DIY Reusable Face Masks

April 27, 2020March 16, 2021 / Yen-Van Tran / 1 Comment

04.27.20

0600

Materials:

Paper- Graph paper might be easier to follow the grid system
Pencil- If you plan on sketching out the templates
Fabric Crayon- If you plan to sketch the templates on dark fabric
Ink pen- For tracing the templates onto the fabric pieces
Ruler (Centimetres)
Fabric
Elastic bands/ribbon/surge fabric together to create straps to tie around head

Tools:

Sewing Machine
Sewing Kit

So I’ve been seeing a lot of YouTube videos, blog posts and Instagram posts of DIY reusable face masks recently. I wanted to try to figure out how to design a face mask that anyone could make and use.

However, I didn’t want my readers to have to print out a template if you were not able to. I wanted to teach my readers how to be able to build your own template. Not everyone has access to a printer, printer paper or even printer ink right now, so that was my overall goal for this blog post.

So I decided to design my own templates, but I wanted to give you guys the measurements as well as the templates. The following 6 images are of the designs I created (they are in JPEG format). You can download them or use the measurements and create them yourselves. These were all drawn on 8.5″ x 11″ sheets, or 21.59cm x 27.94cm sheets. The light, dashed lines, around the bold black boarder on each image, is the edge of the paper. I decided to create these drawings in centimetres since the metric system is more universal. The fabric filter insert templates are not a guarantee of protection from any virus, but it will give you an extra layer of fabric, along with the mask.

I had drawn out the first templates, so what you’re looking at (below) was my own first round of the templates. I cleaned up the design for the downloadable images for you guys.

First decide which fabric will be the exterior layer of your mask, then decide which fabric will be your interior layer of your mask. After that, you can choose a fabric to be your filter layer. I tend to chose a lighter color for my filter layer, so it stands out from the rest of the mask. For my fabric filter inserts, I used whatever leftover fabric I had.

I decided to show you how I created the child sized reusable face masks and reusable filter inserts in this blog post. The same steps are used to make the adult fabric masks and adult filter inserts.

REUSABLE FABRIC FACE MASKS:

First I cut out fabric pieces for each of my masks. There are two fabric pieces for each of those six cutouts in the next photo. I chose my exterior layer fabric and interior layer fabric and I then traced the child mask template onto each set of fabric piles. I didn’t trace the templates onto each fabric piece, since I like to cut my fabric, two at a time.

I cut up the fabric I chose for my filter layer for each mask, and then I traced the child filter templates onto the fabric pieces.

Once I traced all of my templates onto the correct fabric piles, I pinned the fabric piles together and cut out each set accordingly.

For each pile of the filter layers, I placed each set with the ugly side facing up, so I could hem the edges. I simply folded over the edges, pinned them in place and then sewed them together. I used a back stitch so I could secure the ends of the sew lines. I used a zigzag stitch throughout this whole project.

So each set of fabrics for each mask will include, two exterior pieces, two interior pieces, two filter layer pieces. I had already cut out my ear straps, which were 12cm each. But I wil elaborate on the ear straps later on.

Now you have to sew each set of fabric layers together. For each set of fabrics (ugly side facing outwards), sew along the arch edge, from one end to the other.

Now we have to line up each fabric pieces to get ready to be assembled. First, interior layer (ugly side down), then on top of that is the filter layer (ugly side down), and lastly, the exterior layer (ugly side up). Pin together the stack so they wont move during the sewing process, and sew along the top and bottom of the mask. Trim the excess thread on the ends of each sew line.

Flip the face mask inside out, between the filter layer and the exterior layer.

Once you flip the mask inside out, you should be looking at the pretty side of the exterior fabric on one side of the mask, and then the pretty side of the filter layer fabric on the other side of the mask.

I folded in the sides of the mask so I could pin the fabric together. You can also iron the folded sides too, so there is a clean and crisp edge. I just needed the edges to build their shape until I added on the ear straps.

I actually cut out straps, about 12cm in length. In order to test the fitting of the straps, I actually pined the straps in between the exterior layer and the interior layer, on the side. The pins are pushing from the interior layer, outwards. If you want to use this method to test the fitting of the ear straps, please be very careful when trying on the mask.

If you don’t have elastic bands, you can quickly sew long pieces of fabric together and use the long pieces as ties, to tie around the user’s head. I used four pieces of fabric that were 72cm in length and made my straps 4cm wide, for one mask. Technically, you probably only need each strap to be 25cm in length, as long as it can be tied around a large adult head with enough extra slack for an extra knot. Each strap will be sewn to each corner of the mask.

I cut out each strap, folded them into thirds and then used only two pins to secure one beginning end of the strap together. I didn’t pin down the whole strap, because with a fabric this small, it’s quicker to sew and fold simultaneously, as the fabric is passing underneath the presser foot of the machine. The machine will feed the fabric under the pressure foot, so just hold the folded fabric steady and taut.

I also created a back stitch at the beginning and end of the strap to secure the sew line.

Once you decide if you want to use elastic bands or sew your custom straps together, you can tuck the ends of the straps between the exterior layer and interior layer, and sew the edge of the mask together.

Using my ink pen, I drew tiny triangles on the top straps of each mask to indicate the top verses the bottom of the masks.

EDITERS NOTE:

I decided to change the style of straps for my masks, since I was not 100% satisfied with the design. I decided to shorten the seam on the top and the bottom of the mask so there would be a small 1/4″ gap at the top and a small 1/4″ gap at the bottom of the mask. I did use the backstitch control on my sewing machine so the thread would be held in place. As you can see, I used the backstitch at the beginning and the end of the sewing line.

I then attached an elastic band to a small safety pin and inserted the safety pin into one of the small gaps, so I could run it through the mask, and out the other end. It doesn’t matter which direction you run the safety pin, but I tend to start with the small of the two gaps, so it’s easier to locate the pin when I need to pull it out the other end.

I then tied off the elastic band with a single knot. I like this style more than the last style, because this technique allows the elastic band to be replaced easily and adjusted easily.

REUSABLE FABRIC FILTER INSERTS:

Using my templates, I cut out fabric pieces for both my adult template as well as my child template. For each template, there are two fabric pieces per set. I then pinned them together, so they wouldn’t move when I had to sew them together.

With the ugly side of the fabric facing outwards, I cut out filter insert pieces and then sewed them together. I sewed in one direction, around the edge of the mask, but left one side open. This opened side will be the location of where the filter insert needs to be flipped from the inside to the outside. I used the back stitch lever to secure the sew line, as always. I then trimmed the extra thread.

I flipped the filter insert, inside to outside and using a chopstick (you can use a slim stick), I made sure all of the corners and edges were fully stretched out from the inside.

I then ironed all of the fabric inserts I had sewn and then tucked in the open end to pin the fabric closed. I then hand sewed that edge of the filter, using a running stitch.

So there you have it. My templates are available for anyone to download and you can make as many as you like. Please keep in mind that these masks are not a guarantee against any type of virus, but they will help protect you from other people’s exposure to you. There are a lot of fabric mask tutorials on social media right now, and I hope you can find one that you prefer to use and make. I hope this blog post helps anyone it can reach.

PLEASE STAY SAFE AND HEALTHY EVERYONE AND I HOPE TO SEE YOU GUYS SOON!

☁️

Sofa Armrest Organizer

October 14, 2019October 14, 2019 / Yen-Van Tran / Leave a comment

10.14.19

0600

Materials:

Two Curtains at 5′-10″ in length

Tools:

Sewing Machine
Sewing Kit

I have an extra set of curtains, which I didn’t want to use anymore. I decided to create a sofa armrest organizer with both curtain pieces. Both curtain pieces were 5 foot 10 in length, and 27 inches wide.

I wanted my sofa armrest organizer to sit at a certain height off the ground, but I also wanted the top half to also tuck underneath the couch cushion. I first measured how high off the ground I wanted my couch armrest organizer. Since I needed to hang it over the sofa armrest and then wrap back over the arm to tuck underneath the cushion, that left about 47 inches to tuck underneath the cushion.

I wanted to store books in the first organizer, which would be fairly heavy, so I needed a lot of the material to tuck under the seat cushion to hold it in place. I actually wanted the top part of the organizer to tuck underneath an entire sofa cushion width, due to the weight that would be applied.

FIRST SOFA ARMREST ORGANIZER:

When I measured out my first design, I wanted the pockets for my books to be 14 inches in height. I first hemmed all of the edges and then I folded one edge to create the 14″ tall pockets. I sewed around the edge of the folded piece (yellow arrows) and then divided the pocket in half, and sewed a dividing line down the center to create two tall pockets (red arrow). These pockets will be able to hold my books and paperwork that I’m currently working on. I wanted my pockets to be a bit taller than the standard paper size (8.5″ x 11″), due to the fact that I knew the width of the pocket might eat up some of the height. I also wanted to be able to hide my books and paperwork, so my pockets wouldn’t look like they were overflowing with paper.

To attach the sofa armrest organizer, I removed the couch cushion on the side of the couch, located how high I wanted to hang the organizer, and then replaced the couch cushion. Since the top half of the fabric organizer is tucked under the couch cushion, it stayed in place.

SECOND SOFA ARMREST ORGANIZER:

I also wanted to create a second design, which would have smaller pockets for smaller items. My second design would have 10 inches in height for the books, and 6 inches for smaller objects.

Using the same sewing method as the first design, I hemmed all of the edges of the fabric material, and then measured 16″ of material at one end. I folded up the 16″ material, sewed along the outside edges of the tall pocket (yellow arrows), which created a giant 16″ tall pocket.

I then took the bottom 6″ of the pocket and folded it up, to create a shorter 6″ pocket at the bottom. This 6″ tall pocket also helped create the 10″ pocket behind the smaller pockets. I then sewed on both of the side edges of the fabric piece (red arrows) and then sewed a dividing line (blue arrow) to create a total of four pockets for this design. I sewed the edges of this design, all the way to the top of the pocket to reinforce the side edges.

Using the same method as the first sofa armrest organizer, I located where I wanted the organizer to hang on my armrest and I tucked the top half of it under the couch cushion on the end.

Since these sofa armchair organizers are made of fabric material, I can toss them into the washing machine and wash them easily. I can also fold them up and put them away if I don’t need to use them. Fabric is my favorite material to work with since it can be taken apart and reused multiple times. I love that it is a very flexible medium and I was able to put my old curtains to good use.

Mending Items Versus Buying Items

July 29, 2019August 5, 2019 / Yen-Van Tran / Leave a comment

07.29.2019

0600

If you read about my Fast Fashion post, it relates to this one. If not, please go check it out. Even though I do by thrift store items, I will still mend an item to save it from a donation. Sometimes I will mend my items and then I donate the item. For instance, I found an old shirt at my aunts house. It had a few holes in it but overall, I liked the color and I didn’t mind the cut of the shirt. The color went perfectly with my color palette for my capsule wardrobe, so I really wanted to save it from being donated. I just needed to mend the shirt, so it would be decent to wear.

Now I have an almost new shirt.

Whenever I upcycle clothing, I always keep scraps of the leftover clothing item. In my Reusing Fabric and Thread blog post, I wrote about keeping my fabric scraps in a small bag. I literally have a bag of scraps. I love fabric, and the use of fabric in different products, (depending on the thread count, material, and the way fabric is sewn together,) can be a very durable material.

Some shirts have higher thread counts, which lends them to become excellent candidates to upcycle into grocery bags, or other heavy duty bags. The smaller scraps that I keep, I always try to find a use for them. Whether it’s going to be upcycled into a small project or large project, the one thing I can count on is that I can throw it in the washing machine to clean it.

If I had a choice to make, with picking and choosing reusable products, I prefer to choose items that I can wash easily. I don’t like to buy items which require a special cleaning method or liquid to clean. I like to sew and mend items, because the product that I’m usually mending, only needs to be washed with soap and water.

If you reflect on the products that you use daily, the majority of them are probably sewn together: your clothes, handbags, wallets, car seats, bedding, upholstery, etc. Knowing how to sew and understanding how to repair fabric products has been a life saver for me. I actually learned how to sew by hand, and didn’t learn how to use a machine until years later.

Learning how to mend items can save you money, time and stress. Even the simple act of sewing on a button is helpful. You can save a simple dress shirt, like I did, from sending it to a donation station.

Upcycling A Shoe Organizer

October 2, 2018October 2, 2018 / Yen-Van Tran / Leave a comment

10.02.2018

0600

Materials:

One over the door shoe organizer
X-acto blade
Cutting mat (or cardboard, plywood, some type of surface you’re willing to cut into and can damage just a little bit)
4 Safety Pins

Tools:

Sewing machine
Sewing Kit

So I’ve owned an over the door shoe organizer for awhile. I didn’t use it a lot because I didn’t have many pairs of shoes. When I started to declutter my life and minimize my possessions, I kept it because I still liked the design and I knew I could use the material to create something else.

Because I’m not a fan of keeping items out in the open, much less hanging them out in the open, I knew I wanted to upcycle this shoe organizer into smaller organizers. I personally like things to be put away. My minimalist, zero waste lifestyle lends my living space towards clean surfaces and minimal decor. So I wanted to create two smaller organizers which could be hung up in the closets.

The goal was to create two separate organizers that were each 2 pockets across by 3 pockets vertically on each side of the smaller organizer. So each side of the hanger would hold a grid of pockets that was 2 pockets across by 3 pockets vertical.

First I cut the shoe organizer in half.

I then folded each organizer in half (vertically) to find out where I wanted to locate the hangers.

I then placed each hanger on each organizer, as I wanted them to sit. I wanted to place each hanger so that the top bars of the hangers would still be protected by the fabric. I only wanted the neck of the hanger to stick up and out of the fabric so the fabric organizer would sit higher on the hanger. The hanger would have more control of the overall weight of the items inside each pocket when it was hung up.

I placed the hangers where I wanted each hanger to be located on each organizer and then marked the location of the bottom bar. I needed to make a mark at those locations, because that’s where the bottom of the openings for the hangers would pass through.

Using the X-acto blade, on the folded edge, I carefully cut a straight line of where the hanger would stick out. I cut along the mid line of the fabric grid pattern and only cut enough for the hanger to fit. You can sew the edges of these openings if you want a clean and sturdy structure around the edge of the opening. I suggest using a running stitch to do that, if you choose to.

Using the bottom of opening as a location marker, I sewed both sides of each organizer together. I wanted the backs folded and sewed to one another to create a more sturdy central structure. I sewed from the bottom of each opening, around and up to the other side, making sure I stopped at the other marker.

The idea was that I wanted to seal the two flaps of pockets to each other, but leave enough room for the hanger to slide in and out of the design.

Once the hanger is slid into place, the flap should allow the user to remove the hanger if necessary. I used a hem stitch to secure the top of the opening on the folded edge (see below). I did this because I know that the weight of the the organizer will tear the opening over time. I wanted to secure the top of the opening and reinforce the structure.

I stitched an extra line above the hanger (towards the folded side of each hanger), but underneath the pocket flaps, to reinforce extra support for the organizer.

Using a safety pin, I pinned the opened edge approximately where the top of the hanger was located on the opposite side. This way, the hanger can be removed easily when it comes time to wash it or put it away. The safety pin will act as a closing mechanism to hold the hanger in place.

So there you have it, this is how I upcycled my over the door shoe organizer. Although, I technically only created smaller shoe organizers, I had the idea that I could use these smaller organizer to store smaller items such as jewelry, scarfs, socks, etc., that can get lost in a closet. Basically, anything you might store in the top drawer of your dresser, you might use this for. I don’t use a dresser, so this product can be useful for me. Right now I actually use a few of the pockets to keep some running and workout items organized. I like this design for the fact that it’s double sided and it can be folded up and put away if it’s not being used. Hopefully this post might spark some organizational ideas for your life.

Until next time!

Upcycling Denim Jeans

January 30, 2018August 13, 2018 / Yen-Van Tran / 5 Comments

01.30.2018

0600

Materials:

One pair of denim jeans

Tools:

Sewing machine
Sewing Kit

So recently I started going auditing my traveling items such as my bath bag, travel accessories as well as my sport bags. I wanted to find 3 pieces of clothing to donate, but I also noticed that my bath bag wasn’t containing my bath items comfortably.

So I had the choice to go buy/find a new bath bag or find another solution. Out of the items I decided to donate, I found a tank top, sweater and a pair of jeans. Denim is one of my favorite materials to work with. I love upcycling denim into new items. The idea of donating the pair of jeans wasn’t exactly what I thought I would do, so I decided to make a stand up bath bag for myself, or at least a few stand up bags.

I’ve owned bath bags before, but the material was with a polyester or nylon blend. Over time, my bath bags would have soap or toothpaste residue stains. I figured that with a denim bath bag, I could simply throw it into the washing machine and it would clean easily.

I divided each leg in half by folding it in half. I then cut the legs off from the pair of jeans and then divided each piece in half.

I turned each of them inside out and designated the wider end of the pieces as the bottom of the bag and the smaller ends as the top of the bag. I folded the top of the bags down to create the drawstring tube. This is where I wanted to install the drawstring later.

DSC_8697 - Copy

I hemmed the bottoms of the bags by simply sewing a sew line across the bottom. I then sewed the drawstring tube. I measured 2″x2″ squares on the corners on bottom.

I marked these white dots on BOTH SIDES OF THE BAG, near the bottom section of the bag. These white dots will be used as guides of where you will sew in the next step.

DSC_8699 - Copy

I then flipped the bag upside down, and so that the right side seam was facing up. I then folded the bottom of the bag to create a diamond shape. You should be able to locate all four dots that were created in the last step, when molding the diamond shape.

DSC_8704 - Copy

The dots are guides to sew where you will sew horizontally across the diamond. After sewing the two lines, the diamond should look like this.

Since I was initially thinking of making a new bath bag, I wanted to sew a small pocket inside of that bag. I had this extra pocket left over from my Handmade Handkerchiefs project, so I added it on the inside. To find the opposing edges of the box, you can locate it by finding the perpendicular lines of the top and bottom hemmed lines.

DSC_8715 - Copy

If you want to make a small pocket inside, you can sew a piece of material to the inside of the bag, as long as you leave to top of the material open.

In this case, because the pocket was more than half of the height of the bag, I placed the pocket towards the bottom of the bag. I also knew that I would be folding the bag down when in use, so placing it towards the bottom gave me room for the top to be folded down.

Once I pulled the drawstrings through the bags, this is what they looked like. They stand up pretty well, and I can fold them down to create a top frame for the boxes.

This is what my bath bag looks like now.

I like the fact that I can simply fold my bag down and be able to access everything I need inside. I also have the habit of attaching a ring to the interior of any bag. So I attached a metal ring to the inside seam of the bag, because I wanted to hang small bath items for easy access.

So there you have it. This was my solution to my travel bath bag issue. I genuinely love denim and to make these stand up drawstring bags with this material is one of my favorite kinds of sewing projects that I like to get involved in.

I used my other bags for some camera gear and for another bag I use for traveling. The denim creates a nice thickness for the bottom of these bags, which is why I like to use them for electronics.

As a bonus…

I made a bag out of the top part of my denim jeans. I simply flipped the top inside out and hemmed the pant leg openings. Due to the nature of how the jeans were cut and sewed, I folded the outer edges of the jeans inward when I hemmed them.

I then sewed a zipper to the top opening of the jeans using sewing pins to hold the zipper in place and then sewing it to my pants. I used the same sewing steps to attach the zipper as to when I Created Slim Hanging Organizers.

Since my zipper wasn’t quite long enough for the length of the jeans, I closed off the jeans by sewing the top together.

I used an extra tie to create the handles of this bag. This was a simple choice but some people may prefer to use a belt or something more to their taste. I chose the tie because I wanted to be able to throw everything into the washing machine.

And as always, I attached a metal ring to my zipper for a slightly easier access.

I use this bag to hold some smaller items that need a bit of cushion like camera gear or smaller electronics.

Creating Fabric Boxes

January 16, 2018August 12, 2018 / Yen-Van Tran / 8 Comments

01.16.2018

0600

Materials:

Hanging Fabric Shelf Organizer
Quilt Batting (optional)

Tools:

Sewing Machine or thread and needle
Sewing Kit
Ruler
Pencil
Iron and Ironing Mat

So I had a hanging fabric shelf organizer which I had replaced by sewing slim hanging organizers from pillow cases. You can find that blog post at Created Slim Hanging Organizers. But once I replaced the canvas hanging organizer, I didn’t know what to do with it. So I decided to create small fabric boxes with the leftover material. I first took it apart, literally took it apart piece by piece. I recycled the cardboard and I was left with rectangular pieces of canvas.

This project works best if you have perfect square material, but I didn’t want to waste any material so my pieces were left as rectangular pieces. Rectangular canvas pieces yield rectangular shaped boxes. Square fabric pieces will result in perfect square boxes.

So I first worked on the larger fabric piece. I first sewed the edges of the fabric so it wouldn’t com apart. I wanted these boxes to have a rougher look to them so I didn’t hem the edges. You can insert a fitted quilt batting piece in between your fabric pieces if you are using a softer fabric and if you want your box sides to be a stiff frame. I didn’t use batting because my material is canvas in this project.

I folded it in half (doesn’t matter which direction), and then I marked off a 3 inch by 3 inch triangle on each corner of the folded side. These triangle marks are the red lines in the photo. The larger the triangle, the higher the height of the fabric box will stand.

I opened it up and I folded the fabric piece in the perpendicular direction, with the first set of triangle marks still facing upwards.

