Quick T-Shirt Pocket

09.07.2018

0600

Materials:

  • One T-shirt (or two, but definitely at least one)

Tools:

  • Sewing machine
  • Sewing Kit

DSC_0194

 

Living a Zero Waste life means that I create simple solutions for simple problems since I don’t want to go buy anything new or seek  out another possession to take care of.

So I usually carry my phone around with me when I’m doing certain types of household tasks. These tasks don’t require a lot of vigorous movement, but I’m definitely moving around. A lot of the time it’s annoying to remember to carry the phone from one place to another when I’m running around the house and if my hands are dirty, I really don’t want to touch my phone. I needed a quick solution where I could carry the phone along with my keys without much hassle. I didn’t want to go out and buy a separate cell phone holder strap that would wrap around my arm. I have one for workouts, and that strap holds down my cell phone securely since I’m running. But I just needed a quick solution where I could carry around my phone and my keys easily for a few hours.

My quick solution was to see my t-shirt sleeve in half and create a pocket. my t-shirt sleeves are usually longer than I need them to be. This gave me the extra material to work with. I simply folded my sleeve in half and pinned the sleeve all the way around.

DSC_0197DSC_0201

Depending on the width of your cell phone, measure that distance out on the top of the sleeve. Just make sure you divide the width of your phone in half and center the opening on the top of the sleeve.

DSC_0203DSC_0205

For the other sleeve, I made the opening just about the same size since I knew I was going to use the other pocket for keys or my credit card.

Then just sew the sleeve from the front to the back or back to the front, making sure you still leave enough room for your cell phone. Then tie off the open thread ends.

DSC_0210

DSC_0212

If you put smaller items in the short pockets, they tend to fall towards the bottom of the sleeve. This can be annoying for some but for me it gives me a sense of security knowing my items won’t fall out. I just need to go fishing for my keys at the end of the day.

DSC_0214

So there you have it. My quick and dirty solution to built in t-shirt pockets. I like to move the pockets towards the front of my body for easier access to my cell phone, but that’s simply more comfortable for me. I also will sometimes secure the t-shirt using a binder clip, that I’ll use to clip my t-shirt to my bra.

DSC_0218

 

DSC_0267 - Copy

DSC_0270

Advertisements

T-Shirt Quilt Process

 

09.28.2016

0800

Materials:

  • Old Comforter you want to use as the backing for the quilt
  • Enough t-shirts to cover the back of the comforter easily
  • Sewing machine

Tools:

  • Sewing machine

Not everyone in my family is big on donating items as quickly as I do. I don’t mind that, so I wanted to come up with a solution that would satisfy the use of the items but still make more room in the closet. In this case, the clothing item were the cotton t-shirt collections my family had accumulated. My older brother has a small collection of printed shirts from years of working for different companies or they were from different social events. I have kept a small collection for my mother over the years from elementary school t-shirts, to college t-shirts. I kept these because they marked a point in my life history that was significant. It bothered me that my t-shirts were stuffed into a bag in my old closet, so I wanted to make good use of them.

For both collections, I decided to make a t-shirt quilt for each family member. My brother’s shirts filled up one quilt and by combining my t-shirts as well as some of my mom’s, I would be able to create a single quilt for her. I found my brother’s old comforter which had The Transformers print on it and used that as the backing for his. I used my old comforter which had The Wuzzles print on it, for my mom’s quilt.

A few examples of t-shirt quilts that I’ve come across, suggest to cut out perfect squares in which the logo or image is centered in the middle of the square. I didn’t want to use this method because I didn’t want to waste any t-shirt material. I didn’t see the point in having perfect squares when the images varied so much on where they were located on each shirt. Also, I knew I could overlap the rows and create a slightly thicker quilt by leaving the extra material in place.

I decided to make this process in bullet form since a formal post would be too long to read, so here it goes:

  1. Cut off all of the sleeves and collars from each shirt. Put aside the shirt sleeves which have logos printed on them because you will include them in the quilt later on as gap fillers. Keep your scraps when you make this project because you never know when you may need the extra material to fill in gaps.
  2. Lay out the rows to see how you want the over all tile pattern to sit on the quilt and move them around if necessary. (I wanted each color shirt to create a checkered pattern with their base color)
  3. Gather the sets of t-shirt rows and placed them on the blanket in the order from the top of the quilt, to bottom of the quilt. (You can take a picture before you move the tiles from the final layout on the blanket too) dsc_4946
  4. Start pinning the t-shirts together with the shirts all facing upright and face to face. During this time, you may notice that come of the “t-shirt trimming” might be crooked, but that’s fine because that’s why you have the filler pieces. dsc_4950
  5. Sew the tiles together in each row of shirts so that the rows become one piece. dsc_4951
  6. Lay each row on the blanket as you want them to look and start pinning the rows to the blanket. Use as many sewing pins as necessary and be careful, because you may get pricked by those. Keep in mind that these pins may come apart once you move the blanket to the sewing machine, so you may want to pin the fabric together and give extra room on the pin for movement error. dsc_4982
  7. For the areas that I saw were lacking in t-shirt fabric, I added in the t-shirt fillers. This usually happed around the edge of the blanket. dsc_5002dsc_5001
  8. In order for me to fit the comforter into the sewing machine, I rolled it up on one side and sewed it through like this: (you my want to unravel it due to the weight of the blanket and that it may pull against the sewing machine as you feed it through) dsc_4982dsc_4987dsc_4993
  9. Keep sewing, patient and you’ll finish. I sewed these tiles across the blanket. I have seen some people sew in a grid pattern along the tile edges. Since my tiles don’t line up exactly to the row above, I decided to only sew my tiles across the blanket. dsc_4995

dsc_4998

This is a process and it takes time. There were a number of times when my sewing machine stitching backed up and I ended with a clump of thread on the backside of my quilt or when my needle broke twice. Just keep going and you’ll end  up with the final product in no time. It’s an interesting project and you can put a spin on it however you like. This is a completely customized project which makes the intent that much more meaningful. I really am happy about how the blankets turned out and I know that my family is too.

Upcycling Sleeves Into Reusable Gift Bags

09.19.2016

0800

Materials:

  • Leftover t-shirt sleeves from the shirts you planned to make into a t-shirt quilt
  • Sewing kit

Tools:

  • Sewing machine

So I started making a T-shirt quilt for my brother and one for my mother. For my brother, I used his old t-shirts and for my mother, I took a few of my childhood t-shirts as well as some of hers, and combined them into her quilt.

After trimming the shirts for the quilts, I had leftover fabric which I sewed into gift bags, however, I ran out of shoelace to use as the drawstrings. These gift bags are for giving away to those who may want them, and I don’t suggest to use these bags for bulk grocery shopping due to the elasticity of the way t-shirts are sewn together. I usually use bedsheets to make the reusable bulk shopping bags because their thread count is higher and it’s a denser assembly. The left over fabric included the t-shirt collars, the sleeves of the shirts and extra fabric from certain shirts which only had print on one side.

dsc_4956

Bags:

I hadn’t figured out what to do with the collar portions, so I set them aside. However, with the pile of sleeves, I thought I would make odd shaped reusable gift bags out of them. I knew that even if I sewed the pairs of sleeves together, the gift bags would be lopsided. Then again, with the odd shape to the gift bags, maybe it would be easier to hide the shape of the gift inside. So I basically paired up the sleeves and sewed the wide ends together, and closed off one of the open ends.

dsc_4967

Once I finished sewing the gift bags made from the sleeves, I ended up with pentagon shaped gift bags. These bags were not expected but they didn’t turn out too bad, I actually like the odd shape that they ended up becoming. I’ve never used this type of fabric for this kind of use, so this was all a new journey for me. However, if you don’t have shoelaces available or have extra t-shirts lying around, you can make your own drawstrings to use.

dsc_4968

dsc_4955

Drawstring for the bags:

Since I ran out of the shoelace that I usually use, I had to figure out a way to still create a drawstring for these bags. So I took a sleeve piece and started creating a cut line that spiraled around the sleeve. I started at the seam edge of the sleeve (which usually is located on the bottom of the sleeve), and started cutting upwards. I started here because as I spiraled around the sleeve, I knew I would cut through the thread that held the shirt sleeve together and by starting at the seam, it would look like a cleaner cut.  I wanted the width of each string to be about 1/2″ so I just continued to cut around around the sleeve, keeping in mind the width of the fabric until I ran out of sleeve to cut . With t-shirt fabric, when the fabric is cut, it tends to curl in on itself so that was the goal behind choosing the 1/2″ width. The fabric piece would curl in just enough to fit through the sleeve cuff to create a drawstring.

dsc_4960

dsc_4961

(sorry for the blurry picture, but you get the idea)

Final Product:

So with the different parts of the t-shirts and long sleeve shirt I had used to create the t-shirt quilts. I ended up with a few long and tall gift bags, a bunch of square/rectangular bags and a handful of pentagon shaped gift bags. I actually really like the pentagon shaped bags, I didn’t know they’d turn out like that. It was a nice surprise after all the work was done. I hope this post might inspire or help those who might embark on the same journey.

dsc_4963

dsc_4968

If you want to check out some other options for eco-friendly gift wrapping, check out these gift wrapping ideas from these other bloggers: