DIY Makeup Wrap

December 23, 2019December 22, 2019 / Yen-Van Tran / Leave a comment

12.23.19

0600

Materials:

Fabric piece – 28″ x 17″
Ribbon – 38″ long

Tools:

Sewing Kit
Sewing Machine
Ruler
Blue Ink pen (if using a dark fabric) OR Washable crayon

So I wanted some type of organizer for my makeup and my makeup brushes. A lot of the organizers that I found in stores, only organize make up brushes, but I wanted an organizer that I could also organize my makeup pallets as well. I just wanted some type of organizer that could organize multiple beauty products. Since I couldn’t find one, I decided to make it.

I found two pieces of black fabric that’s were 17″X28″. Both pieces of fabric are a cotton blend and are usually used to make dress pants. I knew the fabric would be durable for this project.

First, I hemmed all the edges. Since I hemmed all the edges at 1/2″ in width, and I folded each edge over twice, the final size of the fabric piece was 15″x26″. Essentially, I had used up an inch of fabric on each side.

My makeup brushes averaged a height of 7.5″, so I knew that my makeup wrap would ideally be 8″ high.

I decided that I wanted 4.5″ base, to hold all of the items in place. I folded the bottom of the wrap, up 4.5″ and pinned the fabric together using sewing pins. I then folded my wrap in half, to find the center line. I wanted the right side of the wrap to hold my brushes and the left side of my wrap to hold my makeup palettes, combs, mascara, eyeliner, etc. I wanted my wrap to be able to hold more than just make up brushes.

Using a washable white crayon, I marked off 1″ sections, for my brushes and then divided the other half into two 3″ sections and two 3.5″ sections. Three inches seemed like a good width for makeup palettes, but check the width of your palettes to see if you need a wider section. I wanted the last two sections on the left side to be 3.5″, because I have a feeling that I’ll need slightly larger slots in the future.

In addition to the washable crayon, I also used a blue ink pen to draw guide lines for the slots, so I could sew the lines straight, when using my sewing machine. The blue ink blends in with the black fabric, so it was only visible under the sewing machine light bulb. I also could have used the washable crayon to mark off the guide lines as well.

Usually, when I create any sewing project, I try to end the sewing line, close to the edge of the fabric. It’s easier to create the back stitch when it’s close to the edge of the fabric.

In this case, I started my sewing line near the top of the folded flap, used the back stitch lever to create a back stitch, continued to sew down the guild line, and then ended the line at the bottom edge, with another back stitch as well.

Since the wrap was long, I folded the right side of the wrap inward, so I could still keep the shape of the wrap neat and clean as I fed the fabric through the presser foot and needle of the machine.

I wanted all of the sewing lines to start at the hem line, because I thought it would create a cleaner look for the wrap.

After I finished sewing all of the slot lines, I wanted to create a top flap, that would cover the makeup bristles and ferrules. I simply folded the top edge of my wrap down 3″, and ironed that edge.

I took my ribbon, and I folded it in half. I needed to find the center line of the ribbon, so I can line up with the center line of the last slot on the left side. I wanted my makeup brush wrap to unroll to the right, so I had to attach the ribbon on the left back side. The wide slots on the left also provide a good section to attach the ribbon to.

The location of where I sewed the ribbon was based on the location of the heels of my brushes. The heels of my brushes were close to the middle of the wrap. It was also the location where my ribbon had to wrap around in order to contain the entire wrap securely.

Using a sewing pin, I pinned the ribbon to the wrap, and sewed the ribbon to the back of the last left slot. I wanted a really long ribbon for this makeup brush wrap, because I wanted to be able to wrap the ribbon twice around the entire wrap, if needed.

So this is what the finished product ended up looking like. The bottom picture is what the wrap looks like when it is wrapped up.

DIY Thumb Loops In Sweater Sleeves

November 18, 2019November 25, 2019 / Yen-Van Tran / Leave a comment

11.18.2019

0600

So this blog post is a personal life hack of mine. When I work out, I like to wear sweaters. Now, these sweaters are not always athletic sweaters, but simple sweaters that I buy just to wear on a day-to-day basis. I like to go running in these sweaters because they’re comfortable and warm. However, when I go running with these sweaters, the sleeves tend to run up my arm. I prefer the sweaters to cover my wrist and not bunch up when I’m running. I like the running sweaters that are designed with thumb loops, but they tend to be more expensive as well. Since I love my sweaters that I wear day to day, I decided to create my own thumb loops for my sweaters.

It’s a very simple process to create these thumb loops. First, I laid down my sweater where the sleeve lay flat on the table. I located the center line of the sleeve, and then chose to locate my thumb loop on the bottom half of the sleeve, but on the cuff of the sleeve. I found the center line of the bottom half of the sleeve, and I decided to locate my new thumb loop there.

When I wear my sweaters, my hand falls naturally to my side, in which my thumb faces towards the front of my body. This is why I located the thumb loop on the bottom half of the sleeve.

I wanted my thumb loop to be 1 inch in length and about half an inch from the bottom of the sleeve cuff. Using scissors, I cut a small slit that was 1 inch in length.

For my right sleeve, I used the same process as I did with the left sleeve. I located the center line of the right sleeve, and then located the center of the bottom half of the sleeve. I cut a one inch slit that was half an inch away from the bottom of the sleeve cuff.

I removed my extension table in order for the sleeve to fit underneath the presser foot of the machine. I slid the left cuff over the needle plate and started to sew the edge of the thumb loop. I used a tight zigzag stitch, so the fabric would hold up during washes and use. Since I knew that these thumb loops would go through a bit of wear and tear, I used the back stitch lever to create a strong and permanent attachment at the ends of the thumb loops.

The back stitch lever created the heavy and thicker starting points and end points of the outline of the thumb loops.

I flipped my left sleeve inside out, and continued to outline the other side of this thumb loop. I used the zigzag stitch again and used the back stitch lever so both ends of the opening would have an even reinforcement, of the thumb loop.

When I turned my sweater inside out, the thumb loops were finally finished being created. I use this hack on both of my sweaters, so now the sleeves won’t run up my arms when I workout.

This is a really simple hack for an issue that I dealt with on a daily basis. Although I know my thumbs will stick outside of my sleeves, when I run,they don’t get too cold. Sometimes I will run with my running gloves when the weather drops too low, so technically, my hands are still warm. Some people prefer to not have the thumb loops, but I like to keep my wrists covered when I run. This hack took less than 30 minutes to create and finish, so it didn’t take much time out of my day at all. I hope this hack will inspire other hacks that you might be needing in your life.

Quick T-Shirt Pocket

September 11, 2018September 26, 2018 / Yen-Van Tran / Leave a comment

09.07.2018

0600

Materials:

One T-shirt (or two, but definitely at least one)

Tools:

Sewing machine
Sewing Kit

Living a Zero Waste life means that I create simple solutions for simple problems since I don’t want to go buy anything new or seek out another possession to take care of.

So I usually carry my phone around with me when I’m doing certain types of household tasks. These tasks don’t require a lot of vigorous movement, but I’m definitely moving around. A lot of the time it’s annoying to remember to carry the phone from one place to another when I’m running around the house and if my hands are dirty, I really don’t want to touch my phone. I needed a quick solution where I could carry the phone along with my keys without much hassle. I didn’t want to go out and buy a separate cell phone holder strap that would wrap around my arm. I have one for workouts, and that strap holds down my cell phone securely since I’m running. But I just needed a quick solution where I could carry around my phone and my keys easily for a few hours.

My quick solution was to see my t-shirt sleeve in half and create a pocket. my t-shirt sleeves are usually longer than I need them to be. This gave me the extra material to work with. I simply folded my sleeve in half and pinned the sleeve all the way around.

Depending on the width of your cell phone, measure that distance out on the top of the sleeve. Just make sure you divide the width of your phone in half and center the opening on the top of the sleeve.

For the other sleeve, I made the opening just about the same size since I knew I was going to use the other pocket for keys or my credit card.

Then just sew the sleeve from the front to the back or back to the front, making sure you still leave enough room for your cell phone. Then tie off the open thread ends.

If you put smaller items in the short pockets, they tend to fall towards the bottom of the sleeve. This can be annoying for some but for me it gives me a sense of security knowing my items won’t fall out. I just need to go fishing for my keys at the end of the day.

So there you have it. My quick and dirty solution to built in t-shirt pockets. I like to move the pockets towards the front of my body for easier access to my cell phone, but that’s simply more comfortable for me. I also will sometimes secure the t-shirt using a binder clip, that I’ll use to clip my t-shirt to my bra.

What’s In My Purse?

June 12, 2018June 24, 2019 / Yen-Van Tran / 1 Comment

06.12.2018

0600

Since I’ve written about What’s in My Makeup Bag? and What’s in My Sport Emergency Kit?, I thought I’d show you what I carry around in my purse too. These are the items I use daily and essentially, and these include my zero waste essentials.

So an overall view will reveal that I usually carry my water bottle, my eyeglasses case, purse, keys, sunglasses, my reusable utensils, my cloth napkin and my cloth handkerchief.

Sometimes I will switch out my water bottle with my tumbler, if I’m going to grab coffee. Most of the time I’ll usually carry my water bottle instead of my tumbler because water is more critical for me on a day to day basis.

In my purse, (which is a pencil bag, because pencil bags tend to have more pockets and are washable) I’ll carry my cards and cash, a small bottle of lotion, a comb, my business cards case, a barrette, extra hair ties, my lip balm, lipstick, eyeliner, my mini 3 in 1 stainless steel screwdriver key chain eyeglass repair tool, extra bobby pins (because you can never have enough), and a nail filer.

The only perishable and wasteful items I carry on a daily basis is my lip balm and my lipstick. I refill my bottle of lotion from my bulk lotion bottles. Anyone who uses hair ties knows that they tend to break and I haven’t yet found a good alternative to tie up my hair. I might lean towards going back to the scrunchie though. With the extra protective fabric around the hair tie, the life of the hair tie can last longer.

So there you have it. My purse is simple, and I don’t carry extra stuff around to the point where I can’t find anything in my bag. I tend to divide my items into smaller bags so that they’re grouped together in a more organized fashion. These are my day to day essential items, what do you carry around in your bag?

Tips for Staying Inspired

May 2, 2017August 12, 2018 / Yen-Van Tran / Leave a comment

05.02.2017

0700

It’s currently Spring season in the United States of America and summer is right around the corner. We said goodbye to our winter and it was quite a memorable winter season across the country. For some, this means staying motivated in all aspects of our lives might be lacking. Summer usually means long summer nights and days where we may want to be outside and enjoying the nice weather versus cooped up inside classrooms or work environments. It also means heading to the beach, barbeques, festivals, camping trips, local park festivities and visiting hiking trails. As much as life would be easier to simple have fun all day long, I still work and I do enjoy my job.

I like to tackle four areas of my day to keep myself motivated throughout the day. My categories are my health, my ‘To Do List’, education and happieness. Here’s a simple outline of what you can do to stay motivated to get through your days.

Health- Stay Healthy
1. Drink a glass of water when you first wake up in the morning
2. Workout!
3. Get enough rest
To Do List- Plan Your Day
1. Tackle the top 3 tasks you want to get done on that day
2. The 50/10 rule- Work on tasks for 50 minutes and then take a 10 minute break
3. Reflect daily- 10 minutes of reflection and self evaluation
Education- Keep Learning
1. Reading- Will increase your knowledge, which will keep you inspired
2. Browsing- Learning from tutorials and actively researching on topics will increase your capabilities
3. Brainstorm- This can lead to a gold mine of ideas of tasks you haven’t finished or have yet to plan out
Happiness- Focus On What Makes You Happy
1. Express gratitude- Think about 10 things you are grateful for each day
2. Clean your desk- A tidy desk will be less stressful and less distracting
3. Indulge in your favorite things- Set time aside to relax and enjoy your favorite things

Officially 1 Year Old

January 17, 2017August 12, 2018 / Yen-Van Tran / Leave a comment

01.16.17

0800

So my blog officially turned 1 year old on 1/15/2017. I never thought I was going to blog about my lifestyle or what I designed, but after so many people inquired about my zero waste-minimalist lifestyle and subsequently my design hacks- I decided to write it all down… and it just kept going. There are a few things I learned from blogging, not all were pleasant but understood and accepted with gratitude. Here are 10 lessons I learn in my first year of blogging:

You have to start
1. You will not know where your path will lead you until you start walking down that path. You may not know how and why this blog will benefit you, but the only way to find out- is to start.
Write more and find your voice
1. The more you write and brainstorm about what topics you want to cover, the more you’ll realize what voice you want. You’ll discover the identity of your blog and the topics you decide to cover.
Write more and you’ll discover what you’re really trying to say
1. When it comes to covering the basic topics for your blog, you might have that sequence mapped out easily. However, you might write a post and realize that your images don’t support the topic or that you could have approached the subject in a different manner.
Communication is key
1. As technology advances and our tech devices also advance in the sense that they help us communicate and share information faster, writing will always be one of the oldest and greatest forms of communication. The ability to communicate your ideas clearly is critical for a blogger and the audience participating. We are living in a beautiful time where current events and our own opinions on those events need to be stated in a clear and concise manner.
Don’t start blogging just to make money
1. Blogging takes a lot of work. It takes a lot of planning and time management. It is an art form that takes persistence and dedication. Blogging is your space, and for those who want to stop by and read, it’s for their entertainment. But don’t expect to make money, don’t go into this thinking it’ll definitely make money- you have to want to blog, you have to want to write and express ideas.
Good Content
1. Once you figure out the identity of your blog, create good content. Give your readers a reason to visit and spend a few minutes in your space. Whether it’s sharing of knowledge, personal reflections or some tips, but put out good content.
Listen to your audience, listen to the public
1. When your audience responds to a blog post, listen to them. There is a reason why they’re wondering about it or responding to it in your comments section. How you perceive your topics is different from how the internet views it.
Be honest, be you
1. There’s no point in trying to be a different personality behind the safety of a computer screen. Blogging is communication and your readers will be able to tell if it is not your voice. There is a honesty behind blogging, don’t be afraid to be you. You’d be surprised how many people appreciate that.
It’s not a race, it’s a march, a slow walk
1. Blogging can can take up time that you don’t have to spare. But if you give yourself a reasonable schedule, you’ll build your content and other social media slowly. It’s about showing up and being consistent.
No success is worth sacrificing loved ones for
1. Blogging can be fun and even I am proud of the content I’ve created in the past year. However, there was a time when I was blogging in the beginning when I sacrificed valuable time with loved ones. I don’t do that anymore, but I knew that I couldn’t sacrifice my health, my family and my friends for this- it wasn’t worth it.

So for those who are thinking of starting a blog or a journal or anything that they’re willing to share with the public, start… start it now. I can honestly say that when I look back on my content, I’m proud of what I’ve written. This whole site is a process, it’s not definite in its answers or solutions. This site represents a personal process as well as my design process, but both processes are mapped out by time and the lessons learned along the way. In middle school, I had a social studies teacher, Ms. Mathers, who had a banner that she had attached to one of the rafters on her ceiling. It said “KNOWLEDGE IS POWER”. As a 12 year old, I used to re-read that banner when I got bored in class, and I never really understood the value of it. Now I know as an adult, knowledge is power but the voice behind it- is UNSTOPPABLE.

