Upcycling A Shoe Organizer

10.02.2018

0600

Materials:

  • One over the door shoe organizer
  • X-acto blade
  • Cutting mat (or cardboard, plywood, some type of surface you’re willing to cut into and can damage just a little bit)
  • 4 Safety Pins

Tools:

  • Sewing machine
  • Sewing Kit

 

DSC_0326

So I’ve owned an over the door shoe organizer for awhile. I didn’t use it a lot because I didn’t have many pairs of shoes. When I started to declutter my life and minimize my possessions, I kept it because I still liked the design and I knew I could use the material to create something else.

Because I’m not a fan of keeping items out in the open, much less hanging them out in the open, I knew I wanted to upcycle this shoe organizer into smaller organizers. I personally like things to be put away. My minimalist, zero waste lifestyle lends my living space towards clean surfaces and minimal decor. So I wanted to create two smaller organizers which could be hung up in the closets.

The goal was to create two separate organizers that were each 2 pockets across by 3 pockets vertically on each side of the smaller organizer. So each side of the hanger would hold a grid of pockets that was 2 pockets across by 3 pockets vertical.

First I cut the shoe organizer in half.

DSC_0270-2_Shoe Organizer Diagram

 

I then folded each organizer in half (vertically) to find out where I wanted to locate the hangers.

DSC_0272-2

I then placed each hanger on each organizer, as I wanted them to sit. I wanted to place each hanger so that the top bars of the hangers would still be protected by the fabric. I only wanted the neck of the hanger to stick up and out of the fabric so the fabric organizer would sit higher on the hanger. The hanger would have more control of the overall weight of the items inside each pocket when it was hung up.

DSC_0275-2

I placed the hangers where I wanted each hanger to be located on each organizer and then marked the location of the bottom bar. I needed to make a mark at those locations, because that’s where the bottom of the openings for the hangers would pass through.

DSC_0273-2

Using the X-acto blade, on the folded edge, I carefully cut a straight line of where the hanger would stick out. I cut along the mid line of the fabric grid pattern and only cut enough for the hanger to fit. You can sew the edges of these openings if you want a clean and sturdy structure around the edge of the opening. I suggest using a running stitch to do that, if you choose to.

Types of Stiches

DSC_0279-2DSC_0277-2

Using the bottom of opening as a location marker, I sewed both sides of each organizer together. I wanted the backs folded and sewed to one another to create a more sturdy central structure. I sewed from the bottom of each opening, around and up to the other side, making sure I stopped at the other marker.

DSC_0276-2 - Copy

The idea was that I wanted to seal the two flaps of pockets to each other, but leave enough room for the hanger to slide in and out of the design.

DSC_0282

Once the hanger is slid into place, the flap should allow the user to remove the hanger if necessary. I used a hem stitch to secure the top of the opening on the folded edge (see below). I did this because I know that the weight of the the organizer will tear the opening over time. I wanted to secure the top of the opening and reinforce the structure.

DSC_0313-2

I stitched an extra line above the hanger (towards the folded side of each hanger), but underneath the pocket flaps, to reinforce extra support for the organizer.

Using a safety pin, I pinned the opened edge approximately where the top of the hanger was located on the opposite side. This way, the hanger can be removed easily when it comes time to wash it or put it away. The safety pin will act as a closing mechanism to hold the hanger in place.

 

DSC_0314-2DSC_0320-2

So there you have it, this is how I upcycled my over the door shoe organizer. Although, I technically only created smaller shoe organizers, I had the idea that I could use these smaller organizer to store smaller items such as jewelry, scarfs, socks, etc., that can get lost in a closet. Basically, anything you might store in the top drawer of your dresser, you might use this for. I don’t use a dresser, so this product can be useful for me. Right now I actually use a few of the pockets to keep some running and workout items organized. I like this design for the fact that it’s double sided and it can be folded up and put away if it’s not being used. Hopefully this post might spark some organizational ideas for your life.

Until next time!

DSC_0329

 

 

 

Advertisements

Upcycling Denim Jeans

01.30.2018

0600

Materials:

  • One pair of denim jeans

Tools:

  • Sewing machine
  • Sewing Kit

So recently I started going auditing my traveling items such as my bath bag, travel accessories as well as my sport bags. I wanted to find 3 pieces of clothing to donate, but I also noticed that my bath bag wasn’t containing my bath items comfortably.

