Backpack Hacks

08.15.2017

0600

With all of my backpacks that I have ever owned, I hack them the exact same way as I always have. Going back as far as middle school, I always had to hack my backpacks. It was my way of customizing my carrier to my exact needs and over time I would edit it as my needs changed. Within each compartment I always created some type of hanging or attachment mechanism to hang my water bottles, extra bags within the compartments or hang something I needed access to immediately. most of the time I hung items that I needed access to so that those items weren’t at the bottom of my bag, where I had to go digging around to look for them.

Front of the backpack

  • I always attach extra reflectors so that in low light, vehicles or any type of light can bounce off of my backpack and I can be visible. These reflecting straps are for bikers, but I took two of the straps and weaved them through my exisitng strap set up.
DSC_4842
  • For all of my zippers that open to significant compartments, I always sew a section of the zipper, so it limits the access to that compartment to only one direction of movement for the zipper. I prefer to only have access in one direction for the zipper movement so it’s easier to watch over and maintain. I also attach metal rings right below the point of the sewing block (through the exposed zipper tape) so that I can use this ring to lock my carabiners from the outside but to also hang items on the inside of the bag.
DSC_6510
DSC_6526
  • On the inside, I hook extra interior metal rings with carabiners to the exterior rings that are popping through the tape so I can hang items on the inside. I’ll hang my water bottle from these interior rings (when my external water bottle pocket has my coffee tumbler in it) or small bags so I can keep items separated in the same compartment. These interior rings are there for anything that needs to be hanged or utilized.
00-eas.260.2007_010_01
DSC_6511
DSC_6513

Sides of the backpack

  • I also sew blocking for my smaller compartments and create a locking system for these pockets as well. For the smaller pockets, it really just depends how and where you want to secure the pocket. I chose to insert an extra ring so that I could attach an extra carabiner to it and lock the zipper with it.
DSC_6533
DSC_6534
  • For my external water bottle pocket, I usually take one of the extra backpack straps (that I trimmed off)  to create a safety strap for the external water bottle pocket so that it can hold taller water bottles more securely. There have been a few incidents where my external water  bottle pocket wasn’t deep enough and due to the fact that I had so much stuff in my backpack, my water bottle managed to get squeezed out of the pocket.
DSC_6518

Back of the backpack

  • I usually trim the extra strap slack that comes with the backpack straps. I don’t like any loose hanging straps so I will measure how high I want to carry my backpack and trip, then hem the straps accordingly.
  • For my backpack straps, I like to keep my smaller items very close to me. So I will attach some type of pocket (large enough to fit my “wallet” items and my cell phone) to the front. This backpack didn’t come with a pocket for those types of intimate items.
DSC_6538
DSC_6537
DSC_6540
  • I also ALWAYS, ALWAYS attach an extra carabiner to the other strap, so I can hook my keys onto my strap quickly.
DSC_6531 - Copy.JPG

So there you have it, those are the hacks I made for this backpack. This is my day to day back pack, so I’ll run to the store or go hiking with it. I do have another hiking backpack that’s a 65 gallon capacity for traveling and I’ve hacked that accordingly as well. Hopefully you may see a hack i described here that you would like to use on your own backpacks or carrying bags that you may want to use.

Created Slim Hanging Organizers

08.01.2017

0600

Materials:

  • Three 7 inch-8 centimeter, white zippers (for one pillowcase design)
  • Two 12 inch, pink zippers (for the second pillowcase design)
  • Two Velvet Hangers

Tools:

  • Sewing Machine or sew by hand

I always try to take up less space than necessary when it comes to my home. It’s not that I dont’ have the room to spread out, but I personally don’t think it’s necessary. I don’t like my items and possessions spread out over a large space because it takes more energy to find things and living a more compact lifestyle helps me keep my possessions to a minimum. As a designer, it’s an interesting challenge to minimize the space that I take up.

So I decided to create a slim organizer for my closet. I had a hanging closet shelf but I wanted to get rid of it. In order to get rid of it, I still needed some type of organizer in its place. The items that I needed to organize were small clothing items as well as small accessories. This slim organizer only needed to hold the weight of those items. I did move some stuff out of the original hanging shelf to other areas of the house, so what you see in the images below isn’t a direct transfer of items to the new slim organizer.

Hanging organizers actually already do exist in stores, but from what I’ve seen, these organizers tend to have the user access the pockets from the front of the organizer. It would be easier for a person who has a walk-in closet to use those organizers, but I wanted to make a slim organizer which I could access from the side.

So in the end, this organizer helped me reduce my space by half:

dsc_48972017-07-25

Here is what I did…

DSC_6000

I gathered my pillowcases and designated one of the pillowcases to be divided into three sections and the other pillowcase would be divided into two sections.

I took one pillowcase and hemmed the open end of the pillowcase. I then folded the pillow case into thirds and marked the lines using sewing pins. This pillowcase would have the three 7 inch-8 centimeter, white zippers sewed to it.

 

DSC_6008 - Copy

I sewed along the lines to close off the three separate sections, then I placed my zippers down to mark the location of the zippers. Depending on how I wanted to access my slim organizer in the closet, I had to choose which side of the pillowcase to attach the zippers. Since I wanted this slim organizer to be on the right side of my closet, I wanted the openings on the right side of the pillowcase so that when it was hanging up, I could access the slots easier. I also left about an inch margin between the zipper and the edge of the pillowcase because the items inside will create a bulge that I had to take into consideration.

I used an ink pen to make tiny dots at each end of the zipper. I actually marked the dots in between the zipper teeth at each end, this way, it also centered the location of the zipper. I connected each set of dots to create the cut lines in order to fit my zippers into the pillowcase. I just used scissors to cut these lines.

 

DSC_6046DSC_6050

DSC_6009- Copy

After I cut the lines, I inserted the hanger into the opening that was on the end of the pillowcase that was originally closed. I folded the pillowcase in half (vertically) to find the center and pretty much wedged the metal hook through the pillowcase. I chose to place my hanger on the original closed end of the pillowcase because if I used the hemmed end of the pillowcase for the hanger, the weight of the items in the organizer might weaken the that end of the pillowcase over time. I had to consider the weight of each pocket that was created, so I constantly thought about the overall weight that would pull on the material itself.

Once I placed my zippers into each slot that was made, I folded the edges of the pillowcase down to the zippers and pinned them together with sewing pins. Then I hand sewed the zippers to the pillowcase (making sure I sewed both the hemmed layer and the top layer of the pillowcase to the zipper).

DSC_6016

DSC_6021.JPG

Once I was done, I used the same process to create the double pocket slim organizer. The triple pocket slim hanging organizer will be used for small items and the double pocket slim organizer will be used for some extra pieces of clothing items.

I don’t know if this is a favored design, but I personally like how much less space it takes up. this design works for me and, my space. Hopefully this design may jog some space organizing ideas for you as well.

DSC_6028

DSC_6052

DSC_60622017-07-25