Proper Disposal Of Razor Blades

January 4, 2017August 12, 2018 / Yen-Van Tran / 1 Comment

01.04.2016

0800

Razor blades are made from recyclable metals, but you cannot recycle them. In fact, in some places it’s actually illegal to recycle razor blades!This is because razors can harm the sanitation workers and animals that come into contact with them. They are also very thin, so they easily get caught in recycling equipment and cause damage.

You can’t recycle razor blades, but you can’t just toss them in the regular trash either. So how do you dispose of them safely?

Find an empty glass jar with a lid and when you’re done with your razor blades, keep them in there. Check with your local recycling center about how to dispose of blades properly, perhaps they have a “sharps disposal program” for your county. I’m lucky enough that in my county, my recycling center actually has a medical waste disposal bin so I usually will drop it off in there.

Most of my blades are replacement blades for my Economy Cutter H-595 by Uline, my Fromm Shaper Replacement Blades and my Astra Platinum Double Edge Safety Razor Blades. I use a glass jar because it’s easier to see among the trash pile and the blades will definitely not penetrate the glass jar. This is a simple solution to what can become a disastrous situation for sanitation workers. Please, please take proper precautions and dispose of your blades in a safe manner, for all of the people involved in the long and complicated process of discarding your trash.

I have yet to fill up an entire glass jar. Oh and if your county doesn’t have a ‘sharps recycling program’ just pawn it off on someone else who lives in a county which does have one. As for me, I’ve become a razor blade mule among my acquaintances… but you know… I don’t actually carry them IN me. I’m more like the mule who carries around a shopping bag and a sign around my neck. (Mules don’t have arms- stop it.)

Yea, I’m that guy.

My Cat Is Not Zero Waste

September 21, 2016August 14, 2018 / Yen-Van Tran / Leave a comment

09.21.2016

0800

Trying to create zero trash for my cat is almost impossible. I’ve tried, but due to some medical conditions, it’s virtually impossible. I have a male cat and he was neutered when he was younger. Unfortunately, male cats who are neutered, are more prone to urinary tract infections and therefore, require special diet food that has a low sodium content. Also, in order for him to not develop another urinary tract infection, he needed fresh water constantly. We bought him a small drinking fountain which he helped himself to. These two requirements produced empty tin cans of cat UTI management food as well as charcoal filters.

As he aged, he developed Diabetes and requires insulin shots twice a day. This required insulin medication as well as insulin needles. He’s a large cat, but he’s always been a large cat so weight gain was his genetic default. Lucky for us, he’s always been an indoor and outdoor cat, so he always used the backyard as his giant toilet. But with him being an indoor and outdoor cat, he required flea medication. I’ve been asked “Why don’t you just make him an indoor cat? It would cut back on the flea medication trash that you produce.” But forcing an animal to stay inside when we clearly have outdoor roaming space for him seemed unnatural to me. I wanted him to roam free and go play outside when we weren’t home. So the diabetes and flea medication produced tin cans of glucose management food, insulin needles, insulin medication and the flea applicators.

Over the years, he also got into a few fights with other cats or raccoons that roamed the neighborhood. For those special occasions, he required medication and sometimes even surgery which produced trash as well. I usually return the pill bottles and jars to the veterinarian so they can dispose of it. I’m lucky that I live in an area that allows free medical waste dumping, and even if I didn’t, I know my veterinarian will collect the medical waste from his patients for a small fee.

As for toys, he never loved to play with a lot of toys. In fact, he really only likes his catnip pillow, shoelaces and metal chain necklaces . I had a catnip plant that I grew for him awhile back and once in awhile, I would dry the catnip leaves and compost the old catnip. I would then refill his pillow with new dry catnip. Unfortunately he liked it so much that he would lay on it and eventually crushed the life out of it. That too went into the compost bin. I’m lucky that he’s easily entertained. He also never wanted his own bed, he always just adopted any place in the house to sleep.

