Upcycling Denim Jeans

01.30.2018

0600

Materials:

  • One pair of denim jeans

Tools:

  • Sewing machine
  • Sewing Kit

So recently I started going auditing my traveling items such as my bath bag, travel accessories as well as my sport bags. I wanted to find 3 pieces of clothing to donate, but I also noticed that my bath bag wasn’t containing my bath items comfortably.

So I had the choice to go buy/find a new bath bag or find another solution. Out of the items I decided to donate, I found a tank top, sweater and a pair of jeans. Denim is one of my favorite materials to work with. I love upcycling denim into new items. The idea of donating the pair of jeans wasn’t exactly what I thought I would do, so I decided to make a stand up bath bag for myself, or at least a few stand up bags.

I’ve owned bath bags before, but the material was with a polyester or nylon blend. Over time, my bath bags would have soap or toothpaste residue stains. I figured that with a denim bath bag, I could simply throw it into the washing machine and it would clean easily.

DSC_8685

I divided each leg in half by folding it in half. I then cut the legs off from the pair of jeans and then divided each piece in half.

DSC_8695

I turned each of them inside out and designated the wider end of the pieces as the bottom of the bag and the smaller ends as the top of the bag.  I folded the top of the bags down to create the drawstring tube. This is where I wanted to install the drawstring later.

DSC_8697 - Copy

I hemmed the bottoms of the bags by simply sewing a sew line across the bottom. I then sewed the drawstring tube. I measured 2″x2″ squares on the corners on bottom.

I marked these white dots on BOTH SIDES OF THE BAG, near the bottom section of the bag. These white dots will be used as guides of where you will sew in the next step.

DSC_8699 - Copy

I then flipped the bag upside down, and so that the right side seam was facing up. I then folded the bottom of the bag to create a diamond shape. You should be able to locate all four dots that were created in the last step, when molding the diamond shape.

DSC_8704 - Copy

The dots are guides to sew where you will sew horizontally across the diamond. After sewing the two lines, the diamond should look like this.

DSC_8712DSC_8718

Since I was initially thinking of making a new bath bag, I wanted to sew a small pocket inside of that bag. I had this extra pocket left over from my Handmade Handkerchiefs project, so I added it on the inside. To find the opposing edges of the box, you can locate it by finding the perpendicular lines of the top and bottom hemmed lines.

DSC_8715 - Copy

If you want to make a small pocket inside, you can sew a piece of material to the inside of the bag, as long as you leave to top of the material open.

In this case, because the pocket was more than half of the height of the bag, I placed the pocket towards the bottom of the bag. I also knew that I would be folding the bag down when in use, so placing it towards the bottom gave me room for the top to be folded down.

DSC_8719

Once I pulled the drawstrings through the bags, this is what they looked like. They stand up pretty well, and I can fold them down to create a top frame for the boxes.

DSC_8721

This is what my bath bag looks like now.

DSC_8795

I like the fact that I can simply fold my bag down and be able to access everything I need inside. I also have the habit of attaching a ring to the interior of any bag. So I attached a metal ring to the inside seam of the bag, because I wanted to hang small bath items for easy access.

So there you have it. This was my solution to my travel bath bag issue. I genuinely love denim and to make these stand up drawstring bags with this material is one of my favorite kinds of sewing projects that I like to get involved in.

I used my other bags for some camera gear and for another bag I use for traveling. The denim creates a nice thickness for the bottom of these bags, which is why I like to use them for electronics.

DSC_8794

As a bonus…

I made a bag out of the top part of my denim jeans. I simply flipped the top inside out and hemmed the pant leg openings.  Due to the nature of how the jeans were cut and sewed, I folded the outer edges of the jeans inward when I hemmed them.

DSC_9368DSC_9369

I then sewed a zipper to the top opening of the jeans using sewing pins to hold the zipper in place and then sewing it to my pants. I used the same sewing steps to attach the zipper as to when I  Created Slim Hanging Organizers.

