Sofa Armrest Organizer

October 14, 2019October 14, 2019 / Yen-Van Tran / Leave a comment

10.14.19

0600

Materials:

Two Curtains at 5′-10″ in length

Tools:

Sewing Machine
Sewing Kit

I have an extra set of curtains, which I didn’t want to use anymore. I decided to create a sofa armrest organizer with both curtain pieces. Both curtain pieces were 5 foot 10 in length, and 27 inches wide.

I wanted my sofa armrest organizer to sit at a certain height off the ground, but I also wanted the top half to also tuck underneath the couch cushion. I first measured how high off the ground I wanted my couch armrest organizer. Since I needed to hang it over the sofa armrest and then wrap back over the arm to tuck underneath the cushion, that left about 47 inches to tuck underneath the cushion.

I wanted to store books in the first organizer, which would be fairly heavy, so I needed a lot of the material to tuck under the seat cushion to hold it in place. I actually wanted the top part of the organizer to tuck underneath an entire sofa cushion width, due to the weight that would be applied.

FIRST SOFA ARMREST ORGANIZER:

When I measured out my first design, I wanted the pockets for my books to be 14 inches in height. I first hemmed all of the edges and then I folded one edge to create the 14″ tall pockets. I sewed around the edge of the folded piece (yellow arrows) and then divided the pocket in half, and sewed a dividing line down the center to create two tall pockets (red arrow). These pockets will be able to hold my books and paperwork that I’m currently working on. I wanted my pockets to be a bit taller than the standard paper size (8.5″ x 11″), due to the fact that I knew the width of the pocket might eat up some of the height. I also wanted to be able to hide my books and paperwork, so my pockets wouldn’t look like they were overflowing with paper.

To attach the sofa armrest organizer, I removed the couch cushion on the side of the couch, located how high I wanted to hang the organizer, and then replaced the couch cushion. Since the top half of the fabric organizer is tucked under the couch cushion, it stayed in place.

SECOND SOFA ARMREST ORGANIZER:

I also wanted to create a second design, which would have smaller pockets for smaller items. My second design would have 10 inches in height for the books, and 6 inches for smaller objects.

Using the same sewing method as the first design, I hemmed all of the edges of the fabric material, and then measured 16″ of material at one end. I folded up the 16″ material, sewed along the outside edges of the tall pocket (yellow arrows), which created a giant 16″ tall pocket.

I then took the bottom 6″ of the pocket and folded it up, to create a shorter 6″ pocket at the bottom. This 6″ tall pocket also helped create the 10″ pocket behind the smaller pockets. I then sewed on both of the side edges of the fabric piece (red arrows) and then sewed a dividing line (blue arrow) to create a total of four pockets for this design. I sewed the edges of this design, all the way to the top of the pocket to reinforce the side edges.

Using the same method as the first sofa armrest organizer, I located where I wanted the organizer to hang on my armrest and I tucked the top half of it under the couch cushion on the end.

Since these sofa armchair organizers are made of fabric material, I can toss them into the washing machine and wash them easily. I can also fold them up and put them away if I don’t need to use them. Fabric is my favorite material to work with since it can be taken apart and reused multiple times. I love that it is a very flexible medium and I was able to put my old curtains to good use.

TerraCycle Programs

September 16, 2019September 16, 2019 / Yen-Van Tran / Leave a comment

09.16.2019

0600

TerraCycle offers a range of free programs that are funded by conscientious companies, as well as recycling solutions available for purchase for almost every form of waste.

TerraCycle offers free recycling programs funded by brands, manufacturers, and retailers around the world to help you collect and recycle your hard-to-recycle waste. Simply choose the programs you’d like to join; start collecting in your home, school, or office; download free shipping labels; and send us your waste to be recycled. You can even earn rewards for your school or favorite non-profit!

TerraCycle reuses, upcycles, and recycles waste instead of incinerating or land filling it. This moves waste from a linear system to a circular one, allowing it to keep cycling in our economy.

You can collect points, by collecting trash for your specific program and then redeeming your points. You can redeem your points by either receiving a cash value, or you can donate the points to charity. There’s a list of charities that team up with TerraCycle, in which you can choose to donate your points to.

I always donate my points, since I think this program is a great way for charities and companies to get involved with creating less waste, and I really don’t value the cash redemption as much.

Some of the charity organizations I was looking at to donate my points were:

100 points = Help safeguard 1 acre of rain forest for 1 year in the Northwest Gaia Amazon.
1 point = Help http://www.Carbonfund.org to reduce a 2 pounds of emissions from the atmosphere.
1,000 points = Help http://www.Carbonfund.org to reduce a metric tonne or 2,205 pounds of emissions from the atmosphere.
300 points = Have a tree planted in an American forest through Arbor Day Foundation
300 points = You can provide one year’s supply of clean drinking water to a person who otherwise would lack access to this most essential element.
625 points = You can help the D’Addario Music Foundation give one child a free music lesson.
2500 points = You can help the D’addario Music Foundation provide a child with 4 music lessons for a week. Kids who study music are 5x more likely to stay in school, graduate on time and apply to college.
100 points = For every 100 points, TerraCycle will send $1 to the American Red Cross to provide aid to those affected by natural disasters.

For this round, I decided to split my points between a couple of different charities. I decided to redeem my points with:

Providing one year’s supply of clean drinking water to a person who otherwise would lack access to this most essential element
Help http://www.Carbonfund.org to reduce emissions from the atmosphere

If you want to participate in the TerraCycle programs, check them out at https://www.terracycle.com/en-US/select-country to see which programs you can join. The participating companies change often, so check back with the website to see updates. There are a lot of programs to choose from and supporting the partnership between TerraCycle and the participating companies creates more awareness to how much trash we produce, and how companies take responsibility for the trash they pass onto us consumers.

Mending Items Versus Buying Items

July 29, 2019August 5, 2019 / Yen-Van Tran / Leave a comment

07.29.2019

0600

If you read about my Fast Fashion post, it relates to this one. If not, please go check it out. Even though I do by thrift store items, I will still mend an item to save it from a donation. Sometimes I will mend my items and then I donate the item. For instance, I found an old shirt at my aunts house. It had a few holes in it but overall, I liked the color and I didn’t mind the cut of the shirt. The color went perfectly with my color palette for my capsule wardrobe, so I really wanted to save it from being donated. I just needed to mend the shirt, so it would be decent to wear.

Now I have an almost new shirt.

Whenever I upcycle clothing, I always keep scraps of the leftover clothing item. In my Reusing Fabric and Thread blog post, I wrote about keeping my fabric scraps in a small bag. I literally have a bag of scraps. I love fabric, and the use of fabric in different products, (depending on the thread count, material, and the way fabric is sewn together,) can be a very durable material.

Some shirts have higher thread counts, which lends them to become excellent candidates to upcycle into grocery bags, or other heavy duty bags. The smaller scraps that I keep, I always try to find a use for them. Whether it’s going to be upcycled into a small project or large project, the one thing I can count on is that I can throw it in the washing machine to clean it.

If I had a choice to make, with picking and choosing reusable products, I prefer to choose items that I can wash easily. I don’t like to buy items which require a special cleaning method or liquid to clean. I like to sew and mend items, because the product that I’m usually mending, only needs to be washed with soap and water.

If you reflect on the products that you use daily, the majority of them are probably sewn together: your clothes, handbags, wallets, car seats, bedding, upholstery, etc. Knowing how to sew and understanding how to repair fabric products has been a life saver for me. I actually learned how to sew by hand, and didn’t learn how to use a machine until years later.

Learning how to mend items can save you money, time and stress. Even the simple act of sewing on a button is helpful. You can save a simple dress shirt, like I did, from sending it to a donation station.

Upcycled Coat Rack From Spoons

January 9, 2018August 12, 2018 / Yen-Van Tran / 1 Comment

01.09.2018

0600

Materials:

Wood board (18 inches long x 5 inches wide 1-1/2 inches deep)
Four 3 inch wood screws
Ten 1-1/2 inch wood screws
5 Spoons

Tools:

Power Drill
Power Screwdriver
Needle Nose Pliers
Slip Joint Pliers
Safety glasses
Gloves

So I wanted to make a coat hanger but I didn’t want to buy one. Apparently I had materials at home to make one of my own. This project is a fairly easy DIY for any of you who are curious.

My board was 18 inches wide and I wanted a minimum of 1 inch on each side, for margins. This left me with 16″ to work with. So initially I wanted to use 7 spoons for the hangers, but after I measured the distance, I decided to only use 5 spoons.

I divided the board up into three sections. The height of my board was 5-1/2″, but if you don’t want to use numbers, simply take a piece of paper and fold it into thirds. Then with a pencil, mark the first line and then the second. I wanted to offset my rows of spoons so the red line is for the top row of spoons and the green line is for the center of the bottom row of spoons.

Where the red line and margins intersect is where I drilled my top mounting holes. My bottom mounting holes is where the green line and the margins intersect. These holes are marked by the yellow circles in the image.

For the spoons, I wanted to drill 2 holes to mount each spoon and I knew I had to create hooks by manipulating the spoons. I picked out a drill bit that was a similar size diameter of my screws I was going to use on the spoons. Usually I choose a drill bit smaller than my screw, but that working with wood only. When working with metal, you want a drill bit that the same size as the screw since metal won’t give. Also, if you don’t choose a drill bit smaller than your screw, there’s a good chance you’ll strip the screw’s threads as you drill.

The green line marks the point of where I wanted my spoons to bend upwards, so they could be used as hooks.

When I drilled the holes, I wore gloves and my safety glasses because the metal slivers would fly off of the power drill. I applied slow but steady pressure while holding the spoon still and then I dumped the metal shavings into one side of my purple container. I did this to contain the shavings but also because it would be easier to discard them after I finished.

I first started bending the spoons by using the edge of my step ladder, then I used my Slip Joint Pliers to hold the spoon while using the Needle Nose Pliers to bend the spoons into hooks.

Once all of the spoons had holes drilled into them, I spaced the spons apart from each other in three inch increments. I proceed to attach the spoons to the board. For the wall mount attachment holes, I sunk the holes into the wood so that there was a slight design detail. I initial had made 2 drill holes so that I could mount it to the stud in the wall (those are the extra holes you see floating on the left half of the board), but I changed my mind and decided to directly attach it to the drywall instead. Because I was planning to use three inch screws, I knew that mounting it to the drywall wouldn’t be a problem.

But because I changed my mind on which drill holes I wanted to use to mount the coat rack, I now had two random holes that looked out of place. To fix this, I mirrored the holes to the other side of the board and then filled in the extra holes will extra wood filler we had left over.

I centered my coat rack and attached it to my wall. As you can see, the mistake holes look like design elements with the wood filler.

So there it is, my coat rack made from spoons. These spoons are a few extra spare spoons from my mother’s kitchen and I really like that I was able to upcycle these extra spoons, knowing that a part of her kitchen was now used in an item I really needed. It’s a nice homage to my mom in a subtle way.

Our homes and possessions hold a great deal of different types of materials in which we can reuse and upcycle into new items. Once you breakdown how different types of materials are used, the possibilities are endless. Scan your home and surroundings, I’m sure you’ll find a lot of resources.