Facts:

Urinary Tract Infection Medical History = Prescription Diet c/d canned food & Filtered water with charcoal filters
Diabetes II Medical History= Glucose Management m/d canned food, insulin needles, insulin medication
Indoor & Outdoor cat = Advantage Flea Medication BUT no litter box
Entertainment = Catnip pillow, but I refill the catnip pillow with fresh catnip. He just likes to play with shoelaces and metal chain necklaces.

So the recyclable items that I do produce are the tin cans of UTI food and diabetic food. His insulin medication, insulin needles and other medications are also recycleable, but considered medical waste recycling. The charcoal filters and advantage flea medication are the items that do end up in the landfill. I actually have a separate jar of trash that comes from owning a cat. He also no longer uses the water fountain that used the charcoal filters, he requests fresh water from the faucet when he’s thirsty with a drawn out meow.

Trying to own a pet and not produce trash from them is quite difficult. I know this much, to take on a pet is a great amount of responsibility and it is not a simple responsibility to ignore. I am not a veterinarian and I do not know what nutrients he needs and the sufficient amount of each nutrient and vitamin, therefore I do not attempt to make cat food on my own. He has very few toys, only wants his catnip pillow, which I will stuff with fresh catnip and compost the old catnip.

I started this journey almost five years ago, so I’ve compiled a nice amount of Advantage Flea Medication applicators for cats as well as charcoal filters. He stopped using the water fountain about three years ago, so he hasn’t produced anymore trash from that. He probably won’t last through the end of this year, but it’s amazing to see how much owning a pet can add to your trash collection. Once you lay it all out and calculate the amount of trash that’s produced, it’s an eye opening realization of what you’re contributing to the landfill.

Work Desk Essentials

May 2, 2016August 12, 2018 / Yen-Van Tran / 1 Comment

05.02.2016

0830

I keep a small desk essentials kit at my work desk so that I don’t have to carry items back and forth from home constantly. I keep some loose leaf green tea along with a tea infuser, and some dry snacks. At my job there is a kitchen with a microwave, an electric kettle ready for employees, so I base my small kit on the available resources. In my bag which I do carry back and forth from home, I keep a stainless steel travel mug, and a set of utensils along with a fabric napkin. The reason why I keep my utensils and coffee in my bag is due to the fact that I like to be ready to go out to eat when the opportunity arises. I also will use my coffee mug for coffee, teas and water as well.

The variable items that I tend to carry is my stainless steel water bottle, whatever lunch I’ve packed for the day, and my “to go” breakfast which is usually oatmeal in a small mason jar. Depending on the days schedule or how much time I have before I step out of the front door I may or may not carry along the variable items.

Alternative Screen For Doors

March 16, 2016August 14, 2018 / Yen-Van Tran / Leave a comment

03.16.2016

0830

Materials:

Fabric shower curtain
Shoelace
Metal rings
Binder Clips
Nails (thin enough to fit through the holes of the shower curtain)

Tools:

Hammer

As Spring is rolling in and Summer is around the bend, I wanted to show a design hack that doesn’t require much commitment. I have a small balcony that leads up to my area and it doesn’t have a screen to keep out pesky bugs. I’m a fan of fabric shower curtains for the fact that I like to toss them into the washing machine and hang them up to dry. I have a few fabric shower curtains that I keep around for design hacks such as these.

A shower curtain fits almost the height of a standard door frame. For anyone who lives in a space where they cannot impede on the design structure of the space (ie. due to tenant contracts via landlord), this seems to ease the pain of when your area is overheating during the hotter season. I took 2 tiny nails and hung up one of my fabric shower curtains. Make sure that the nail on the end where the hinge of the door frame is located, is about 6″ from the edge of the frame. This is because when you swing the door open, you have to take in to account the width of the door itself. The curtain must hang easily and without tension as the door is open at 90 degrees. On the door handle side, try to use a binder clip to extend an arm to hook it to any lock hinge with an S hook, or you can simple place a push pin in the wall and hook the binder clip handle to it.

