DIY Reusable Face Masks

April 27, 2020March 16, 2021 / Yen-Van Tran / 1 Comment

04.27.20

0600

Materials:

Paper- Graph paper might be easier to follow the grid system
Pencil- If you plan on sketching out the templates
Fabric Crayon- If you plan to sketch the templates on dark fabric
Ink pen- For tracing the templates onto the fabric pieces
Ruler (Centimetres)
Fabric
Elastic bands/ribbon/surge fabric together to create straps to tie around head

Tools:

Sewing Machine
Sewing Kit

So I’ve been seeing a lot of YouTube videos, blog posts and Instagram posts of DIY reusable face masks recently. I wanted to try to figure out how to design a face mask that anyone could make and use.

However, I didn’t want my readers to have to print out a template if you were not able to. I wanted to teach my readers how to be able to build your own template. Not everyone has access to a printer, printer paper or even printer ink right now, so that was my overall goal for this blog post.

So I decided to design my own templates, but I wanted to give you guys the measurements as well as the templates. The following 6 images are of the designs I created (they are in JPEG format). You can download them or use the measurements and create them yourselves. These were all drawn on 8.5″ x 11″ sheets, or 21.59cm x 27.94cm sheets. The light, dashed lines, around the bold black boarder on each image, is the edge of the paper. I decided to create these drawings in centimetres since the metric system is more universal. The fabric filter insert templates are not a guarantee of protection from any virus, but it will give you an extra layer of fabric, along with the mask.

I had drawn out the first templates, so what you’re looking at (below) was my own first round of the templates. I cleaned up the design for the downloadable images for you guys.

First decide which fabric will be the exterior layer of your mask, then decide which fabric will be your interior layer of your mask. After that, you can choose a fabric to be your filter layer. I tend to chose a lighter color for my filter layer, so it stands out from the rest of the mask. For my fabric filter inserts, I used whatever leftover fabric I had.

I decided to show you how I created the child sized reusable face masks and reusable filter inserts in this blog post. The same steps are used to make the adult fabric masks and adult filter inserts.

REUSABLE FABRIC FACE MASKS:

First I cut out fabric pieces for each of my masks. There are two fabric pieces for each of those six cutouts in the next photo. I chose my exterior layer fabric and interior layer fabric and I then traced the child mask template onto each set of fabric piles. I didn’t trace the templates onto each fabric piece, since I like to cut my fabric, two at a time.

I cut up the fabric I chose for my filter layer for each mask, and then I traced the child filter templates onto the fabric pieces.

Once I traced all of my templates onto the correct fabric piles, I pinned the fabric piles together and cut out each set accordingly.

For each pile of the filter layers, I placed each set with the ugly side facing up, so I could hem the edges. I simply folded over the edges, pinned them in place and then sewed them together. I used a back stitch so I could secure the ends of the sew lines. I used a zigzag stitch throughout this whole project.

So each set of fabrics for each mask will include, two exterior pieces, two interior pieces, two filter layer pieces. I had already cut out my ear straps, which were 12cm each. But I wil elaborate on the ear straps later on.

Now you have to sew each set of fabric layers together. For each set of fabrics (ugly side facing outwards), sew along the arch edge, from one end to the other.

Now we have to line up each fabric pieces to get ready to be assembled. First, interior layer (ugly side down), then on top of that is the filter layer (ugly side down), and lastly, the exterior layer (ugly side up). Pin together the stack so they wont move during the sewing process, and sew along the top and bottom of the mask. Trim the excess thread on the ends of each sew line.

Flip the face mask inside out, between the filter layer and the exterior layer.

Once you flip the mask inside out, you should be looking at the pretty side of the exterior fabric on one side of the mask, and then the pretty side of the filter layer fabric on the other side of the mask.

I folded in the sides of the mask so I could pin the fabric together. You can also iron the folded sides too, so there is a clean and crisp edge. I just needed the edges to build their shape until I added on the ear straps.

I actually cut out straps, about 12cm in length. In order to test the fitting of the straps, I actually pined the straps in between the exterior layer and the interior layer, on the side. The pins are pushing from the interior layer, outwards. If you want to use this method to test the fitting of the ear straps, please be very careful when trying on the mask.

If you don’t have elastic bands, you can quickly sew long pieces of fabric together and use the long pieces as ties, to tie around the user’s head. I used four pieces of fabric that were 72cm in length and made my straps 4cm wide, for one mask. Technically, you probably only need each strap to be 25cm in length, as long as it can be tied around a large adult head with enough extra slack for an extra knot. Each strap will be sewn to each corner of the mask.

I cut out each strap, folded them into thirds and then used only two pins to secure one beginning end of the strap together. I didn’t pin down the whole strap, because with a fabric this small, it’s quicker to sew and fold simultaneously, as the fabric is passing underneath the presser foot of the machine. The machine will feed the fabric under the pressure foot, so just hold the folded fabric steady and taut.

I also created a back stitch at the beginning and end of the strap to secure the sew line.

Once you decide if you want to use elastic bands or sew your custom straps together, you can tuck the ends of the straps between the exterior layer and interior layer, and sew the edge of the mask together.

Using my ink pen, I drew tiny triangles on the top straps of each mask to indicate the top verses the bottom of the masks.

EDITERS NOTE:

I decided to change the style of straps for my masks, since I was not 100% satisfied with the design. I decided to shorten the seam on the top and the bottom of the mask so there would be a small 1/4″ gap at the top and a small 1/4″ gap at the bottom of the mask. I did use the backstitch control on my sewing machine so the thread would be held in place. As you can see, I used the backstitch at the beginning and the end of the sewing line.

I then attached an elastic band to a small safety pin and inserted the safety pin into one of the small gaps, so I could run it through the mask, and out the other end. It doesn’t matter which direction you run the safety pin, but I tend to start with the small of the two gaps, so it’s easier to locate the pin when I need to pull it out the other end.

I then tied off the elastic band with a single knot. I like this style more than the last style, because this technique allows the elastic band to be replaced easily and adjusted easily.

REUSABLE FABRIC FILTER INSERTS:

Using my templates, I cut out fabric pieces for both my adult template as well as my child template. For each template, there are two fabric pieces per set. I then pinned them together, so they wouldn’t move when I had to sew them together.

With the ugly side of the fabric facing outwards, I cut out filter insert pieces and then sewed them together. I sewed in one direction, around the edge of the mask, but left one side open. This opened side will be the location of where the filter insert needs to be flipped from the inside to the outside. I used the back stitch lever to secure the sew line, as always. I then trimmed the extra thread.

I flipped the filter insert, inside to outside and using a chopstick (you can use a slim stick), I made sure all of the corners and edges were fully stretched out from the inside.

I then ironed all of the fabric inserts I had sewn and then tucked in the open end to pin the fabric closed. I then hand sewed that edge of the filter, using a running stitch.

So there you have it. My templates are available for anyone to download and you can make as many as you like. Please keep in mind that these masks are not a guarantee against any type of virus, but they will help protect you from other people’s exposure to you. There are a lot of fabric mask tutorials on social media right now, and I hope you can find one that you prefer to use and make. I hope this blog post helps anyone it can reach.

PLEASE STAY SAFE AND HEALTHY EVERYONE AND I HOPE TO SEE YOU GUYS SOON!

☁️

Sofa Armrest Organizer

October 14, 2019October 14, 2019 / Yen-Van Tran / Leave a comment

10.14.19

0600

Materials:

Two Curtains at 5′-10″ in length

Tools:

Sewing Machine
Sewing Kit

I have an extra set of curtains, which I didn’t want to use anymore. I decided to create a sofa armrest organizer with both curtain pieces. Both curtain pieces were 5 foot 10 in length, and 27 inches wide.

I wanted my sofa armrest organizer to sit at a certain height off the ground, but I also wanted the top half to also tuck underneath the couch cushion. I first measured how high off the ground I wanted my couch armrest organizer. Since I needed to hang it over the sofa armrest and then wrap back over the arm to tuck underneath the cushion, that left about 47 inches to tuck underneath the cushion.

I wanted to store books in the first organizer, which would be fairly heavy, so I needed a lot of the material to tuck under the seat cushion to hold it in place. I actually wanted the top part of the organizer to tuck underneath an entire sofa cushion width, due to the weight that would be applied.

FIRST SOFA ARMREST ORGANIZER:

When I measured out my first design, I wanted the pockets for my books to be 14 inches in height. I first hemmed all of the edges and then I folded one edge to create the 14″ tall pockets. I sewed around the edge of the folded piece (yellow arrows) and then divided the pocket in half, and sewed a dividing line down the center to create two tall pockets (red arrow). These pockets will be able to hold my books and paperwork that I’m currently working on. I wanted my pockets to be a bit taller than the standard paper size (8.5″ x 11″), due to the fact that I knew the width of the pocket might eat up some of the height. I also wanted to be able to hide my books and paperwork, so my pockets wouldn’t look like they were overflowing with paper.

To attach the sofa armrest organizer, I removed the couch cushion on the side of the couch, located how high I wanted to hang the organizer, and then replaced the couch cushion. Since the top half of the fabric organizer is tucked under the couch cushion, it stayed in place.

SECOND SOFA ARMREST ORGANIZER:

I also wanted to create a second design, which would have smaller pockets for smaller items. My second design would have 10 inches in height for the books, and 6 inches for smaller objects.

Using the same sewing method as the first design, I hemmed all of the edges of the fabric material, and then measured 16″ of material at one end. I folded up the 16″ material, sewed along the outside edges of the tall pocket (yellow arrows), which created a giant 16″ tall pocket.

I then took the bottom 6″ of the pocket and folded it up, to create a shorter 6″ pocket at the bottom. This 6″ tall pocket also helped create the 10″ pocket behind the smaller pockets. I then sewed on both of the side edges of the fabric piece (red arrows) and then sewed a dividing line (blue arrow) to create a total of four pockets for this design. I sewed the edges of this design, all the way to the top of the pocket to reinforce the side edges.

Using the same method as the first sofa armrest organizer, I located where I wanted the organizer to hang on my armrest and I tucked the top half of it under the couch cushion on the end.

Since these sofa armchair organizers are made of fabric material, I can toss them into the washing machine and wash them easily. I can also fold them up and put them away if I don’t need to use them. Fabric is my favorite material to work with since it can be taken apart and reused multiple times. I love that it is a very flexible medium and I was able to put my old curtains to good use.

TerraCycle Programs

September 16, 2019September 16, 2019 / Yen-Van Tran / Leave a comment

09.16.2019

0600

TerraCycle offers a range of free programs that are funded by conscientious companies, as well as recycling solutions available for purchase for almost every form of waste.

TerraCycle offers free recycling programs funded by brands, manufacturers, and retailers around the world to help you collect and recycle your hard-to-recycle waste. Simply choose the programs you’d like to join; start collecting in your home, school, or office; download free shipping labels; and send us your waste to be recycled. You can even earn rewards for your school or favorite non-profit!

TerraCycle reuses, upcycles, and recycles waste instead of incinerating or land filling it. This moves waste from a linear system to a circular one, allowing it to keep cycling in our economy.

You can collect points, by collecting trash for your specific program and then redeeming your points. You can redeem your points by either receiving a cash value, or you can donate the points to charity. There’s a list of charities that team up with TerraCycle, in which you can choose to donate your points to.

I always donate my points, since I think this program is a great way for charities and companies to get involved with creating less waste, and I really don’t value the cash redemption as much.

Some of the charity organizations I was looking at to donate my points were:

100 points = Help safeguard 1 acre of rain forest for 1 year in the Northwest Gaia Amazon.
1 point = Help http://www.Carbonfund.org to reduce a 2 pounds of emissions from the atmosphere.
1,000 points = Help http://www.Carbonfund.org to reduce a metric tonne or 2,205 pounds of emissions from the atmosphere.
300 points = Have a tree planted in an American forest through Arbor Day Foundation
300 points = You can provide one year’s supply of clean drinking water to a person who otherwise would lack access to this most essential element.
625 points = You can help the D’Addario Music Foundation give one child a free music lesson.
2500 points = You can help the D’addario Music Foundation provide a child with 4 music lessons for a week. Kids who study music are 5x more likely to stay in school, graduate on time and apply to college.
100 points = For every 100 points, TerraCycle will send $1 to the American Red Cross to provide aid to those affected by natural disasters.

For this round, I decided to split my points between a couple of different charities. I decided to redeem my points with:

Providing one year’s supply of clean drinking water to a person who otherwise would lack access to this most essential element
Help http://www.Carbonfund.org to reduce emissions from the atmosphere

If you want to participate in the TerraCycle programs, check them out at https://www.terracycle.com/en-US/select-country to see which programs you can join. The participating companies change often, so check back with the website to see updates. There are a lot of programs to choose from and supporting the partnership between TerraCycle and the participating companies creates more awareness to how much trash we produce, and how companies take responsibility for the trash they pass onto us consumers.

