DIY Thumb Loops In Sweater Sleeves

11.18.2019

0600

So this blog post is a personal life hack of mine. When I work out, I like to wear sweaters. Now, these sweaters are not always athletic sweaters, but simple sweaters that I buy just to wear on a day-to-day basis. I like to go running in these sweaters because they’re comfortable and warm. However, when I go running with these sweaters, the sleeves tend to run up my arm. I prefer the sweaters to cover my wrist and not bunch up when I’m running. I like the running sweaters that are designed with thumb loops, but they tend to be more expensive as well. Since I love my sweaters that I wear day to day, I decided to create my own thumb loops for my sweaters.

It’s a very simple process to create these thumb loops. First, I laid down my sweater where the sleeve lay flat on the table. I located the center line of the sleeve, and then chose to locate my thumb loop on the bottom half of the sleeve, but on the cuff of the sleeve. I found the center line of the bottom half of the sleeve, and I decided to locate my new thumb loop there.

When I wear my sweaters, my hand falls naturally to my side, in which my thumb faces towards the front of my body. This is why I located the thumb loop on the bottom half of the sleeve.

I wanted my thumb loop to be 1 inch in length and about half an inch from the bottom of the sleeve cuff. Using scissors, I cut a small slit that was 1 inch in length.

For my right sleeve, I used the same process as I did with the left sleeve. I located the center line of the right sleeve, and then located the center of the bottom half of the sleeve. I cut a one inch slit that was half an inch away from the bottom of the sleeve cuff.

I removed my extension table in order for the sleeve to fit underneath the presser foot of the machine. I slid the left cuff over the needle plate and started to sew the edge of the thumb loop. I used a tight zigzag stitch, so the fabric would hold up during washes and use. Since I knew that these thumb loops would go through a bit of wear and tear, I used the back stitch lever to create a strong and permanent attachment at the ends of the thumb loops.

The back stitch lever created the heavy and thicker starting points and end points of the outline of the thumb loops.

I flipped my left sleeve inside out, and continued to outline the other side of this thumb loop. I used the zigzag stitch again and used the back stitch lever so both ends of the opening would have an even reinforcement, of the thumb loop.

When I turned my sweater inside out, the thumb loops were finally finished being created. I use this hack on both of my sweaters, so now the sleeves won’t run up my arms when I workout.

This is a really simple hack for an issue that I dealt with on a daily basis. Although I know my thumbs will stick outside of my sleeves, when I run,they don’t get too cold. Sometimes I will run with my running gloves when the weather drops too low, so technically, my hands are still warm. Some people prefer to not have the thumb loops, but I like to keep my wrists covered when I run. This hack took less than 30 minutes to create and finish, so it didn’t take much time out of my day at all. I hope this hack will inspire other hacks that you might be needing in your life.

Mending Items Versus Buying Items

07.29.2019

0600

If you read about my Fast Fashion post, it relates to this one. If not, please go check it out. Even though I do by thrift store items, I will still mend an item to save it from a donation. Sometimes I will mend my items and then I donate the item. For instance, I found an old shirt at my aunts house. It had a few holes in it but overall, I liked the color and I didn’t mind the cut of the shirt. The color went perfectly with my color palette for my capsule wardrobe, so I really wanted to save it from being donated. I just needed to mend the shirt, so it would be decent to wear.


Now I have an almost new shirt.


Whenever I upcycle clothing, I always keep scraps of the leftover clothing item. In my Reusing Fabric and Thread blog post, I wrote about keeping my fabric scraps in a small bag. I literally have a bag of scraps. I love fabric, and the use of fabric in different products, (depending on the thread count, material, and the way fabric is sewn together,) can be a very durable material.

Some shirts have higher thread counts, which lends them to become excellent candidates to upcycle into grocery bags, or other heavy duty bags. The smaller scraps that I keep, I always try to find a use for them. Whether it’s going to be upcycled into a small project or large project, the one thing I can count on is that I can throw it in the washing machine to clean it. 

If I had a choice to make, with picking and choosing reusable products, I prefer to choose items that I can wash easily. I don’t like to buy items which require a special cleaning method or liquid to clean. I like to sew and mend items, because the product that I’m usually mending, only needs to be washed with soap and water.

If you reflect on the products that you use daily, the majority of them are probably sewn together: your clothes, handbags, wallets, car seats, bedding, upholstery, etc. Knowing how to sew and understanding how to repair fabric products has been a life saver for me. I actually learned how to sew by hand, and didn’t learn how to use a machine until years later.

Learning how to mend items can save you money, time and stress. Even the simple act of sewing on a button is helpful. You can save a simple dress shirt, like I did, from sending it to a donation station.

Hand Sewn Repairs

 

04.20.2016

0845

Although I do enjoy using a sewing machine to stitch together projects, I initially learned how to hand sew as a child. Hand sewing isn’t as daunting as it sounds, although it takes a little bit of practice, anyone can learn how to sew by hand. I hand sew items when I need a quick fix or a temporary fix. As a person who lives a zero waste life, repairing clothing helps in the fact that I can hang onto clothing that I still love to wear. Learning to repair items is essential to living a zero waste life for that fact that I simply don’t own that many items but also the fact that I don’t want to create more waste in the landfill.

Granted, once a piece of clothing or item is beyond repair, I will have to somehow repurpose it or it becomes trash. Even when I’m ready to donate my clothes and buy second hand clothes, I still prefer to repair the item before donation- there’s no reason that the next person should receive an unkept possession.

DSC_4102DSC_4104

Sometimes I need to edit products for my daily needs so hand sewing is a better option than using a sewing machine. After I’m done, I simply add my leftover thread to my trash pile. Although the leftover thread is inevitable, it’s a better alternative than going out and making new purchases. I have quite a bit of leftover thread in my trash pile so I plan to find an alternative use for it.

DSC_3734

DSC_3737

I like to use the running stitch, hemming stitch and the backstitch. I favor the running stitch because it’s a simple stitch that is clean and easy to make. The hemming stitch is good for joining two layers of material together, when you want to hide the stitch seam. The backstitch is good for a more secure version of the running stitch. I use the backstitch on items that may have more weight on either side of the stitch, or when there s a chance that the stitch might come apart due to the materials being pulled in opposing directions.

There are many types of stitches to learn about and if you can master just one or two of them, you can save a great deal of time and money. Learning how to hand sew items is a skill that anyone can develop and learn, it is very easy once you understand how fabric is held together and why certain products use certain stitches. A lot of the times, picking out the right stitch is simple as just copying what the manufacture used on your product.

Types of Stiches