DSC_9371

Since my zipper wasn’t quite long enough for the length of the jeans, I closed off the jeans by sewing the top together.

DSC_9372

DSC_9373

I used an extra tie to create the handles of this bag. This was a simple choice but some people may prefer to use a belt or something more to their taste. I chose the tie because I wanted to be able to throw everything into the washing machine.

DSC_9375DSC_9381

And as always, I attached a metal ring to my zipper for a slightly easier access.

I use this bag to hold some smaller items that need a bit of cushion like camera gear or smaller electronics.

DSC_9383

 

 

 

Advertisements

Upcycling Sleeves Into Reusable Gift Bags

09.19.2016

0800

Materials:

  • Leftover t-shirt sleeves from the shirts you planned to make into a t-shirt quilt
  • Sewing kit

Tools:

  • Sewing machine

So I started making a T-shirt quilt for my brother and one for my mother. For my brother, I used his old t-shirts and for my mother, I took a few of my childhood t-shirts as well as some of hers, and combined them into her quilt.

After trimming the shirts for the quilts, I had leftover fabric which I sewed into gift bags, however, I ran out of shoelace to use as the drawstrings. These gift bags are for giving away to those who may want them, and I don’t suggest to use these bags for bulk grocery shopping due to the elasticity of the way t-shirts are sewn together. I usually use bedsheets to make the reusable bulk shopping bags because their thread count is higher and it’s a denser assembly. The left over fabric included the t-shirt collars, the sleeves of the shirts and extra fabric from certain shirts which only had print on one side.

dsc_4956

Bags:

I hadn’t figured out what to do with the collar portions, so I set them aside. However, with the pile of sleeves, I thought I would make odd shaped reusable gift bags out of them. I knew that even if I sewed the pairs of sleeves together, the gift bags would be lopsided. Then again, with the odd shape to the gift bags, maybe it would be easier to hide the shape of the gift inside. So I basically paired up the sleeves and sewed the wide ends together, and closed off one of the open ends.

dsc_4967

Once I finished sewing the gift bags made from the sleeves, I ended up with pentagon shaped gift bags. These bags were not expected but they didn’t turn out too bad, I actually like the odd shape that they ended up becoming. I’ve never used this type of fabric for this kind of use, so this was all a new journey for me. However, if you don’t have shoelaces available or have extra t-shirts lying around, you can make your own drawstrings to use.

dsc_4968

dsc_4955

Drawstring for the bags:

Since I ran out of the shoelace that I usually use, I had to figure out a way to still create a drawstring for these bags. So I took a sleeve piece and started creating a cut line that spiraled around the sleeve. I started at the seam edge of the sleeve (which usually is located on the bottom of the sleeve), and started cutting upwards. I started here because as I spiraled around the sleeve, I knew I would cut through the thread that held the shirt sleeve together and by starting at the seam, it would look like a cleaner cut.  I wanted the width of each string to be about 1/2″ so I just continued to cut around around the sleeve, keeping in mind the width of the fabric until I ran out of sleeve to cut . With t-shirt fabric, when the fabric is cut, it tends to curl in on itself so that was the goal behind choosing the 1/2″ width. The fabric piece would curl in just enough to fit through the sleeve cuff to create a drawstring.

dsc_4960

dsc_4961

(sorry for the blurry picture, but you get the idea)

Final Product:

So with the different parts of the t-shirts and long sleeve shirt I had used to create the t-shirt quilts. I ended up with a few long and tall gift bags, a bunch of square/rectangular bags and a handful of pentagon shaped gift bags. I actually really like the pentagon shaped bags, I didn’t know they’d turn out like that. It was a nice surprise after all the work was done. I hope this post might inspire or help those who might embark on the same journey.

dsc_4963

dsc_4968

If you want to check out some other options for eco-friendly gift wrapping, check out these gift wrapping ideas from these other bloggers: