walking or moving around and rip off. I also don’t use keychains for my keys.

I know that sounds strange, but as I got older, and I had to be responsible for more keys to more places and items. I prefered to not weigh down my keys with so much excess weight. (It’s also annoying when I’m driving and I have a large chunk of metal just hanging and swinging from the car ignition). I like my leg room. I also don’t want to hang to much weight from the ignition in case it ruins the tumblers in the ignition over time.

Some of my keychains are from my own purchases and the rest were given to me. For this post, my last keychains that I used (from left to right), a pewter cat keychain from my brother when were first took in an older feral cat who was a variation of greys. She was a sweet and fat cat. She left us after four years or so, never saw her again.

The next keychain I bought was when I went to Vietnam in the summer of 1998. This was my first trip to Vietnam and as a teen, it changed my view of the world and I knew how blessed and lucky I was to be born a United States citizen. My father and I had a stopover in South Korea after 12 hours in the air. I played soccer for a very long time throughout my childhood, and I continued to follow different clubs and leagues  from around the world. Although this keychain said “2002 World Cup Korea”, it was the first World Cup to be held in Asia, the first to be held on a continent other than Europe or the Americas, the last World Cup during which the golden goal rule was in force and the only World Cup to be jointly hosted by more than one nation. It was a landmark world cup tournament and it was exciting to have Japan and Korea join together to co-host such a celebrated event. I actually bought this keychain at the airport where we stopped over, it wasn’t anything big, but it was the first marketing item I had seen for the 2002 World Cup. The United States hadn’t even released marketing for that World Cup yet.

The third keychain is a beetle, yup a beetle. My father had mailed me the keychain from Vietnam for my sixteenth birthday. It came with a card. Although it was pretty unconventional, the beetle was actually a beautiful specimen. I don’t have a fear of many things at all, and I actually understood why my dad had mailed it to me. He was purely focused on the the colors of the beetle and how nature could create such an interesting yet iridescent bug. I kept that keychain on my backpack throughout high school. It was either a great conversation starter, or I simply received strange looks from passer byers.

The last keychain is from my mother when she went to the Grand Canyon. I’ve actually never been there but she brought this back for me. It was a fun trip for her with her friends and I thought that I should finally add it to this project.

dsc_5083

Using pliers, I unhinged the chains that attached the metal rings to the metal chains. I keep all metal rings from items that I manipulate, because rings are very versatile when creating my DIY projects.

dsc_5085

I rummaged around my mother’s sewing kit (good thing she keeps her thread samples from old clothes) and found some thick thread to use for these ornaments. I chose thread that was dark, so that it would blend in with the fake Christmas tree branches.

dsc_5086

Because keychains come with a built-in loop for the metal chains, I simply created large loops so they could be placed on the branches easier. I carve or write the year of each ornament on the it before I put it away.

dsc_5087

I actually haven’t bought new ornaments in thirteen years. I’ve been creating ornaments from small memorabilia that I’ve owned for a long time. Each year, I go digging through the decluttering process (I told you it takes time to go through everything), and I’ll create one or two more ornaments each year.

With making my own ornaments, I actually donated quite a few sets of nice ornaments to different causes. By keeping my ornament count low, I’m not unnecessarily hoarding a bunch of extra ornaments. My Christmas tree is only five feet tall, and it’s actually the same Christmas tree my family has had for the past twenty-five years. I have just enough to cover it.

I hope this might give you some inspiration to make ornaments from your own keychain memories. Now, go grab pliers, thread and all the keychains you’ve got! Because who doesn’t want a iridescent beetle hanging next to Christmas Snoopy?  And if you carve the date into your ornament and get cut, blame the Electoral College. It’s always their fault.

Here are some other ideas for homemade ornaments. They’re eco-friendly and easy to make. Check these out from some other sustainable bloggers…