I then proceeded to fold the fabric and mark off the second set of 3 inch by 3 inch triangle on each corner of the folded side. These are located with the blue lines in the photo.

From there, I sewed over the lines of where I had marked each set of triangles. I sewed the blue lines first. I then opened up the fabric piece, lined up the other corners in order to sew over the red lines.

Once you sew all of the four corners, when you open the fabric, it should look something like this. However, now you have to flip the box inside-out. Once you do that, the rectangular tabs you created should be on the inside.

With the four triangle flaps sticking straight up, fold them down to create a straight edge of the box. You can pin it down with sewing pins to watch the shape take form. Once you fold down all of the standing flaps, you should have a similar box like the photo below.

Now you just need to sew the standing flaps down to create sharper straight edges of the box and then sew the flaps on the inside of the box to keep them flat against the sides.

I’ve used the large fabric boxes to organize items in my linen closet as well as my camera gear items. Although these aren’t perfect squares, I like the idea that these fabric boxes are easily modified to most objects.

For the smaller piece of fabric, I hemmed the edges to keep the fabric together and then I measured a 2 inch margin all around the edges. Here, you can insert a piece of fitted quilt batting before sewing the edges together, to give your fabric box a more framed look.

I folded each edge over and ironed the lines to define the bottom of the box.

Using sewing pins, I folded in each corner and held them there. These smaller triangles will help define the corners of the box.

For each triangle corner, I found the center of the triangle and folded it in half. Once the triangle folded in half, the edges of the box came together naturally. I hand sewed these edges together by using a running stitch pattern. I sewed the running stitch in one direction, then simple went back the opposite direction to fill in the gaps in the pattern.

Once I sewed all four corners, I proceeded to sew the triangle flaps on the inside of the box to the walls.

I’ve used the smaller fabric boxes to keep smaller items organized that sit on shelves and table tops. So there you have it, these were very simple boxes made from the canvas material I had left over from the hanging fabric shelf organizer. You can use pretty much any fabric you want, but you may need to use quilt batting to strengthen the sides of the boxes.

Handmade Handkerchiefs

October 3, 2017August 12, 2018 / Yen-Van Tran / 2 Comments

10.03.2017

0600

Materials:

A few shirts (I used collar shirts for the fact that I like this material and these were extra shirts I found)

Tools:

Sewing machine
Sewing Kit

So there was a recent heat wave that spread through California, and it was HOT. I only had two handkerchiefs and those were being used up fast. I knew I needed more. Although I could have bought a set of twelve for about $5.00. I thought making my own would be more fun.

I found some old collar shirts, that had never been worn (and would never be worn) to make into handkerchiefs. Since these shirts were dress shirts with a tight thread weave, I knew these would be durable over time and the material was still 100% cotton.

I had no idea how many handkerchiefs I would produce from these three shirts so I was curious about the end product. Most handkerchiefs are square shaped and I knew these would vary in size, so I kept that in mind. My current handkerchiefs were 10″ x 10″.

First I took apart each shirt. this meant I had to tediously unravel each thread that made up these shirts. This took awhile to do since certain parts of the shirts had double layers. I also needed to be able to look at each piece of each fabric that made up these shirts. I needed to be able to size up my handkerchief template accordingly.

Once I took apart all of the fabric pieces that made up my shirts, I started to map out 10″x10″ sections on the fabric. There were pieces that I knew I could not use, such as the cuffs and collar of the shirts. For these pieces, I put them aside for future projects. Parts of the shirts such as the Yoke, would have to be sewn together to create enough surface area for a handkerchief.

Due to the shape of each piece of fabric, I wasn’t able to make perfect 10″x10″ squares. Instead, the shape of the fabric pieces gave me some very unique shapes to use for handkerchiefs. Who said a handkerchief had to be a perfect square anyway?

For each piece of handkerchief, I hemmed the edges by first folding in the edges in to create a margin of 1/4″ and pinning them down with sewing pins. From there, I simply sewed the edges down and tied off the leftover thread.

From the three collar shirts, I originally started out with, I was able to make a total of 47 handkerchiefs. The breakdown is:

six – 9″x10″
six – 11″x11″
twelve – 10″x12″
six – 9″x12″
twelve – 10″x18″ (used for cloth napkins)
five – 8″x10″

Because the result of the shirts varied in size and shape, I decided to use the twelve 10″x12″ for napkins instead of handkerchiefs (Luckily I ended up with twelve in this size).