Mending Items Versus Buying Items

July 29, 2019August 5, 2019 / Yen-Van Tran / Leave a comment

07.29.2019

0600

If you read about my Fast Fashion post, it relates to this one. If not, please go check it out. Even though I do by thrift store items, I will still mend an item to save it from a donation. Sometimes I will mend my items and then I donate the item. For instance, I found an old shirt at my aunts house. It had a few holes in it but overall, I liked the color and I didn’t mind the cut of the shirt. The color went perfectly with my color palette for my capsule wardrobe, so I really wanted to save it from being donated. I just needed to mend the shirt, so it would be decent to wear.

Now I have an almost new shirt.

Whenever I upcycle clothing, I always keep scraps of the leftover clothing item. In my Reusing Fabric and Thread blog post, I wrote about keeping my fabric scraps in a small bag. I literally have a bag of scraps. I love fabric, and the use of fabric in different products, (depending on the thread count, material, and the way fabric is sewn together,) can be a very durable material.

Some shirts have higher thread counts, which lends them to become excellent candidates to upcycle into grocery bags, or other heavy duty bags. The smaller scraps that I keep, I always try to find a use for them. Whether it’s going to be upcycled into a small project or large project, the one thing I can count on is that I can throw it in the washing machine to clean it.

If I had a choice to make, with picking and choosing reusable products, I prefer to choose items that I can wash easily. I don’t like to buy items which require a special cleaning method or liquid to clean. I like to sew and mend items, because the product that I’m usually mending, only needs to be washed with soap and water.

If you reflect on the products that you use daily, the majority of them are probably sewn together: your clothes, handbags, wallets, car seats, bedding, upholstery, etc. Knowing how to sew and understanding how to repair fabric products has been a life saver for me. I actually learned how to sew by hand, and didn’t learn how to use a machine until years later.

Learning how to mend items can save you money, time and stress. Even the simple act of sewing on a button is helpful. You can save a simple dress shirt, like I did, from sending it to a donation station.

Reusable Facial Cotton Pads

November 19, 2018June 24, 2019 / Yen-Van Tran / Leave a comment

11.19.2018

0600

Materials:

3-4 Cotton Handkerchiefs, pattern or color of your choice (Note: if you tend to use makeup/liquids that are oil or wax based, the substance will leave a slight film on the fabric, over time)

Tools:

Sewing machine
Sewing Kit
Iron
Ironing Mat/Board

When I started eliminating single use products out of my life, I really had no need to replace all of the products with reusable ones. But as we all know, life changes, and we adapt to it. Years ago, I had used single use, cotton rounds to remove makeup and nail polish. When I transitioned to a minimalist zero waste lifestyle, I eliminated nail polish from my life and only used vegan makeup. My vegan makeup removal process does not require cotton pads to remove the makeup, just soap and water.

Recently, I was gifted a facial skin care kit and I had no cotton pads to use with it. So now, in order to use the gift, I needed to prepare beforehand, and sew a pack of reusable facial cotton pads.

So for this project, I took a shortcut in which, I used a few handkerchiefs I already had. I knew I only needed rectangular cotton pads about 2″ x 1″, just wide enough to hold across my three fingers when using them.

I know that the makeup industry standard is to use “cotton rounds”, but when I broke down the division of my handkerchiefs, it was easier to make cotton ‘rectangles’ instead. I took each handkerchief and divided it in half, then divided those pieces in half, and then divided those pieces in half, until I broke down my handkerchief into small squares, about 2″x 2″. These squares will be folded in half and sewed into rectangles. This way, the cotton pads with have two fabric layers.

Technically, the final size of the cotton pads is up to you, because if you end up with a larger square, that only means you get to use a larger rectangle surface to use on a day to day basis.

So I took one of my handkerchiefs and folded it in half and cut it. I then folded the rectangles in half, which resulted in large squares. I folded the large squares in half and then folded those rectangles in half to create the small squares.

Using my iron and ironing mat, I folded each small square in half, to create the crease for the cotton pads. This crease is where the rectangle shape starts to form, and to save time, I would iron the pieces four at a time.

In order for me to iron four cotton pads at the same time, I placed four cotton rectangles in a square formation, in which the edges were placed inward and then I would iron the creases across the mat.

I used my sewing machine to sew the open edges together and I chose to use the zigzag stitch and a universal needle for this project.

The most common use of a zigzag stitch is to enclose raw edges as a seam finish. As a seam finish, one edge of the stitch is sewn off the edge of the fabric so that the threads of the fabric are enclosed within the threads of the zigzag stitch and the fabric is unable to fray because of the zigzag stitch.

Be sure to sew in from the edge slightly. Then, trim away the excess beyond the zigzag, making sure not to clip into any of the stitching. You can also use two rows of zigzag for extra “fray-stopping” power.

I started my sew line from one open end of the fabric, and continued around the open edges.

I like to tie off my thread ends, but you can reverse the stitch so that it your sewing machine creates a back stitch. In other words, while you’re sewing the last leg of the fabric edge, slow down the speed of the stitch by backing off of the pedal. Slow to a speed in which you can spot each needle point going into your fabric. If you can learn to anticipate where the needle will land, then you’ll be able to get as close to the end of your sew path and create a tighter back stitch for your projects. So, as you get closer to the end of your sew path, press the Back Stitch Lever, and hold it down, so that the direction will reverse. When you’re satisfied with the length of the back stitch, let go, and the machine should continue to push your fabric back to the original direction. (Try to get as close as possible to the end of the sew path before reversing the stitch.)

Personally, I would only reverse the direction for about half an inch. Don’t go back too far, since this is such a small piece of fabric. This back stitch will lock in your stitch. Then simply trim the thread, and you’re done.

I brought home an empty coffee creamer container from work, since I liked the shape. I knew that this project was coming up, so I thought it would be a good container for my reusable facial cotton pads.

So there it is, this is how I created my reusable facial cotton pads. I hope that this post may inspire you to eliminate single use personal care accessories in your bathroom.

Upcycling A Shoe Organizer

October 2, 2018October 2, 2018 / Yen-Van Tran / Leave a comment

10.02.2018

0600

Materials:

One over the door shoe organizer
X-acto blade
Cutting mat (or cardboard, plywood, some type of surface you’re willing to cut into and can damage just a little bit)
4 Safety Pins

Tools:

Sewing machine
Sewing Kit

So I’ve owned an over the door shoe organizer for awhile. I didn’t use it a lot because I didn’t have many pairs of shoes. When I started to declutter my life and minimize my possessions, I kept it because I still liked the design and I knew I could use the material to create something else.

Because I’m not a fan of keeping items out in the open, much less hanging them out in the open, I knew I wanted to upcycle this shoe organizer into smaller organizers. I personally like things to be put away. My minimalist, zero waste lifestyle lends my living space towards clean surfaces and minimal decor. So I wanted to create two smaller organizers which could be hung up in the closets.

The goal was to create two separate organizers that were each 2 pockets across by 3 pockets vertically on each side of the smaller organizer. So each side of the hanger would hold a grid of pockets that was 2 pockets across by 3 pockets vertical.

First I cut the shoe organizer in half.

I then folded each organizer in half (vertically) to find out where I wanted to locate the hangers.

I then placed each hanger on each organizer, as I wanted them to sit. I wanted to place each hanger so that the top bars of the hangers would still be protected by the fabric. I only wanted the neck of the hanger to stick up and out of the fabric so the fabric organizer would sit higher on the hanger. The hanger would have more control of the overall weight of the items inside each pocket when it was hung up.

I placed the hangers where I wanted each hanger to be located on each organizer and then marked the location of the bottom bar. I needed to make a mark at those locations, because that’s where the bottom of the openings for the hangers would pass through.

Using the X-acto blade, on the folded edge, I carefully cut a straight line of where the hanger would stick out. I cut along the mid line of the fabric grid pattern and only cut enough for the hanger to fit. You can sew the edges of these openings if you want a clean and sturdy structure around the edge of the opening. I suggest using a running stitch to do that, if you choose to.

Using the bottom of opening as a location marker, I sewed both sides of each organizer together. I wanted the backs folded and sewed to one another to create a more sturdy central structure. I sewed from the bottom of each opening, around and up to the other side, making sure I stopped at the other marker.

The idea was that I wanted to seal the two flaps of pockets to each other, but leave enough room for the hanger to slide in and out of the design.

Once the hanger is slid into place, the flap should allow the user to remove the hanger if necessary. I used a hem stitch to secure the top of the opening on the folded edge (see below). I did this because I know that the weight of the the organizer will tear the opening over time. I wanted to secure the top of the opening and reinforce the structure.

I stitched an extra line above the hanger (towards the folded side of each hanger), but underneath the pocket flaps, to reinforce extra support for the organizer.

Using a safety pin, I pinned the opened edge approximately where the top of the hanger was located on the opposite side. This way, the hanger can be removed easily when it comes time to wash it or put it away. The safety pin will act as a closing mechanism to hold the hanger in place.

So there you have it, this is how I upcycled my over the door shoe organizer. Although, I technically only created smaller shoe organizers, I had the idea that I could use these smaller organizer to store smaller items such as jewelry, scarfs, socks, etc., that can get lost in a closet. Basically, anything you might store in the top drawer of your dresser, you might use this for. I don’t use a dresser, so this product can be useful for me. Right now I actually use a few of the pockets to keep some running and workout items organized. I like this design for the fact that it’s double sided and it can be folded up and put away if it’s not being used. Hopefully this post might spark some organizational ideas for your life.

Until next time!

Quick T-Shirt Pocket

September 11, 2018September 26, 2018 / Yen-Van Tran / Leave a comment

09.07.2018

0600

Materials:

One T-shirt (or two, but definitely at least one)

Tools:

Sewing machine
Sewing Kit

Living a Zero Waste life means that I create simple solutions for simple problems since I don’t want to go buy anything new or seek out another possession to take care of.

So I usually carry my phone around with me when I’m doing certain types of household tasks. These tasks don’t require a lot of vigorous movement, but I’m definitely moving around. A lot of the time it’s annoying to remember to carry the phone from one place to another when I’m running around the house and if my hands are dirty, I really don’t want to touch my phone. I needed a quick solution where I could carry the phone along with my keys without much hassle. I didn’t want to go out and buy a separate cell phone holder strap that would wrap around my arm. I have one for workouts, and that strap holds down my cell phone securely since I’m running. But I just needed a quick solution where I could carry around my phone and my keys easily for a few hours.

My quick solution was to see my t-shirt sleeve in half and create a pocket. my t-shirt sleeves are usually longer than I need them to be. This gave me the extra material to work with. I simply folded my sleeve in half and pinned the sleeve all the way around.

Depending on the width of your cell phone, measure that distance out on the top of the sleeve. Just make sure you divide the width of your phone in half and center the opening on the top of the sleeve.

For the other sleeve, I made the opening just about the same size since I knew I was going to use the other pocket for keys or my credit card.

Then just sew the sleeve from the front to the back or back to the front, making sure you still leave enough room for your cell phone. Then tie off the open thread ends.

If you put smaller items in the short pockets, they tend to fall towards the bottom of the sleeve. This can be annoying for some but for me it gives me a sense of security knowing my items won’t fall out. I just need to go fishing for my keys at the end of the day.

So there you have it. My quick and dirty solution to built in t-shirt pockets. I like to move the pockets towards the front of my body for easier access to my cell phone, but that’s simply more comfortable for me. I also will sometimes secure the t-shirt using a binder clip, that I’ll use to clip my t-shirt to my bra.

Zero Waste Week 2018

August 31, 2018September 1, 2019 / Yen-Van Tran / Leave a comment

08.12.2018

0600

Zero Waste Week is almost here! This year we have more participants and the event is hoping to reach a larger audience. Rachelle Strauss is the creator and director behind Zero Waste Week, an annual awareness campaign since 2008. It takes place in the first full week in September each year, and promotes awareness in producing rash and the disposal of trash. Zero Waste Week encourages the public to be more aware of how much trash they produce as well has encouraging people and businesses to live and work more sustainable and reduce their carbon footprint. She has been featured in The Guardian, National Geographic and The Sun for her efforts in promoting awareness for a more sustainable future.

This is my second year participating in Zero Waste Week as an ambassador. I’m so grateful and proud to be a part of this movement. There are many others who are and have been a part of this movement long before I came along, you can meet them at Zero Waste Week Ambassadors. You can also read all about this week and get involved at Zero Waste Week- About. Use the hashtag #ZeroWasteWeek to show us your progress!

Each day has a theme of Zero Waste which focuses on different aspects of creating less waste. For Zero Waste Week 2018, I listed the topic for each day and I linked some of my blog posts that pertain to each topic

September 3, 2018, DAY 1

We will be discussing the difference between ‘necessary’ and unnecessary plastics. The amount of plastic polluting the ocean is astounding. By 2050,plastic in the oceans will outweigh fish, predicts a report from the Ellen MacArthur Foundation, in partnership with the World Economic Forum. Herare a few past blog posts which explain how and why I became very conscientious about my purchases.

September 4, 2018, DAY 2

Auditing our daily personal care routine! Plastic containers in the bathroom are nothing new. However, because we use bathroom items so frequently, the amount of plastic containers we go through can be unnerving when you look at the statistics. As the zero waste movement has caught on, more stores are offering bulk bathroom items and refill stations. If you want to read about some of my zero waste bathroom blog posts, check them out below.

September 5, 2018, DAY 3

Plastics in the kitchen and food packaging seem to be a huge problem for those starting out on their zero waste journey. To make your kitchen zero waste, can be quite challenging. Creating a zero waste kitchen took time and trial and error in my own experience. To read more about the challenges I faced, check out the blog posts below.

September 6, 2018, DAY 4

Household cleaning seems to be a sensitive subject for many. There are a variety of sanitary concerns and medical concerns. As for me, I use a vinegar and water mix, baking soda and a bristle brush to clean. You can read more about my method in the link below.

Zero Waste Cleaning

September 7, 2018, DAY 5

Zero Waste is for life, not just a week! Plastic pollution, trash pollution, water and soil pollution is an ongoing battle. A zero waste lifestyle does require an awareness of oneself and decisions. There are parameters that some of us deal with, and that others don’t, such as medical conditions, personal health and financial constraints. As long as the effort and awareness of product consumption is considered on a day to day basis, reducing trash is inevitable. If you want to read about my moments and lessons throughout my zero waste journey, you can check out the links to my previous blog posts below.

I hope you will want to take the pledge and reduce the amount of trash you consume, and if you want to read about my journey and how I got started, you can read that here in, How I Got Started. At the end of the week’s festivities, it’s time to take all you’ve learned during the week and start/continue your own plastic free journey. There are a lot of Pinterest boards, Facebook Groups and forums that offer tips to start a zero waste lifestyle or tips for different experiences with the zero waste lifestyle. You can check out my own social media boards and follow me, or you can follow the Zero waste Week community on Facebook, Twitter, Pinterest, and Instagram.

What’s In My Purse?

June 12, 2018June 24, 2019 / Yen-Van Tran / 1 Comment

06.12.2018

0600

Since I’ve written about What’s in My Makeup Bag? and What’s in My Sport Emergency Kit?, I thought I’d show you what I carry around in my purse too. These are the items I use daily and essentially, and these include my zero waste essentials.

So an overall view will reveal that I usually carry my water bottle, my eyeglasses case, purse, keys, sunglasses, my reusable utensils, my cloth napkin and my cloth handkerchief.

Sometimes I will switch out my water bottle with my tumbler, if I’m going to grab coffee. Most of the time I’ll usually carry my water bottle instead of my tumbler because water is more critical for me on a day to day basis.

In my purse, (which is a pencil bag, because pencil bags tend to have more pockets and are washable) I’ll carry my cards and cash, a small bottle of lotion, a comb, my business cards case, a barrette, extra hair ties, my lip balm, lipstick, eyeliner, my mini 3 in 1 stainless steel screwdriver key chain eyeglass repair tool, extra bobby pins (because you can never have enough), and a nail filer.

The only perishable and wasteful items I carry on a daily basis is my lip balm and my lipstick. I refill my bottle of lotion from my bulk lotion bottles. Anyone who uses hair ties knows that they tend to break and I haven’t yet found a good alternative to tie up my hair. I might lean towards going back to the scrunchie though. With the extra protective fabric around the hair tie, the life of the hair tie can last longer.

So there you have it. My purse is simple, and I don’t carry extra stuff around to the point where I can’t find anything in my bag. I tend to divide my items into smaller bags so that they’re grouped together in a more organized fashion. These are my day to day essential items, what do you carry around in your bag?

Upcycling Milk Crates to a Shoe Rack

February 6, 2018August 12, 2018 / Yen-Van Tran / 1 Comment

02.06.2018

0600

Materials:

2 Milk crates (about 12″ cubes)
Twelve 2″ Multi-Purpose Construction Screws
(Optional) Three 1″ wood screws – (for creating the holes)
2 Wood boards (12″ x 11-1/4″ x 1/2″)
16 small screws for holding seats in place
Pencil

Tools:

Power Screwdriver
Table saw / Mitre Saw (or saw it by hand with a rip hand saw)

So I needed a small bench shoe rack piece of furniture. All of the designs and products I flipped through on the internet weren’t quite what I had in mind. I needed a fairly short lengthed bench that didn’t need to store a lot of shoes. I also wanted a compact design. I only own six pairs of shoes and I don’t wear them all in the same season so the rest of the room would be for my family.

I knew I had a few milk crates, which I saw the potential use for this project. It was simple idea and I knew what I wanted the final product to look like.

The interior space within each milk crate was 12″ wide, 12″ high and 10-1/4″ deep. The height of the crate was enough room for two levels for shoe storage.

Since I was going to use two milk crates, I went ahead and found two random wood boards about 1/2″ thick. The boards I found were slightly wider than the depth of the crates, but I left the extra inch for larger shoes.

So using a miter saw, I cut each piece of wood board down to 12″ x 11-1/4″.

Next I divided the interior height in half and created a guideline down the middle. Since the crate is plastic, I used an exacto blade to lightly score the midline.

Using the wood screws and my power screwdriver, I pinpointed the locations of where I wanted my 2″ screws to be located. I like using the wood screws when locating holes in plastic because I can hold the shank of the screw and still guide the power screwdriver to create the straight hole.

After the holes are created, I took the 2″ Multi-Purpose Construction Screws and screwed them into the premade holes.

For the four screws that were located further towards the back of the box, I screwed the 2″ Multi-Purpose Construction Screws inwards. And for the two screws located towards the opening of the box, I screwed them outwards.

I wanted the back of the box to be supported more since it was further back. Also, I didn’t want anything sharp located towards the front opening.

I simply install each box with a board, placing the boards on top of the screws. The boards fit well and were snug enough where they didn’t move either.

Most shoes are longer than 10-1/4″, so leaving the extra 1″ helps with different sized shoes. If you need to store boots or shoes that wouldn’t fit the original designed space, you can simply remove one of the boards and the two screws closest to the opening. (I left the two screws here to show the original design)

So there you have it, you can create a simple seat and shoe storage very quickly and with simple materials. You can install a wood board on top to create a bench or stack these crates on top of a 2″ x 4″ frame to have one more level. There’s a variety of designs this can break out into. I might just do that when the spring season rolls around.

Hope this post jogged up ideas!

Update:

I wanted to secure a seat on top of the crates so I took another extra piece of wood board and lined it next to the piece I usually keep on top of the creates.

I took my pencil and traced the crate pattern on the underside of each board and then used small screws to outline at least two crate holes using the small screws. In order to know where I had to place my screws, I flipped my screws over so that they would be standing on their heads and then gauged where the sharp end of the screw would land. The head of the screws had to hug the insides of the traced corner, so I knew where to place it. Wherever the screw could touch both edges of the location, was where I knew I had to place the screw.

I measured the location for the screws in this manner because I wanted the screw to fit right inside of the hole I traced. The head of the screw as well as the thread of the screws had to fit comfortably into the existing holes, once it was flipped over.

I didn’t screw the screws in the entire length of the thread, so be very aware of the depth of the wood piece you pick out and the screw length that you choose as well. The idea here was to still have the screws sticking out of the board so it would fit nicely into the holes that were traced.

Once I placed the boards back onto the crates, the top was created into a quick seat to use while putting on shoes (or taking them off).

So there you have it! I like this much more now with the seat on top, and secured into place.

Upcycling Denim Jeans

January 30, 2018August 13, 2018 / Yen-Van Tran / 5 Comments

01.30.2018

0600

Materials:

One pair of denim jeans

Tools:

Sewing machine
Sewing Kit

So recently I started going auditing my traveling items such as my bath bag, travel accessories as well as my sport bags. I wanted to find 3 pieces of clothing to donate, but I also noticed that my bath bag wasn’t containing my bath items comfortably.

So I had the choice to go buy/find a new bath bag or find another solution. Out of the items I decided to donate, I found a tank top, sweater and a pair of jeans. Denim is one of my favorite materials to work with. I love upcycling denim into new items. The idea of donating the pair of jeans wasn’t exactly what I thought I would do, so I decided to make a stand up bath bag for myself, or at least a few stand up bags.

I’ve owned bath bags before, but the material was with a polyester or nylon blend. Over time, my bath bags would have soap or toothpaste residue stains. I figured that with a denim bath bag, I could simply throw it into the washing machine and it would clean easily.

I divided each leg in half by folding it in half. I then cut the legs off from the pair of jeans and then divided each piece in half.

I turned each of them inside out and designated the wider end of the pieces as the bottom of the bag and the smaller ends as the top of the bag. I folded the top of the bags down to create the drawstring tube. This is where I wanted to install the drawstring later.

DSC_8697 - Copy

I hemmed the bottoms of the bags by simply sewing a sew line across the bottom. I then sewed the drawstring tube. I measured 2″x2″ squares on the corners on bottom.

I marked these white dots on BOTH SIDES OF THE BAG, near the bottom section of the bag. These white dots will be used as guides of where you will sew in the next step.

DSC_8699 - Copy

I then flipped the bag upside down, and so that the right side seam was facing up. I then folded the bottom of the bag to create a diamond shape. You should be able to locate all four dots that were created in the last step, when molding the diamond shape.

DSC_8704 - Copy

The dots are guides to sew where you will sew horizontally across the diamond. After sewing the two lines, the diamond should look like this.

Since I was initially thinking of making a new bath bag, I wanted to sew a small pocket inside of that bag. I had this extra pocket left over from my Handmade Handkerchiefs project, so I added it on the inside. To find the opposing edges of the box, you can locate it by finding the perpendicular lines of the top and bottom hemmed lines.

DSC_8715 - Copy

If you want to make a small pocket inside, you can sew a piece of material to the inside of the bag, as long as you leave to top of the material open.

In this case, because the pocket was more than half of the height of the bag, I placed the pocket towards the bottom of the bag. I also knew that I would be folding the bag down when in use, so placing it towards the bottom gave me room for the top to be folded down.

Once I pulled the drawstrings through the bags, this is what they looked like. They stand up pretty well, and I can fold them down to create a top frame for the boxes.

This is what my bath bag looks like now.

I like the fact that I can simply fold my bag down and be able to access everything I need inside. I also have the habit of attaching a ring to the interior of any bag. So I attached a metal ring to the inside seam of the bag, because I wanted to hang small bath items for easy access.

So there you have it. This was my solution to my travel bath bag issue. I genuinely love denim and to make these stand up drawstring bags with this material is one of my favorite kinds of sewing projects that I like to get involved in.

I used my other bags for some camera gear and for another bag I use for traveling. The denim creates a nice thickness for the bottom of these bags, which is why I like to use them for electronics.

As a bonus…

I made a bag out of the top part of my denim jeans. I simply flipped the top inside out and hemmed the pant leg openings. Due to the nature of how the jeans were cut and sewed, I folded the outer edges of the jeans inward when I hemmed them.

I then sewed a zipper to the top opening of the jeans using sewing pins to hold the zipper in place and then sewing it to my pants. I used the same sewing steps to attach the zipper as to when I Created Slim Hanging Organizers.

Since my zipper wasn’t quite long enough for the length of the jeans, I closed off the jeans by sewing the top together.

I used an extra tie to create the handles of this bag. This was a simple choice but some people may prefer to use a belt or something more to their taste. I chose the tie because I wanted to be able to throw everything into the washing machine.

And as always, I attached a metal ring to my zipper for a slightly easier access.

I use this bag to hold some smaller items that need a bit of cushion like camera gear or smaller electronics.

Emergency Oil Candles

January 23, 2018August 12, 2018 / Yen-Van Tran / 4 Comments

01.23.2018

0600

Materials:

Olive Oil
One Shoelace (fairly long)
2 Glass jars with metal lids
2 Paper Clips

Tools:

Hammer
Punch tool or Long nail
Extra pieces of wood to work on

I first flipped the lid so that it was flipped upwards on top of the extra piece of wood. So basically I faced the inside of the lid upwards. I punctured a hole through the top using the punch tool. You can create a hole using a long nail too.

I then poured the olive oil into the jar so it was filled one quarter of the height of the jar.

I slid the shoelace through the lid, going in from the bottom and only leaving a bit exposed on the other side.

I placed the lid back on tha jar and let the shoelace soak up the olive oil.

These types of candles are used for EMERGENCY ONLY. If you use the cotton shoelace method, it’ll burn fast if it is burning well above the oil level. If the shoelace is very saturated with the oil, it should burn slow.

However…. I wasn’t satisfied with this design because I wanted the flame to burn right up against the surface of the oil.

So I took a paperclip and bent it open at the Mars Loop to open it up. I wanted to hold up the shoelace at The Hemicircular Returner, but I had to swing the Abbott Point over the Thunder Straight. (Yea I didn’t know that paper clips were comprised of ten different sections either. The internet is awesome.)

This design was more efficient and the flame was able to burn much slower. I prefer to burn the wick much closer to the level of the oil so that it won’t burn the wick as fast.

With this design, the flame is protected by the glass from any gust of air from the sides. However, it’s very important to keep the wick in the center of the container. I can still use the lid to cover the candle during storage, so it won’t go to waste.

*NOTE: Please be careful when handling this type of candle, keep it in a location with no flammable materials around it. If it spills onto a flammable material and that ALSO catches on fire, you’ll have a really big light source that you never intended in the first place.

I hope this blog post helps you in an emergency. This is a really easy hack for a candle and it should burn at least six hours or so. It won’t smell very pleasant, but it will definitely fulfill its function.

Creating Fabric Boxes

January 16, 2018August 12, 2018 / Yen-Van Tran / 8 Comments

01.16.2018

0600

Materials:

Hanging Fabric Shelf Organizer
Quilt Batting (optional)

Tools:

Sewing Machine or thread and needle
Sewing Kit
Ruler
Pencil
Iron and Ironing Mat

So I had a hanging fabric shelf organizer which I had replaced by sewing slim hanging organizers from pillow cases. You can find that blog post at Created Slim Hanging Organizers. But once I replaced the canvas hanging organizer, I didn’t know what to do with it. So I decided to create small fabric boxes with the leftover material. I first took it apart, literally took it apart piece by piece. I recycled the cardboard and I was left with rectangular pieces of canvas.

This project works best if you have perfect square material, but I didn’t want to waste any material so my pieces were left as rectangular pieces. Rectangular canvas pieces yield rectangular shaped boxes. Square fabric pieces will result in perfect square boxes.

So I first worked on the larger fabric piece. I first sewed the edges of the fabric so it wouldn’t com apart. I wanted these boxes to have a rougher look to them so I didn’t hem the edges. You can insert a fitted quilt batting piece in between your fabric pieces if you are using a softer fabric and if you want your box sides to be a stiff frame. I didn’t use batting because my material is canvas in this project.

I folded it in half (doesn’t matter which direction), and then I marked off a 3 inch by 3 inch triangle on each corner of the folded side. These triangle marks are the red lines in the photo. The larger the triangle, the higher the height of the fabric box will stand.

I opened it up and I folded the fabric piece in the perpendicular direction, with the first set of triangle marks still facing upwards.

I then proceeded to fold the fabric and mark off the second set of 3 inch by 3 inch triangle on each corner of the folded side. These are located with the blue lines in the photo.

From there, I sewed over the lines of where I had marked each set of triangles. I sewed the blue lines first. I then opened up the fabric piece, lined up the other corners in order to sew over the red lines.

Once you sew all of the four corners, when you open the fabric, it should look something like this. However, now you have to flip the box inside-out. Once you do that, the rectangular tabs you created should be on the inside.

With the four triangle flaps sticking straight up, fold them down to create a straight edge of the box. You can pin it down with sewing pins to watch the shape take form. Once you fold down all of the standing flaps, you should have a similar box like the photo below.

Now you just need to sew the standing flaps down to create sharper straight edges of the box and then sew the flaps on the inside of the box to keep them flat against the sides.

I’ve used the large fabric boxes to organize items in my linen closet as well as my camera gear items. Although these aren’t perfect squares, I like the idea that these fabric boxes are easily modified to most objects.

For the smaller piece of fabric, I hemmed the edges to keep the fabric together and then I measured a 2 inch margin all around the edges. Here, you can insert a piece of fitted quilt batting before sewing the edges together, to give your fabric box a more framed look.

I folded each edge over and ironed the lines to define the bottom of the box.

Using sewing pins, I folded in each corner and held them there. These smaller triangles will help define the corners of the box.

For each triangle corner, I found the center of the triangle and folded it in half. Once the triangle folded in half, the edges of the box came together naturally. I hand sewed these edges together by using a running stitch pattern. I sewed the running stitch in one direction, then simple went back the opposite direction to fill in the gaps in the pattern.

Once I sewed all four corners, I proceeded to sew the triangle flaps on the inside of the box to the walls.

I’ve used the smaller fabric boxes to keep smaller items organized that sit on shelves and table tops. So there you have it, these were very simple boxes made from the canvas material I had left over from the hanging fabric shelf organizer. You can use pretty much any fabric you want, but you may need to use quilt batting to strengthen the sides of the boxes.

Upcycled Coat Rack From Spoons

January 9, 2018August 12, 2018 / Yen-Van Tran / 1 Comment

01.09.2018

0600

Materials:

Wood board (18 inches long x 5 inches wide 1-1/2 inches deep)
Four 3 inch wood screws
Ten 1-1/2 inch wood screws
5 Spoons

Tools:

Power Drill
Power Screwdriver
Needle Nose Pliers
Slip Joint Pliers
Safety glasses
Gloves

So I wanted to make a coat hanger but I didn’t want to buy one. Apparently I had materials at home to make one of my own. This project is a fairly easy DIY for any of you who are curious.

My board was 18 inches wide and I wanted a minimum of 1 inch on each side, for margins. This left me with 16″ to work with. So initially I wanted to use 7 spoons for the hangers, but after I measured the distance, I decided to only use 5 spoons.

I divided the board up into three sections. The height of my board was 5-1/2″, but if you don’t want to use numbers, simply take a piece of paper and fold it into thirds. Then with a pencil, mark the first line and then the second. I wanted to offset my rows of spoons so the red line is for the top row of spoons and the green line is for the center of the bottom row of spoons.

Where the red line and margins intersect is where I drilled my top mounting holes. My bottom mounting holes is where the green line and the margins intersect. These holes are marked by the yellow circles in the image.

For the spoons, I wanted to drill 2 holes to mount each spoon and I knew I had to create hooks by manipulating the spoons. I picked out a drill bit that was a similar size diameter of my screws I was going to use on the spoons. Usually I choose a drill bit smaller than my screw, but that working with wood only. When working with metal, you want a drill bit that the same size as the screw since metal won’t give. Also, if you don’t choose a drill bit smaller than your screw, there’s a good chance you’ll strip the screw’s threads as you drill.

The green line marks the point of where I wanted my spoons to bend upwards, so they could be used as hooks.

When I drilled the holes, I wore gloves and my safety glasses because the metal slivers would fly off of the power drill. I applied slow but steady pressure while holding the spoon still and then I dumped the metal shavings into one side of my purple container. I did this to contain the shavings but also because it would be easier to discard them after I finished.

I first started bending the spoons by using the edge of my step ladder, then I used my Slip Joint Pliers to hold the spoon while using the Needle Nose Pliers to bend the spoons into hooks.

Once all of the spoons had holes drilled into them, I spaced the spons apart from each other in three inch increments. I proceed to attach the spoons to the board. For the wall mount attachment holes, I sunk the holes into the wood so that there was a slight design detail. I initial had made 2 drill holes so that I could mount it to the stud in the wall (those are the extra holes you see floating on the left half of the board), but I changed my mind and decided to directly attach it to the drywall instead. Because I was planning to use three inch screws, I knew that mounting it to the drywall wouldn’t be a problem.

But because I changed my mind on which drill holes I wanted to use to mount the coat rack, I now had two random holes that looked out of place. To fix this, I mirrored the holes to the other side of the board and then filled in the extra holes will extra wood filler we had left over.

I centered my coat rack and attached it to my wall. As you can see, the mistake holes look like design elements with the wood filler.

So there it is, my coat rack made from spoons. These spoons are a few extra spare spoons from my mother’s kitchen and I really like that I was able to upcycle these extra spoons, knowing that a part of her kitchen was now used in an item I really needed. It’s a nice homage to my mom in a subtle way.

Our homes and possessions hold a great deal of different types of materials in which we can reuse and upcycle into new items. Once you breakdown how different types of materials are used, the possibilities are endless. Scan your home and surroundings, I’m sure you’ll find a lot of resources.

Upcycling Fabric Shower Curtains

December 5, 2017August 12, 2018 / Yen-Van Tran / 2 Comments

12.05.2017

0600

Materials:

Two 72″ x 72″ Fabric Shower Curtains

Tools:

Sewing Machine
Sewing Kit

Fabric Shower curtains are usually made with polyester fabric. A few years ago, I had ordered extra fabric shower curtains and I really wanted to use up the material. I had previously posted a quick blog post about using fabric shower curtains as temporary screens for doors in Alternative Screen For Doors.

But now I wanted to see if I could upcycle the material again for another purpose. This upcycling project works well if you have solid color curtains. I wanted to create a sheer curtain layer to hang with each of the three sets of my existing window curtains. I thought it would be interesting to upcycle my extra fabric shower curtains to sheer curtains for my windows. I still like the patterns I choose and with the sheer curtains up against my windows, the patterns would be illuminated as the sun hit them each morning.

So I took down each of my existing window curtains and measured them to see how much fabric I needed from the shower curtains. The width of the window wasn’t a problem since I had 72″ to work with. The only variable was the height of each curtain.

For my multicolored shower curtain, I divided the shower curtain in half length wise and width wise equally. I had planned to use the top half of this curtain to create my first sheer window curtain set. The bottom half would be combined with the top half of the bamboo curtain, to create the third set of window curtains.

For my bamboo print shower curtain, I measured the height that I initially wanted starting from the bottom of the curtain. I did this because I wanted the second curtain set to be completely covered by the pattern. I left the white void at the top of the bamboo curtain because I knew I was going to use it in the third set of window curtains. I had planned to sew the top half of the bamboo shower curtains to the bottom half of the multicolored shower curtain to create the last set of sheer window curtains.

I then pinned the edges that had been cut using sewing pins and hemmed them to clean up the trim around the shower curtain.

Since the width of each shower curtain piece was wider than the individual window curtain pieces, I tucked and folded the shower curtain pieces to fit each window curtain width accordingly. I only sewed about 6″ up the shower curtain piece to hold the folded in piece in place, and across the bottom. You can sew the entire height of the folded piece, but I simple choose not to.

Since I know I want to keep these curtain designs as is, I decided to sew the new sheer curtain layer to my existing window curtains. You don’t have to sew them, you can use safety pins as a temporary solution if you’re not sure about keeping the sheer layers, or if you want to change them out. Make sure you decide which side of the sheer curtain you want to face towards the window and which side of your existing window curtain you want to face inwards into your home. I personally don’t care about what my curtain looks like to the outside world so I have the nicer pattern facing inwards. This is why adding a sheer layer helps the presentation of my curtains to the outside world.

To secure my curtains, I had initially made cord tiebacks with leftover material from an old bed sheet, in order to keep my curtains open. With the new sheer layer, I can tie back the solid color window curtain and leave the sheer layer or I can wrap them both back to let in even more sunlight.

Design Life Hacks

Minimalist, Zero Waste Lifestyle, Life Hacker

upcycle

Sofa Armrest Organizer

TerraCycle Programs

Mending Items Versus Buying Items

Reusable Facial Cotton Pads

Upcycling A Shoe Organizer

Quick T-Shirt Pocket

Zero Waste Week 2018

What’s In My Purse?

Upcycling Milk Crates to a Shoe Rack

Upcycling Denim Jeans

As a bonus…

Emergency Oil Candles

However…. I wasn’t satisfied with this design because I wanted the flame to burn right up against the surface of the oil.

Creating Fabric Boxes

Upcycled Coat Rack From Spoons

Upcycling Fabric Shower Curtains

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

As a bonus…

Share this:

Like this:

However…. I wasn’t satisfied with this design because I wanted the flame to burn right up against the surface of the oil.

Share this:

Like this:

Share this:

Like this:

Share this:

Like this:

Share this:

Like this: