Backpack Hacks

08.15.2017

0600

With all of my backpacks that I have ever owned, I hack them the exact same way as I always have. Going back as far as middle school, I always had to hack my backpacks. It was my way of customizing my carrier to my exact needs and over time I would edit it as my needs changed. Within each compartment I always created some type of hanging or attachment mechanism to hang my water bottles, extra bags within the compartments or hang something I needed access to immediately. most of the time I hung items that I needed access to so that those items weren’t at the bottom of my bag, where I had to go digging around to look for them.

Front of the backpack

  • I always attach extra reflectors so that in low light, vehicles or any type of light can bounce off of my backpack and I can be visible. These reflecting straps are for bikers, but I took two of the straps and weaved them through my exisitng strap set up.
DSC_4842
  • For all of my zippers that open to significant compartments, I always sew a section of the zipper, so it limits the access to that compartment to only one direction of movement for the zipper. I prefer to only have access in one direction for the zipper movement so it’s easier to watch over and maintain. I also attach metal rings right below the point of the sewing block (through the exposed zipper tape) so that I can use this ring to lock my carabiners from the outside but to also hang items on the inside of the bag.
DSC_6510
DSC_6526
  • On the inside, I hook extra interior metal rings with carabiners to the exterior rings that are popping through the tape so I can hang items on the inside. I’ll hang my water bottle from these interior rings (when my external water bottle pocket has my coffee tumbler in it) or small bags so I can keep items separated in the same compartment. These interior rings are there for anything that needs to be hanged or utilized.
00-eas.260.2007_010_01
DSC_6511
DSC_6513

Sides of the backpack

  • I also sew blocking for my smaller compartments and create a locking system for these pockets as well. For the smaller pockets, it really just depends how and where you want to secure the pocket. I chose to insert an extra ring so that I could attach an extra carabiner to it and lock the zipper with it.
DSC_6533
DSC_6534
  • For my external water bottle pocket, I usually take one of the extra backpack straps (that I trimmed off)  to create a safety strap for the external water bottle pocket so that it can hold taller water bottles more securely. There have been a few incidents where my external water  bottle pocket wasn’t deep enough and due to the fact that I had so much stuff in my backpack, my water bottle managed to get squeezed out of the pocket.
DSC_6518

Back of the backpack

  • I usually trim the extra strap slack that comes with the backpack straps. I don’t like any loose hanging straps so I will measure how high I want to carry my backpack and trip, then hem the straps accordingly.
  • For my backpack straps, I like to keep my smaller items very close to me. So I will attach some type of pocket (large enough to fit my “wallet” items and my cell phone) to the front. This backpack didn’t come with a pocket for those types of intimate items.
DSC_6538
DSC_6537
DSC_6540
  • I also ALWAYS, ALWAYS attach an extra carabiner to the other strap, so I can hook my keys onto my strap quickly.
DSC_6531 - Copy.JPG

So there you have it, those are the hacks I made for this backpack. This is my day to day back pack, so I’ll run to the store or go hiking with it. I do have another hiking backpack that’s a 65 gallon capacity for traveling and I’ve hacked that accordingly as well. Hopefully you may see a hack i described here that you would like to use on your own backpacks or carrying bags that you may want to use.

My Basic Toolbox

03.23.2016

0830

DSC_3739

I like household fixes, I genuinely do. There’s a sense of accomplishment that goes along with it and a better understanding of how your home functions. Plus, a lot of household repairs are quite simple and easy to get out of the way if you have the right tools and techniques. So I do keep a few tools on hand in my toolbox for this reason, but over the years, I also purged my tool collection. I tend to use a few tools frequently for fixes and I’ll borrow others. I don’t think it’s necessary for me to have an extensive collection in my toolbox due to the fact that I prefer to borrow tools on bigger jobs. Plus, owning more tools means I have to put more effort into maintaining all of my tools. Basically, now my small toolbox includes:

DSC_3742

Level 1:
Exacto blades with blade refills, electrical tape, Teflon (plumbers) tape, a combination lock, 2 old ID cards as putty scrapers, solar calculator

DSC_3740

Level 2:
Pair of trauma shears, long nose pliers, combination pliers, gardening shears, multi bit screwdriver, wind up flashlight, Eklind Ergo-Fold Hex Key Set, DAP Dry Time Indicator Spackling & Nail Hole Filler, biking gloves

DSC_3741

Level 3:
8-Inch pliers wrench, ratcheting adjustable wrench, claw hammer, bike tool kit, masking tape, extension cords, variety of screws and nails, (Denim bag: mini level, compact mirror, measuring tape, laser measure)

My denim bag is the bag I bring to site visits for my job. It’s basically tools I need to map out a floor plan or sketch out a floor plan easily. I’m a big advocator for borrowing tools, being that I think it helps a community in creating a stronger bond and it eases the stress of trying to own every tool out there for every single fix-up job. I do understand that not everyone will hand over their tools to a total stranger, but there are chains such as Cresco Equipment Rental, which is an equipment rental store, that allow you to rent most any equipment you need.

I also keep an eye on tools that may dry up such as the nail hole filler, electrical tape and masking tape. I keep an eye on them due to the fact that I have a tendency to not use an item for a long time and then the product dries up and becomes trash. It’s for that reason as to why I only own a few AAA batteries and only four battery operated items. I’m a believer in owning and buying ONLY WHAT YOU NEED in the quantity that you need it in. With the intention of buying only tools that you need, I also think that investing in a good set of quality tools is essential. Quality over quantity works on all levels. Over estimating your need for items will always lead to more waste and producing trash.

For most household fixes, you can either fix it yourself which means, you’ll go out to buy the part that needs to be fixed (which most likely will come in packaging that will be discarded) or you can hire a contractor to do the job and hope that they take all the trash with them. Hiring someone to do the job may cost more, but I guess that’s the toss up of how you want to produce trash. Unfortunately, either way, trash will be produced. One of the only hopes when it comes to those situations is that you hope your maintenance of the home stands the test of time.

The point of this blog post was not to tell anyone to copy what I own or to give a standard toolbox set, but evoke some thought of how we go about owning tools. My father was a big believer in fixing up our home on his own so as a child, I always saw a massive collection of tools and I had to re-organize my thought process of how I was going to approach tool ownership.

Minimize, minimize, minimize, it’s one of the simplest steps towards a zero waste life.