This was a fun upcycling project that took me longer than expected. Taking apart the shirts was the most time consuming, but it was well worth it in the end. Handkerchiefs don’t need to be perfect squares, but preferably 100% cotton. I hope this post inspires you to give it a try to making your own handkerchiefs as well. I’ve learned that although carrying around a handkerchief is an old tradition and I personally don’t see it practiced too often where I live, having one handy can be a lifesaver. Sometimes I’ll use it as a napkin when I don’t have my reusable cloth napkin available. And sometimes, when a stranger needs a kleenex, I’ll give my handkerchief for them to use. I have so many that I can give it away as well. It’s a gesture out of love and caring for humanity.

Clothing Edits

May 16, 2016July 27, 2019 / Yen-Van Tran / Leave a comment

05.16.2016

0800

Sometimes after I purchase a clothing item from the thrift store, I’ll come home to find out that some adjustments are needed. If the item is not exactly what I need, I’ll add design edits to the product with my own creative touch to get to the specific use that I was really looking for in the store.

For my light blue blouse, the button holes of the blouse were stretched larger than the buttons, so I had to shrink the size down. The buttons were able to unhinge without much effort. With a little bit of thread and hemming, my button holes were sewn smaller and fitted accordingly.

For my shoulderbag, the bag was designed with double straps but I’m a single strap kinda gal. I also hate trying to grab both straps, of any purse or handbag, each time I need to pick up the bag. This is what the bag looked like when I first bought it with both shoulder straps intact.

With a little bit of cutting and resewing, this is what my strap for my shoulderbag looks like now. I left the other two rings on the bag because I use them to hang my bag up in my car (that’s for an upcoming post about how I hack my car). I’ve done this with another bags, one of which is actually my camera bag. I use the extra rings to hook carabiners when I go on impromptu photo shoots. Idealy I want the top to be closed, and once I figure out a way to design it, I’ll add that in too.

Hand Sewn Repairs

April 20, 2016August 12, 2018 / Yen-Van Tran / 2 Comments

04.20.2016

0845

Although I do enjoy using a sewing machine to stitch together projects, I initially learned how to hand sew as a child. Hand sewing isn’t as daunting as it sounds, although it takes a little bit of practice, anyone can learn how to sew by hand. I hand sew items when I need a quick fix or a temporary fix. As a person who lives a zero waste life, repairing clothing helps in the fact that I can hang onto clothing that I still love to wear. Learning to repair items is essential to living a zero waste life for that fact that I simply don’t own that many items but also the fact that I don’t want to create more waste in the landfill.

Granted, once a piece of clothing or item is beyond repair, I will have to somehow repurpose it or it becomes trash. Even when I’m ready to donate my clothes and buy second hand clothes, I still prefer to repair the item before donation- there’s no reason that the next person should receive an unkept possession.

Sometimes I need to edit products for my daily needs so hand sewing is a better option than using a sewing machine. After I’m done, I simply add my leftover thread to my trash pile. Although the leftover thread is inevitable, it’s a better alternative than going out and making new purchases. I have quite a bit of leftover thread in my trash pile so I plan to find an alternative use for it.

I like to use the running stitch, hemming stitch and the backstitch. I favor the running stitch because it’s a simple stitch that is clean and easy to make. The hemming stitch is good for joining two layers of material together, when you want to hide the stitch seam. The backstitch is good for a more secure version of the running stitch. I use the backstitch on items that may have more weight on either side of the stitch, or when there s a chance that the stitch might come apart due to the materials being pulled in opposing directions.

There are many types of stitches to learn about and if you can master just one or two of them, you can save a great deal of time and money. Learning how to hand sew items is a skill that anyone can develop and learn, it is very easy once you understand how fabric is held together and why certain products use certain stitches. A lot of the times, picking out the right stitch is simple as just copying what the manufacture used on your product.

My Sewing Kit

April 18, 2016August 12, 2018 / Yen-Van Tran / 1 Comment

04.18.2016

0845

For my sewing kit, I use a 3-Tier Stainless Steel Food Carrier by To Go Ware. It is also known as a tiffin set, which is a nifty lunch box system that hails from India. For kits or sets that have many small items, I like to use these types of container systems due to the fact that these containers take up very little space and can be stored away quickly. This food carrier also came with a small cylindrical snack container as well.

In my top tier, I have a few extra zippers, some extra safety pins, my white LYRA Aqua Color Water-Soluble Wax Crayon, and a measuring tape. I also have a small coin purse that contains extra buttons. In my middle tier, I keep extra elastic bands and the small snack container, which holds my Pearlized Head Straight Pins by Singer. My bottom tier is where I keep my extra thread, sewing needles and my metal finger thimble. I usually keep only three different colors of thread, which are black, white and grey. I only keep these colors on hand for the fact that I can match pretty much any sewing stitch to any one of those colors.

In addition to the 3-Tier Stainless Steel Food Carrier, I also have a pair of 8″ Knife Edge Dressmaker’s Shears and a seam ripper. This sewing kit is used for mostly hand stitching and repairs. I do have a sewing machine that I borrow and that comes with its own set of supplies as well.

Knowing how to stitch and repair is essential in the health and life of my clothes. I prefer to repair my clothes instead of going out and replacing it with a new piece because each piece that is in my wardrobe is very special to me. Even when I decide to replace a piece of clothing, I still want it to be in good condition for the next owner. I never understood how much sewing would become a part of my clothing maintenance, I always just considered that keeping my clothes clean was good enough. Knowing a few types of stitches will save you a lot of frustration and money in the long run.

DIY Reusable Cloth Produce Bags

March 7, 2016August 12, 2018 / Yen-Van Tran / 5 Comments

03.07.2016

0800

Materials:

Bedding flat and fitted sheets
Bedding pillowcases
Shoelace/rope to use as drawstrings for the bags

Tools:

Sewing machine
Sewing kit

I use old bed sheets and old pillowcases to make produce bags with drawstrings to close the top openings. For this project, I used four pillowcases and two bed sheets. The weight of each piece of sheet varies in thickness, so I know that the tare weight will differ. This project does take a little bit of time, but the payout is immensely satisfying.

To size them up, I first divided a pillow case into quarters and I use extra shoelaces to make the drawstrings. I like to have at least two different sized bags so that I can use one size for my staple bulk shopping and the others to be used for standard bulk shopping. The pillowcase that will be divided into quarters would be the smaller size and I would half another pillowcase to be the larger bag template. I only need four large bags so the rest will be the standard bulk bag size.

The easiest and quickest way to finish this project in a short amount of time is to first measure out the size of each fabric piece, but measure out the pieces so that the fold of the fabric will be on the left or right side of the rectangular template. The reason why I recommend this is that when you sew, you can make one continuous stitch line without ending. If you create the fold of the fabric on the bottom, you have to sew both sides with separate stitch lines. Understandably, if you end up with very linear fabric pieces once you measure out your sheets, having two stitch lines will be inevitable. Keep in mind, the top is left alone for the drawstring pocket.

I usually measure the pocket for the drawstring at 1/2″ width and I pin it in place using ball head straight pins. I then sew the pocket for the drawstring and leave the ends open for the drawstring to be fed through. Then for each fabric piece, I fold the opening edge and bottom edge in about 1/2″ and pin it with a few ball head straight pins. You can also fold this hem over once more to secure the hem as well. Once all of the bags are sewn, I tie off all of the thread ends so that the ends don’t dangle and get caught up in the washing machine. Then I take each bag and feed the drawstrings through each pocket using a small safety pin. Once the drawstrings are fed through their pockets, I tie off the ends so that the drawstring won’t slip out.

Because I measured out my fabric into two basic sizes, I take one bag of each fabric type and size and bring it to the grocery store to record the tare weight. My tare weight for my standard bulk bag is 0.07 lbs and for the larger bag it’s 0.12 lbs. I usually write my tare weight towards the top of the bags due to the fact that cashiers tend to look for twist ties there. However, don’t write the tare weight too close to the very top of the bag, being that once you close the bag opening with the drawstring, the writing gets somewhat lost in the folds of the bag. I usually write the tare weight about 3″ from the top of my bags. I use LYRA Aqua Color Water-Soluble Wax Crayons to write on my bags and I bring them with me to record the PLU codes (Price Look Up codes) right on the bags.

From the four pillowcases and two bed sheets I used in this project, I made 57 bags. I also made two tiny little bags from the leftover fabric pieces, because I really didn’t want to add it to my trash bin. I hope this post helps for those who are looking to make your own produce bags. This was a two day project and although I was exhausted after finishing it, I was beyond ecstatic when these bags were put to use. These bags are used everywhere around my house from using them for lunch bags, to containing my cat’s toys and even using them in the kitchen to keep items organized. So utilize that sewing machine and I hope you enjoy your new DIY bags as much as I do.