Sofa Armrest Organizer

October 14, 2019October 14, 2019 / Yen-Van Tran / Leave a comment

10.14.19

0600

Materials:

Two Curtains at 5′-10″ in length

Tools:

Sewing Machine
Sewing Kit

I have an extra set of curtains, which I didn’t want to use anymore. I decided to create a sofa armrest organizer with both curtain pieces. Both curtain pieces were 5 foot 10 in length, and 27 inches wide.

I wanted my sofa armrest organizer to sit at a certain height off the ground, but I also wanted the top half to also tuck underneath the couch cushion. I first measured how high off the ground I wanted my couch armrest organizer. Since I needed to hang it over the sofa armrest and then wrap back over the arm to tuck underneath the cushion, that left about 47 inches to tuck underneath the cushion.

I wanted to store books in the first organizer, which would be fairly heavy, so I needed a lot of the material to tuck under the seat cushion to hold it in place. I actually wanted the top part of the organizer to tuck underneath an entire sofa cushion width, due to the weight that would be applied.

FIRST SOFA ARMREST ORGANIZER:

When I measured out my first design, I wanted the pockets for my books to be 14 inches in height. I first hemmed all of the edges and then I folded one edge to create the 14″ tall pockets. I sewed around the edge of the folded piece (yellow arrows) and then divided the pocket in half, and sewed a dividing line down the center to create two tall pockets (red arrow). These pockets will be able to hold my books and paperwork that I’m currently working on. I wanted my pockets to be a bit taller than the standard paper size (8.5″ x 11″), due to the fact that I knew the width of the pocket might eat up some of the height. I also wanted to be able to hide my books and paperwork, so my pockets wouldn’t look like they were overflowing with paper.

To attach the sofa armrest organizer, I removed the couch cushion on the side of the couch, located how high I wanted to hang the organizer, and then replaced the couch cushion. Since the top half of the fabric organizer is tucked under the couch cushion, it stayed in place.

SECOND SOFA ARMREST ORGANIZER:

I also wanted to create a second design, which would have smaller pockets for smaller items. My second design would have 10 inches in height for the books, and 6 inches for smaller objects.

Using the same sewing method as the first design, I hemmed all of the edges of the fabric material, and then measured 16″ of material at one end. I folded up the 16″ material, sewed along the outside edges of the tall pocket (yellow arrows), which created a giant 16″ tall pocket.

I then took the bottom 6″ of the pocket and folded it up, to create a shorter 6″ pocket at the bottom. This 6″ tall pocket also helped create the 10″ pocket behind the smaller pockets. I then sewed on both of the side edges of the fabric piece (red arrows) and then sewed a dividing line (blue arrow) to create a total of four pockets for this design. I sewed the edges of this design, all the way to the top of the pocket to reinforce the side edges.

Using the same method as the first sofa armrest organizer, I located where I wanted the organizer to hang on my armrest and I tucked the top half of it under the couch cushion on the end.

Since these sofa armchair organizers are made of fabric material, I can toss them into the washing machine and wash them easily. I can also fold them up and put them away if I don’t need to use them. Fabric is my favorite material to work with since it can be taken apart and reused multiple times. I love that it is a very flexible medium and I was able to put my old curtains to good use.

Mending Items Versus Buying Items

July 29, 2019August 5, 2019 / Yen-Van Tran / Leave a comment

07.29.2019

0600

If you read about my Fast Fashion post, it relates to this one. If not, please go check it out. Even though I do by thrift store items, I will still mend an item to save it from a donation. Sometimes I will mend my items and then I donate the item. For instance, I found an old shirt at my aunts house. It had a few holes in it but overall, I liked the color and I didn’t mind the cut of the shirt. The color went perfectly with my color palette for my capsule wardrobe, so I really wanted to save it from being donated. I just needed to mend the shirt, so it would be decent to wear.

Now I have an almost new shirt.

Whenever I upcycle clothing, I always keep scraps of the leftover clothing item. In my Reusing Fabric and Thread blog post, I wrote about keeping my fabric scraps in a small bag. I literally have a bag of scraps. I love fabric, and the use of fabric in different products, (depending on the thread count, material, and the way fabric is sewn together,) can be a very durable material.

Some shirts have higher thread counts, which lends them to become excellent candidates to upcycle into grocery bags, or other heavy duty bags. The smaller scraps that I keep, I always try to find a use for them. Whether it’s going to be upcycled into a small project or large project, the one thing I can count on is that I can throw it in the washing machine to clean it.

If I had a choice to make, with picking and choosing reusable products, I prefer to choose items that I can wash easily. I don’t like to buy items which require a special cleaning method or liquid to clean. I like to sew and mend items, because the product that I’m usually mending, only needs to be washed with soap and water.

If you reflect on the products that you use daily, the majority of them are probably sewn together: your clothes, handbags, wallets, car seats, bedding, upholstery, etc. Knowing how to sew and understanding how to repair fabric products has been a life saver for me. I actually learned how to sew by hand, and didn’t learn how to use a machine until years later.

Learning how to mend items can save you money, time and stress. Even the simple act of sewing on a button is helpful. You can save a simple dress shirt, like I did, from sending it to a donation station.

Handmade Handkerchiefs

October 3, 2017August 12, 2018 / Yen-Van Tran / 2 Comments

10.03.2017

0600

Materials:

A few shirts (I used collar shirts for the fact that I like this material and these were extra shirts I found)

Tools:

Sewing machine
Sewing Kit

So there was a recent heat wave that spread through California, and it was HOT. I only had two handkerchiefs and those were being used up fast. I knew I needed more. Although I could have bought a set of twelve for about $5.00. I thought making my own would be more fun.

I found some old collar shirts, that had never been worn (and would never be worn) to make into handkerchiefs. Since these shirts were dress shirts with a tight thread weave, I knew these would be durable over time and the material was still 100% cotton.

I had no idea how many handkerchiefs I would produce from these three shirts so I was curious about the end product. Most handkerchiefs are square shaped and I knew these would vary in size, so I kept that in mind. My current handkerchiefs were 10″ x 10″.

First I took apart each shirt. this meant I had to tediously unravel each thread that made up these shirts. This took awhile to do since certain parts of the shirts had double layers. I also needed to be able to look at each piece of each fabric that made up these shirts. I needed to be able to size up my handkerchief template accordingly.

Once I took apart all of the fabric pieces that made up my shirts, I started to map out 10″x10″ sections on the fabric. There were pieces that I knew I could not use, such as the cuffs and collar of the shirts. For these pieces, I put them aside for future projects. Parts of the shirts such as the Yoke, would have to be sewn together to create enough surface area for a handkerchief.

Due to the shape of each piece of fabric, I wasn’t able to make perfect 10″x10″ squares. Instead, the shape of the fabric pieces gave me some very unique shapes to use for handkerchiefs. Who said a handkerchief had to be a perfect square anyway?

For each piece of handkerchief, I hemmed the edges by first folding in the edges in to create a margin of 1/4″ and pinning them down with sewing pins. From there, I simply sewed the edges down and tied off the leftover thread.

From the three collar shirts, I originally started out with, I was able to make a total of 47 handkerchiefs. The breakdown is:

six – 9″x10″
six – 11″x11″
twelve – 10″x12″
six – 9″x12″
twelve – 10″x18″ (used for cloth napkins)
five – 8″x10″

Because the result of the shirts varied in size and shape, I decided to use the twelve 10″x12″ for napkins instead of handkerchiefs (Luckily I ended up with twelve in this size).

This was a fun upcycling project that took me longer than expected. Taking apart the shirts was the most time consuming, but it was well worth it in the end. Handkerchiefs don’t need to be perfect squares, but preferably 100% cotton. I hope this post inspires you to give it a try to making your own handkerchiefs as well. I’ve learned that although carrying around a handkerchief is an old tradition and I personally don’t see it practiced too often where I live, having one handy can be a lifesaver. Sometimes I’ll use it as a napkin when I don’t have my reusable cloth napkin available. And sometimes, when a stranger needs a kleenex, I’ll give my handkerchief for them to use. I have so many that I can give it away as well. It’s a gesture out of love and caring for humanity.

My Cat Is Not Zero Waste

September 21, 2016August 14, 2018 / Yen-Van Tran / Leave a comment

09.21.2016

0800

Trying to create zero trash for my cat is almost impossible. I’ve tried, but due to some medical conditions, it’s virtually impossible. I have a male cat and he was neutered when he was younger. Unfortunately, male cats who are neutered, are more prone to urinary tract infections and therefore, require special diet food that has a low sodium content. Also, in order for him to not develop another urinary tract infection, he needed fresh water constantly. We bought him a small drinking fountain which he helped himself to. These two requirements produced empty tin cans of cat UTI management food as well as charcoal filters.

As he aged, he developed Diabetes and requires insulin shots twice a day. This required insulin medication as well as insulin needles. He’s a large cat, but he’s always been a large cat so weight gain was his genetic default. Lucky for us, he’s always been an indoor and outdoor cat, so he always used the backyard as his giant toilet. But with him being an indoor and outdoor cat, he required flea medication. I’ve been asked “Why don’t you just make him an indoor cat? It would cut back on the flea medication trash that you produce.” But forcing an animal to stay inside when we clearly have outdoor roaming space for him seemed unnatural to me. I wanted him to roam free and go play outside when we weren’t home. So the diabetes and flea medication produced tin cans of glucose management food, insulin needles, insulin medication and the flea applicators.

Over the years, he also got into a few fights with other cats or raccoons that roamed the neighborhood. For those special occasions, he required medication and sometimes even surgery which produced trash as well. I usually return the pill bottles and jars to the veterinarian so they can dispose of it. I’m lucky that I live in an area that allows free medical waste dumping, and even if I didn’t, I know my veterinarian will collect the medical waste from his patients for a small fee.

As for toys, he never loved to play with a lot of toys. In fact, he really only likes his catnip pillow, shoelaces and metal chain necklaces . I had a catnip plant that I grew for him awhile back and once in awhile, I would dry the catnip leaves and compost the old catnip. I would then refill his pillow with new dry catnip. Unfortunately he liked it so much that he would lay on it and eventually crushed the life out of it. That too went into the compost bin. I’m lucky that he’s easily entertained. He also never wanted his own bed, he always just adopted any place in the house to sleep.

Facts:

Urinary Tract Infection Medical History = Prescription Diet c/d canned food & Filtered water with charcoal filters
Diabetes II Medical History= Glucose Management m/d canned food, insulin needles, insulin medication
Indoor & Outdoor cat = Advantage Flea Medication BUT no litter box
Entertainment = Catnip pillow, but I refill the catnip pillow with fresh catnip. He just likes to play with shoelaces and metal chain necklaces.

So the recyclable items that I do produce are the tin cans of UTI food and diabetic food. His insulin medication, insulin needles and other medications are also recycleable, but considered medical waste recycling. The charcoal filters and advantage flea medication are the items that do end up in the landfill. I actually have a separate jar of trash that comes from owning a cat. He also no longer uses the water fountain that used the charcoal filters, he requests fresh water from the faucet when he’s thirsty with a drawn out meow.

Trying to own a pet and not produce trash from them is quite difficult. I know this much, to take on a pet is a great amount of responsibility and it is not a simple responsibility to ignore. I am not a veterinarian and I do not know what nutrients he needs and the sufficient amount of each nutrient and vitamin, therefore I do not attempt to make cat food on my own. He has very few toys, only wants his catnip pillow, which I will stuff with fresh catnip and compost the old catnip.

I started this journey almost five years ago, so I’ve compiled a nice amount of Advantage Flea Medication applicators for cats as well as charcoal filters. He stopped using the water fountain about three years ago, so he hasn’t produced anymore trash from that. He probably won’t last through the end of this year, but it’s amazing to see how much owning a pet can add to your trash collection. Once you lay it all out and calculate the amount of trash that’s produced, it’s an eye opening realization of what you’re contributing to the landfill.

My Sewing Kit

April 18, 2016August 12, 2018 / Yen-Van Tran / 1 Comment

04.18.2016

0845

For my sewing kit, I use a 3-Tier Stainless Steel Food Carrier by To Go Ware. It is also known as a tiffin set, which is a nifty lunch box system that hails from India. For kits or sets that have many small items, I like to use these types of container systems due to the fact that these containers take up very little space and can be stored away quickly. This food carrier also came with a small cylindrical snack container as well.

In my top tier, I have a few extra zippers, some extra safety pins, my white LYRA Aqua Color Water-Soluble Wax Crayon, and a measuring tape. I also have a small coin purse that contains extra buttons. In my middle tier, I keep extra elastic bands and the small snack container, which holds my Pearlized Head Straight Pins by Singer. My bottom tier is where I keep my extra thread, sewing needles and my metal finger thimble. I usually keep only three different colors of thread, which are black, white and grey. I only keep these colors on hand for the fact that I can match pretty much any sewing stitch to any one of those colors.

In addition to the 3-Tier Stainless Steel Food Carrier, I also have a pair of 8″ Knife Edge Dressmaker’s Shears and a seam ripper. This sewing kit is used for mostly hand stitching and repairs. I do have a sewing machine that I borrow and that comes with its own set of supplies as well.

Knowing how to stitch and repair is essential in the health and life of my clothes. I prefer to repair my clothes instead of going out and replacing it with a new piece because each piece that is in my wardrobe is very special to me. Even when I decide to replace a piece of clothing, I still want it to be in good condition for the next owner. I never understood how much sewing would become a part of my clothing maintenance, I always just considered that keeping my clothes clean was good enough. Knowing a few types of stitches will save you a lot of frustration and money in the long run.