The nail holes are also a simple fix if you decide to move out and need to patch up the holes with caulking. On the open side of the shower curtain I clipped a metal binder clip and on the hinge side of the door, I looped a metal ring. The side with the metal loop tends to wedge perfectly in between the door and the frame on the hinge side. However, when placing the metal ring, try to wedge it horizontally. I actually use a folded up washcloth to wedge under the door to hold it open too.

On the bottom of the curtain, if you want some weight to the curtain, you can simply attach some metal binder clips with a key chain on each (I know you guys have these key chains lying around somewhere). If you don’t have any key chains, try to find a small weight to hang from the binder clips. The reason why I use binder clips in this design hack, is because I don’t want to sacrifice the integrity of the shower curtain itself.

If you still want the curtain to be lower, you can take some extra shoelace/string/rope/twine and create an extension for the top like this:

Because the nails are on the top of the door frame, you have about three inches to give in the distance that the curtain starts to hang. If you add these extensions on, the curtain should fit right under the door frame. But if you do add these extensions, you will need to add another nail so that the middle of the curtain isn’t loose. So it will look like this:

My extensions seem to be enough for me when it comes to hanging my shower curtain and the design on the shower curtain gives a little bit of illuminated art during the day. I don’t add the binder clips or the key chains at the bottom of mine during the summer. I think I like the drastic movement it makes with the wind when it flows through my space. I hope this design hack helps for any of you who may be living in apartments or homes that get uncomfortably hot during the summer. It’s a way to make your own screen without destroying the integrity of the architecture and design or paying for a brand new screen.

Less Is More

January 21, 2016August 15, 2018 / Yen-Van Tran / 2 Comments

01.21.2016

0700

I bought this shirt in 2000. The shirt is from Consolidated Skateboards, a great company. I bought it because the quote sparked my interest and I’ve never been able to let it go. It’s a simple red long sleeved shirt, with only the front print that you see, and nothing on the back. I never knew how much of an impact those words would be.

When people say that I’m simplifying my life, I jokingly call my system “Being Strategically Lazy”.

When I decided to start living a zero waste life and because I was eliminating so much from my life, I was also eliminating the amount of storage area I actually needed. So here are a few things I decided to get rid of:

Dresser: I use one shelf now and I hang up the rest of the items
End Tables: I use two ottomans that have lids which I can flip over and use as mini portable coffee tables
TV stand: My TV currently sits on a book shelf. I’m planning to use a projector that will be mounted to my wall to watch movies/TV (but that’s for the future)
Filing cabinet: I digitized all of my documents and keep a small folder of the legal documents.
Nightstand: I use my drafting table stool as my stand and I made a shelf to sit at the bottom of it, so I could at least place items down. I also created a pocket so that I could have a location to place my phone when it was attached to the charger as well.
Bookshelf: I donated of one of my two bookshelves because I had digitized almost all of my books so I didn’t need the piece of furniture anymore.
Futon: I donated my futon and replaced it with a couch 🙂 So it’s technically a replacement piece

I have:

1 four level bookshelf
1 couch with two ottomans
1 bed
1 drafting table, which I use as my desk
1 hope chest, which I use as my seat at my desk
1 “nightstand” (I use the chair from my drafting table set as my nightstand)
1 dining table with 6 wood fold up chairs
1 IKEA Poang Chair

I think getting rid of the dresser made the biggest impact because it wasn’t just the frame of the dresser or the drawers themselves, but it was also the amount of the contents stored within each drawer. There’s another article I read which might be of interest for those who want to read more about this: 15 Pieces of Furniture You May Not Really Need

It certainly helped me look at the use of furniture differently. Here’s my little nightstand contraption. I made the pocket from an old pair of jeans and I used pink shoelaces as ties for hanging the pocket. I used an old picture frame as a flat surface on this nightstand and attached it with some sticky velcro dots that were left over from another furniture set. I found a bag of pink shoelaces at my aunt’s house, she was going to throw it out, so I took it home. I keep all of my velcro straps because velcro is amazingly versatile and I keep extra metal rings and shoelaces for projects like these.