So I had the choice to go buy/find a new bath bag or find another solution. Out of the items I decided to donate, I found a tank top, sweater and a pair of jeans. Denim is one of my favorite materials to work with. I love upcycling denim into new items. The idea of donating the pair of jeans wasn’t exactly what I thought I would do, so I decided to make a stand up bath bag for myself, or at least a few stand up bags.

I’ve owned bath bags before, but the material was with a polyester or nylon blend. Over time, my bath bags would have soap or toothpaste residue stains. I figured that with a denim bath bag, I could simply throw it into the washing machine and it would clean easily.

DSC_8685

I divided each leg in half by folding it in half. I then cut the legs off from the pair of jeans and then divided each piece in half.

DSC_8695

I turned each of them inside out and designated the wider end of the pieces as the bottom of the bag and the smaller ends as the top of the bag.  I folded the top of the bags down to create the drawstring tube. This is where I wanted to install the drawstring later.

DSC_8697 - Copy

I hemmed the bottoms of the bags by simply sewing a sew line across the bottom. I then sewed the drawstring tube. I measured 2″x2″ squares on the corners on bottom.

I marked these white dots on BOTH SIDES OF THE BAG, near the bottom section of the bag. These white dots will be used as guides of where you will sew in the next step.

DSC_8699 - Copy

I then flipped the bag upside down, and so that the right side seam was facing up. I then folded the bottom of the bag to create a diamond shape. You should be able to locate all four dots that were created in the last step, when molding the diamond shape.

DSC_8704 - Copy

The dots are guides to sew where you will sew horizontally across the diamond. After sewing the two lines, the diamond should look like this.

DSC_8712DSC_8718

Since I was initially thinking of making a new bath bag, I wanted to sew a small pocket inside of that bag. I had this extra pocket left over from my Handmade Handkerchiefs project, so I added it on the inside. To find the opposing edges of the box, you can locate it by finding the perpendicular lines of the top and bottom hemmed lines.

DSC_8715 - Copy

If you want to make a small pocket inside, you can sew a piece of material to the inside of the bag, as long as you leave to top of the material open.

In this case, because the pocket was more than half of the height of the bag, I placed the pocket towards the bottom of the bag. I also knew that I would be folding the bag down when in use, so placing it towards the bottom gave me room for the top to be folded down.

DSC_8719

Once I pulled the drawstrings through the bags, this is what they looked like. They stand up pretty well, and I can fold them down to create a top frame for the boxes.

DSC_8721

This is what my bath bag looks like now.

DSC_8795

I like the fact that I can simply fold my bag down and be able to access everything I need inside. I also have the habit of attaching a ring to the interior of any bag. So I attached a metal ring to the inside seam of the bag, because I wanted to hang small bath items for easy access.

So there you have it. This was my solution to my travel bath bag issue. I genuinely love denim and to make these stand up drawstring bags with this material is one of my favorite kinds of sewing projects that I like to get involved in.

I used my other bags for some camera gear and for another bag I use for traveling. The denim creates a nice thickness for the bottom of these bags, which is why I like to use them for electronics.

DSC_8794

As a bonus…

I made a bag out of the top part of my denim jeans. I simply flipped the top inside out and hemmed the pant leg openings.  Due to the nature of how the jeans were cut and sewed, I folded the outer edges of the jeans inward when I hemmed them.

DSC_9368DSC_9369

I then sewed a zipper to the top opening of the jeans using sewing pins to hold the zipper in place and then sewing it to my pants. I used the same sewing steps to attach the zipper as to when I  Created Slim Hanging Organizers.

DSC_9371

Since my zipper wasn’t quite long enough for the length of the jeans, I closed off the jeans by sewing the top together.

DSC_9372

DSC_9373

I used an extra tie to create the handles of this bag. This was a simple choice but some people may prefer to use a belt or something more to their taste. I chose the tie because I wanted to be able to throw everything into the washing machine.

DSC_9375DSC_9381

And as always, I attached a metal ring to my zipper for a slightly easier access.

I use this bag to hold some smaller items that need a bit of cushion like camera gear or smaller electronics.

DSC_9383