How I Organize My Jewelry

September 9, 2019September 27, 2019 / Yen-Van Tran / Leave a comment

09.09.2019

0600

So I’m a simple girl which means I have simple ways of organizing my life as well. Since I am a minimalist, I actually don’t own a lot of jewelry. So, I thought I would show you how I organize my jewelry.

When I was a kid, my necklace always became tangled, no matter how I seemed to store it. I didn’t really figure out how I wanted to organize my jewelry until later on. Parts of my jewelry organization was due to the fact that I didn’t have that much jewelry to organize when I get older. It actually really helps my life to organize less stuff than more stuff.

I thought I would show you how I organize my necklaces, bracelets, and earrings

For my necklaces I like to use a Velcro strap, in which all I have to do is grab the Velcro loop and my necklaces fall naturally in an organized fashion, due to gravity. I also use a Velcro strap to organize my bracelets. For some of my necklaces I like to use a binder ring, because the design gets caught on the Velcro, when I lift it up. But for the most part, I’ll use Velcro straps. I also like using the Velcro straps due to the flexibility that it allows. If I need more space, to organize my jewelry, it allows that need.

I use a Velcro strap to organize my bracelets. One of my bracelets is fairly wide in shape so I needed something that was flexible to it.

My earrings are organized a fairly special way. I never really had a clear way of organizing my earrings up until I just thought, “Why not just attach them to a piece of fabric?”. So that’s exactly what I did. I sewed a piece of extra fabric to the inside of my jewelry pouch, and I just attach my earrings to the fabric. I actually pre-punch holes using a pushpin something generic and I just attach my earrings to those pre-made holes. I like this design because of the fact that the earrings don’t get lost and the backing of the earrings are still protected by the extra piece of fabric.

The fabric piece flips out, to access the earrings easier. I also keep my extra earring backings on a small safety pin that’s attached to a ring. I have quite a few extra earring backings, so, I have quite a few safety pins on the ring.

I created an extra detachable fabric earring piece for traveling as well. This travel earring organizer is used when I need to use different backpacks or bags while traveling. It’s used for trips when I don’t want to bring my entire jewelry pouch.

I organize my rings in a similar manner, where I keep them organized on a small necklace chain. The necklace chain for my rings is kept with my other necklaces. It’s easy to lift up the necklace chain and have the rings fall naturally. When I travel, I will keep my rings organized on a carbiner, but most of the time, they stay on a necklace chain. They don’t get tangled, and they stay organized, due to the sequence I arranged them in.

So, that’s how I organize my jewelry. If I ever acquire more jewelry, or a bigger bag, I’ll likely use the same techniques and system that I have for this bag. Hopefully, some of the methods I’ve shown you here, might spark and idea for your organization system.

Plastic Packaging In The Kitchen

July 8, 2019July 8, 2019 / Yen-Van Tran / Leave a comment

07.08.2019

0600

Even when I buy items in glass jars because I can’t find a refillable version of it, I always end up with these plastic shrink bands. It seems that zero waste is never an absolute. Sometimes when I do buy produce that is free plastic packaging, I’ll still end up with rubber bands or twist ties. The good thing is I can actually reuse those items, but it’s preferred that I don’t have to.

Most of my dry goods are sold in bulk bins, so I am lucky that I have the privilege to buy package free dry goods from bulk items.

During the process of transitioning over to a zero waste lifestyle, I knew that I would end up giving up a lot of foods that I enjoyed. I personally love potato chips to snack on, but it was one thing I knew I had to give up, since the packaging wouldn’t fit my zero waste lifestyle. I gave up a lot of snacks such as packaged cookies, packaged crackers and packaged candy. There were alternatives to these packaged items, such as certain bulk options.

When I realized I had to give up certain foods, I also sought out alternative food substitutes. There are good substitutes out there, but sometimes, seeking out the alternatives require more work than expected. Once in awhile I will indulge in a packaged food, and then that packaging will get added to my pile of trash for that year. During my journey, I did come across a company called TerraCycle. They team up with certain companies who participate in different recycling programs with TerraCycle. These companies offer recycling programs through TerraCycle, in which customers who purchase their products, can join their recycling program, and send back the packaging to the company for free. It’s an option, and the program change frequently, so checking their website updates is helpful.

I’m extremely lucky to have local bulk grocery stores, who provide the option of bulk shopping, so I can continue this lifestyle. Only once in awhile, I’ll need an item and the glass jar will have the plastic shrink band on it. If I can, I try to only need and use items that are only sold in bulk.

Backpack Hacks

August 15, 2017April 26, 2020 / Yen-Van Tran / 4 Comments

08.15.2017

0600

With all of my backpacks that I have ever owned, I hack them the exact same way as I always have. Going back as far as middle school, I always had to hack my backpacks. It was my way of customizing my carrier to my exact needs and over time I would edit it as my needs changed. Within each compartment I always created some type of hanging or attachment mechanism to hang my water bottles, extra bags within the compartments or hang something I needed access to immediately. most of the time I hung items that I needed access to so that those items weren’t at the bottom of my bag, where I had to go digging around to look for them.

Front of the backpack

I always attach extra reflectors so that in low light, vehicles or any type of light can bounce off of my backpack and I can be visible. These reflecting straps are for bikers, but I took two of the straps and weaved them through my exisitng strap set up.

For all of my zippers that open to significant compartments, I always sew a section of the zipper, so it limits the access to that compartment to only one direction of movement for the zipper. I prefer to only have access in one direction for the zipper movement so it’s easier to watch over and maintain. I also attach metal rings right below the point of the sewing block (through the exposed zipper tape) so that I can use this ring to lock my carabiners from the outside but to also hang items on the inside of the bag.

On the inside, I hook extra interior metal rings with carabiners to the exterior rings that are popping through the tape so I can hang items on the inside. I’ll hang my water bottle from these interior rings (when my external water bottle pocket has my coffee tumbler in it) or small bags so I can keep items separated in the same compartment. These interior rings are there for anything that needs to be hanged or utilized.

Sides of the backpack

I also sew blocking for my smaller compartments and create a locking system for these pockets as well. For the smaller pockets, it really just depends how and where you want to secure the pocket. I chose to insert an extra ring so that I could attach an extra carabiner to it and lock the zipper with it.

For my external water bottle pocket, I usually take one of the extra backpack straps (that I trimmed off) to create a safety strap for the external water bottle pocket so that it can hold taller water bottles more securely. There have been a few incidents where my external water bottle pocket wasn’t deep enough and due to the fact that I had so much stuff in my backpack, my water bottle managed to get squeezed out of the pocket.

Back of the backpack

I usually trim the extra strap slack that comes with the backpack straps. I don’t like any loose hanging straps so I will measure how high I want to carry my backpack and trip, then hem the straps accordingly.
For my backpack straps, I like to keep my smaller items very close to me. So I will attach some type of pocket (large enough to fit my “wallet” items and my cell phone) to the front. This backpack didn’t come with a pocket for those types of intimate items.

I also ALWAYS, ALWAYS attach an extra carabiner to the other strap, so I can hook my keys onto my strap quickly.

So there you have it, those are the hacks I made for this backpack. This is my day to day back pack, so I’ll run to the store or go hiking with it. I do have another hiking backpack that’s a 65 gallon capacity for traveling and I’ve hacked that accordingly as well. Hopefully you may see a hack i described here that you would like to use on your own backpacks or carrying bags that you may want to use.

Creating A Locking Mechanism For My Carabiners

May 16, 2017August 12, 2018 / Yen-Van Tran / 1 Comment

05.16.2017

0700

I’m a big fan of carabiners. I have all different types and designs, however, I tend to favor the Asymmetrical D-Shape. On a whim a few years back, I bought two S-Binder carabiners. I really liked this design because the items I would place on the bottom half of the carabiner were separated from the top half. The top lever was the lever that I would use to hook and unhook the carabiner to other objects.

This also lead to an issue with the way in which I used it. Each time I would wrap my hands around the carabiner to press open the top lever, I would inadvertently press my palm against the bottom lever and the objects had a very good chance to slide out. This involuntary action happened a few times and I had to come up with a quick solution.

First, I wrapped a small piece of Velcro around the bottom lever, but over time, the Velcro started to become weaker and would become unattached, which left the end flap of the Velcro unattached. I knew I had to come up with a more permanent solution. I knew other carabiner brands sold their Asymmetrical D-Shape carabiners with locking mechanisms or had an external accessory that helped lock their levers in place. I had to make my own locking mechanism in order for me to not drop my keys all over the place.

I took a old piece of an iron on elbow patch (I had bought a set years ago and never used them all up), and I cut the length to the distance that it would take to cover the lever and half of the basket of the carabiner. (If you don’t know where the ‘basket’ is, I labeled all of the parts of a carabiner in the first image).

With a few sewing needles, I marked the locations of the fabric of which I would have to sew the fabric together. I removed the fabric from the carabiner and sewed it up. I needed to create a snug fit for the locking mechanism so that the fabric didn’t move easily when in use. When I sewed my second locking mechanism, I sewed it a little too snug, but with fabric, you have a slight chance to stretch the length and width of any product due to the material. This was material for iron-on elbow patches, so it was a very, very slight stretch .

Once I was finished sewing both the locking mechanisms, I slid the pieces on, moved my key rings over them and then slid it back over the levers. It’s a simple solution to a very basic tool I use everyday.

If you use any other kind of fabric, perhaps 100% cotton, you may have to sew it a little tighter because cotton tends to stretch more. And, you may want to extend the length of the locking mechanism so that it can’t slide back and forth on the basket as easily. The idea is to make the fabric slight “stuck” on the spine of your carabiner. If it has a hard time sliding around the basket, then it most likely won’t slide around when in use.

I hope this might give any of you some ideas as to how to approach design problems such as this one. Happy sewing and don’t loose those keys!

A Climber’s Guide To Carabiners

Essential Design Tools

March 28, 2016August 12, 2018 / Yen-Van Tran / Leave a comment

03.28.2016

0900

When I mention my essential design tools, I’m talking about tools I keep around in order to hack an object or product. Whether it be the way that the product is used, is placed in a location or creating more than one type of use for it. These alterations are never designed to compromise the integrity of the product itself unless I really want to step into that realm. The reason why I don’t want to alter the integrity of the products too much is because by living a zero waste life, I must be able to make multiple products be able to be used for multiple functions. This idea of versatility with every product I invest in, is always in the back of my mind with every purchase or design hack.

Supplies I keep in order to fix or hack day to day situations and circumstances around the house:

Shoelaces and Rope
S-Hooks
Metal Binder Clips
Velcro straps
Carabiners
Metal Rings

All of the tools I choose to keep are reusable and are made of durable material. I do prefer metal or stainless steel material because these tools can be manipulated into the shape of a loop. My favorite tools out of all of these are the carabiners and metal rings. Carabiners are strong, safe, secure and easy to use. Their closed loop design and locking mechanism was the design feature that caught my attention years ago. And due to the fact that these carabiners can be used repeatedly, the investment will pay off on its own. Metal rings can be used anywhere to create another secure loop for hooking any carabiner to it. These two tools coincide with one another when I use them.

I also favor rope as well. If you can find extra rope that’s braided together, then you’ve found gold in my opinion. The strength of braided rope combined with the knowledge of knots is essential. Also, rope has a soft flexibility to it where it can be use with clothing alterations, products and repairs. It’s flexible enough to create tension for a blanket fort, yet can be turned into a lasso to help save a drowning adult in a roaring rapid.

Metal binder clips and velcro straps are used as temporary grips for a group of anything that need to be bundled together. Although metal binder clips are limited in the width of the object they’re gripping, the metal material is still strong enough to retain it’s own shape. Velcro straps can be used for larger bundles and can also be linked together to extend their capabilities around larger bundles.

S-Hooks are simply used when I need to hang something up without needing to drill a hole into another material. It is my go to tool when I have to deal with an object that needs support due to gravity more so than any other issue.

There are parameters to living a zero waste life, but one has to live within those parameters and still meet their own needs. Some might say that keeping supplies such as the ones I’ve listed above is excessive, yet, I reuse these design tools repeatedly. If you notice that you constantly reuse certain tools or constantly go out and buy the same supplies, I’m betting that you’ve stumbled upon your own design tools. Invest in supplies that are versatile and are produced with durable materials, and they will consistently give back to you.

Alternative Screen For Doors

March 16, 2016August 14, 2018 / Yen-Van Tran / Leave a comment

03.16.2016

0830

Materials:

Fabric shower curtain
Shoelace
Metal rings
Binder Clips
Nails (thin enough to fit through the holes of the shower curtain)

Tools:

Hammer

As Spring is rolling in and Summer is around the bend, I wanted to show a design hack that doesn’t require much commitment. I have a small balcony that leads up to my area and it doesn’t have a screen to keep out pesky bugs. I’m a fan of fabric shower curtains for the fact that I like to toss them into the washing machine and hang them up to dry. I have a few fabric shower curtains that I keep around for design hacks such as these.

A shower curtain fits almost the height of a standard door frame. For anyone who lives in a space where they cannot impede on the design structure of the space (ie. due to tenant contracts via landlord), this seems to ease the pain of when your area is overheating during the hotter season. I took 2 tiny nails and hung up one of my fabric shower curtains. Make sure that the nail on the end where the hinge of the door frame is located, is about 6″ from the edge of the frame. This is because when you swing the door open, you have to take in to account the width of the door itself. The curtain must hang easily and without tension as the door is open at 90 degrees. On the door handle side, try to use a binder clip to extend an arm to hook it to any lock hinge with an S hook, or you can simple place a push pin in the wall and hook the binder clip handle to it.

The nail holes are also a simple fix if you decide to move out and need to patch up the holes with caulking. On the open side of the shower curtain I clipped a metal binder clip and on the hinge side of the door, I looped a metal ring. The side with the metal loop tends to wedge perfectly in between the door and the frame on the hinge side. However, when placing the metal ring, try to wedge it horizontally. I actually use a folded up washcloth to wedge under the door to hold it open too.

On the bottom of the curtain, if you want some weight to the curtain, you can simply attach some metal binder clips with a key chain on each (I know you guys have these key chains lying around somewhere). If you don’t have any key chains, try to find a small weight to hang from the binder clips. The reason why I use binder clips in this design hack, is because I don’t want to sacrifice the integrity of the shower curtain itself.

If you still want the curtain to be lower, you can take some extra shoelace/string/rope/twine and create an extension for the top like this:

Because the nails are on the top of the door frame, you have about three inches to give in the distance that the curtain starts to hang. If you add these extensions on, the curtain should fit right under the door frame. But if you do add these extensions, you will need to add another nail so that the middle of the curtain isn’t loose. So it will look like this:

My extensions seem to be enough for me when it comes to hanging my shower curtain and the design on the shower curtain gives a little bit of illuminated art during the day. I don’t add the binder clips or the key chains at the bottom of mine during the summer. I think I like the drastic movement it makes with the wind when it flows through my space. I hope this design hack helps for any of you who may be living in apartments or homes that get uncomfortably hot during the summer. It’s a way to make your own screen without destroying the integrity of the architecture and design or paying for a brand new screen.

Needed A Phone Holder For The Car

February 15, 2016August 12, 2018 / Yen-Van Tran / 2 Comments

02.15.2016

0800

Materials:

Shoelace
Carabiner
Metal rings
Box that would fit my cell phone
Electrical tape (try to match the same color as the new cell phone holder)

So I made this phone holder in 2011, it was right around the time when the statistic of distracted driving started becoming an issue. Quite frankly, I don’t text and drive, I enjoy driving when I’m driving. The idea of getting pulled over for a ticket is also not one of my goals. However, I still used my GPS map when I drove to new locations. I did research different types of phone holders for cars and I wasn’t happy with any of the designs.

I like to keep surfaces clean, mostly because I hate to move things when I wipe down a surface, and then move them back. The mounting units that came with the phone holders would either have a set holder that would attach to surfaces or they were movable. There was the option of using the devices that had a suction cup to stay attached to my windshield, but if my windshield temperature got too cold, it would slowly release the suction and the entire device would fall down.

I love the Law of Gravity. I really do. I utilize it in almost everything I design or make. This was my solution to my problem.

I used the black case that my 1 TB external hard drive, and used rings to hang the case from my vent system in my car. I cut a rectangular hole on the bottom so that I could attach the charging cord. I cut out a rectangular hole so that I could see the screen when I drove and I used electrical tape to clean the edges. (I use electrical tape when the environment calls for some sort of heat fluctuation.) The holder is slightly bigger than the phone, but I figured, iPhones are getting larger with each generation so why not.

I have an old car but I still love looking at this contraption. It’s just amusing to see my solutions. It’s not the prettiest iPhone holder, nor do I think it would sell, but I didn’t go out any buy anything and it still works to this day.

Always Consider Gravity

February 10, 2016August 12, 2018 / Yen-Van Tran / 3 Comments

02.10.2016

0830

When I create a solution for any situation in my life, I always, always consider gravity first. Being that I also live in the Bay Area, items tend to fall when earthquakes occur. My solution to this issue is hanging everything. I keep extra shoelaces, metal rings, and carabiners around for this very reason.

I also like to keep my floor clear because when I run around with my microfiber dust mop, I don’t like to move things. In other words, items wont be on the floor to get in my way. This rule applies for any surface area in my home as well. I’m simply not a big fan of dusting. I will dust, but it has to be a once over type of effort, for me to move items, then dust, and then place items back feels like a waste of time and effort. Multiply that task for each week of the year, and the wasted time will add up.

I hang many items around, but these are a few of the examples. I hang my mirror on my door along with a pencil bag that holds my dry erase pens to write on the mirror with. I actually draw a calendar on my mirror for the fact that I know I wont miss it when I check myself in the mirror. (It also helps because I don’t like to buy paper calendars.) I use a laptop and I hate the sound of my transformer box dragging across my hard wood floor, so I made a denim pocket out of an old pair of jeans to hang it up. I also cut a hole on the other side of the pocket for the other cord to poke out of. My drafting table ruler is also hanging next to it since I now use my drafting table as my desk and it was getting in the way. I have a 3-tier basket which I place items that would normally find their way onto the surface of the kitchenette counter, and I even have other items hanging from that was well.

Using shoelaces, I hang my memory board up to cover the window on my door. There was a small gap when I hung it up, so I used a fabric napkin to simply cover the opening. I’ve always hung up my kitchen timer as well. I used a magnet clip and simply took a hook screw and attached it to the top, and not screwing it too far in as to hit the bell on the inside. My bookshelf is also right next to my desk (this desk has no drawers) so I hang up my pencil holder as well.

These are just a few items that I hang up. Hanging up items is an easier way to maintain my space and I know that if an earthquake was to ever occur, these items wont fall. On top of that- dusting is a breeze.